Share
Print
ASSOCIATED EQUIPMENT
Associated Equipment Manual, Mounted Bus Bar; For Battery Voltage: 12 V DC
Technical Specifications
Key Specifications
AC Cord Length
6-1/2 ft.
Mfr. Part Number
6075S
Automatic/Manual
Manual
Overall Depth
31 in.
Brand
ASSOCIATED EQUIPMENT
Overall Height
5 in.
Cable Gauge
10 AWG
Overall Width
15 in.
Cable Length
5 ft.
Package Quantity
1
Charger Style
Mounted
Shipping Weight
24.5 lb.
For Battery Voltage
12 V DC
Test Feature
No
Indoor/Outdoor
Indoor
Timer
No
Item
Bus Bar
Voltage Range
12 V
Material
Copper, Rubber, Steel, Fiberglass
Wire Gauge
8 AWG
General
Includes
10 Pairs of DC Charging Leads
Product Description
10 Battery Bus Bar With Microprocessor
- Bus Bar Set For Parallel Charging Batteries.
- Can Charge Up To 10 Batteries.
- Microprocessor Controller Montitors Each Circuit Against Over Charging, Detects Bad Batteries And High Heat Build-Up In Batteries.
- Status LED For Each Circuit.
- Use One Or Combine Additional Bars For Added Capacity.
- Insulatd Fiberglass Backboard.
- 10 Pairs Of 300Amp Dc Charging Clamps With 60" Long 8 Awg Cable Included.
- Includes 3Ft Long 4 Awg Cable To Connect To Charger Or Additional Bus Bar.
- Can Be Mounted On Wall Or Bench.
- Cross Reference: 6075S
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Diisononyl phthalate (DINP), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Item Barcode
Bus Bar 10 Battw/Microprocesso
Name | Item | Description | |
---|---|---|---|
UNSPSC CODES | 60104912 | ||
VMRS (ATA) CODES | 032-005-005 | BUS BAR 10 BATT MICROPR |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here