|Appearance||Gray Paste||Flash Point (Deg. F)||136 deg. F|
|Chemical Style||Sealing Compound||Item||Ultra Rubber Sealant and Dressing|
|Container Type||Tube||Pack Quantity||1|
|Flammable||Yes||Temperature Range (Deg F)||-65 to 400 deg. F|
Formulated specially for rubber gaskets, it conditions gaskets for longer life and seals potential leak paths. It also functions to hold gaskets in place during installation. The non-hardening, soft-setting formula makes gasket repositioning quick and easy. Provides outstanding oil and fluid resistance. Temperature range -65F to 400F (-54C to 204C).
1) Clean flange surfaces thoroughly.
2) Pierce top of tube with back of cap and apply a thin even coat of Ultra Rubber Gasket Sealant & Dressing to all sides of gasket. Allow to air dry until it becomes somewhat tacky.
3) Align gasket, press into place and assemble.
4) Tighten to specified torque values.
WARNING: This product can expose you to chemicals including Titanium dioxide, which is known to the State of California to cause cancer, and Methanol, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Lot tracked item
|VMRS (ATA) CODES||053-999-097||ULTRA RBBR GSKT SELANT|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here