Product Categories See All
Track Order Status
Sheet 0077910Printer Friendly View
Safety Data Sheet Date of Issue: |Revision Date: 21/1/15 |Revision Number: Imperial Supplies Part Number: 0077910 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: Fluorescent dye for coolant systems and auto body inspection, TP-3900 CAS No: Synonyms: TP-3900, TP-3900-0001, TP-3900-0001CS, TP-3900-0008, TP-3900-0012, TP-3900-0016, TP-3900-0032, TP-3900-0100, TP-3900-0500, TP-3900-0601, TP-3900-12025, TP-2401, TP-3900-5500 1.2. Intended Use of the Product Use of the substance/mixture: Leak Detection 1.3. Name, Address, and Telephone of the Responsible Party Company Tracer Products, a Division of Spectronics Corporation 956 Brush Hollow Road Westbury, New York 11590 Phone: 800-641-1133, 516-333-1254 1.4. Emergency Telephone Number Emergency |US & Canada 800-424-9300 (24 HOURS) CHEMTREC; Call collect outside number |continental US & Canada: 703-527-3887. SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) This product | is not | classified as | hazardous | according to | the GHS. | | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |No | | | | | |Pictogra| | | | | |m | | | | | |required| | | | | Signal Word (GHS-US) |None Hazard Statements (GHS-US) | Precautionary Statements | (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: 2.4. Unknown Acute Toxicity (GHS-US) This product is not classified as hazardous according to the GHS. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Deionized Water |7732-18-5 |75-95 | Fluorescent Dye |See Below |5-25 | | | | | | | | | | Fluorescent Dye: The specific identity and composition has been withheld as a trade secret. NJTSRN: 80100312-5009 SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: Remove to fresh air. If symptoms develop, seek immediate medical attention. If not breathing, give artificial respiration. First-aid Measures After Skin Contact: Wash affected area with soap and water and rinse thoroughly. If irritation develops, consult a physician. First-aid Measures After Eye Contact: Flush eyes with water for 15 minutes. If irritation develops, consult a physician. First-aid Measures After Ingestion: Give water. Call a physician immediately. Do not induce vomiting. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed Aggravation of Existing Conditions: Exposure to this product is not expected to contribute to, worsen or aggravate any existing medical conditions. Most Important Symptom: Treat symptomatically. SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Based on the NFPA guide, use dry chemical, carbon dioxide, water mist, water jet sprays, halogen, or alcohol foam suitable for Class B fires. Use water to cool containers exposed to fire. For large fires, use water spray, fog or alcohol foam, thoroughly drenching the burning material. Unsuitable Extinguishing Media: High volume water with full jet. Oxidizers and reducers. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: May liberate irritating or toxic vapors during combustion or decomposition. Explosion Hazard: Smoke, soot, and toxic/irritating fumes (i.e., carbon dioxide, carbon monoxide, etc.). Oxides of nitrogen and carbon. Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Protection During Firefighting: Fire fighters and others who may be exposed to the products of combustion should be equipped with NIOSH-approved, positive-pressure, self-contained breathing apparatus (SCBA) and full protective clothing. Water can be used to cool and protect containers and surroundings. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: 6.1.1. For Non-emergency Personnel Protective Equipment: General Advice: Avoid inhalation and contact with skin, eyes, or clothing. Wash hands and face before eating, drinking, or using tobacco products. Personal Protective Equipment Needed: Wear impervious gloves, shoes, and protective clothing. Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: Suitable Protective Gear: Wear impervious gloves, shoes and protective clothing. Unsuitable Protective Gear: Not Applicable. 6.2. Environmental Precautions Prevent any contamination of local soils and water supply. Prevent ground water infiltration or any ground penetration. Avoid the spreading or entering into watercourses by using sand, soil, or other types of barriers. If contamination into water course or sewage system, alert appropriate authorities. 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: Contain with absorbent material, such as clay, soil, universal binding medium, or any commercially available absorbent. Shovel reclaimed dye and absorbent into a recovery or salvage drums for disposal. For larger spills, transfer to a salvage tank for recovery or safe disposal. Any residues should be treated like a small spill. This is not a RCRA hazardous waste per Title 40 CFR 261. Stop material from contaminating soil, or from entering sewers or bodies of water. For larger spills, transfer to a salvage tank for safe recovery/disposal. Residues are treated as small spills. Disposal: Either incinerate or land fill in accordance with applicable local, state and federal regulations. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Use product only in well ventilated areas. Avoid breathing in mists or vapors from a heated product. Avoid formation of mists. Avoid heating product near flash point. Avoid prolonged or repeated contact with skin. Handle in ambient temperature. Hygiene Measures: Wash hands before breaks and at the end of the work day. Do not carry cleaning clothes used to absorb product in clothing. General hygiene measures for chemicals apply. Wash thoroughly after handling, especially before eating, drinking, smoking, or using restroom facilities. 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Empty Container Precautions: Do not reuse empty container for any purpose. Special Warnings: Hot organic chemical vapors or mists can suddenly and without warning combust when mixed with air. Storage Conditions: Store in a cool, dry, well-ventilated area away from heat, ignition sources, and direct sunlight. Always keep containers tightly closed. Store away from oxidizing and reducing agents. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters 8.2. Exposure Controls Appropriate Engineering |Maintain airborne concentrations below the Controls |established exposure limits by providing adequate |ventilation. General (dilution) ventilation should |be acceptable. Additional local exhaust ventilation |is recommended where dusts, mists or vapors may be |released. Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection |When in contact with material, be sure to use proper |gloves approved to standards (Europe: EN 374, U.S.: |F739, & AS/NZS: 2161). Gloves made from neoprene, |nitrile or butyl rubber may provide suitable |chemical protection. Eye Protection |Wear safety goggles with peripheral coverage |approved to EU Standard EN 166, AS/NZS 1337. An eye |wash facility should be readily available. Skin and Body Protection |Wear protective clothing and appropriate impervious |gloves. Respiratory Protection |Avoid breathing vapor and/or mist. If occupational |exposure limits are exceeded wear NIOSH/OSHA |approved equipment. Use a respiratory protection |fitted with a combination filter A-P3 for short term |use. High airborne concentrations may necessitate |the use of self-contained breathing apparatus (SCBA) |or a supplied air respirator. Respiratory protection |programs must be in compliance with 29 CFR 1910.134. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Liquid Appearance |Brown Odor |odorless Odor Threshold |No data available pH |9 Relative Evaporation Rate |No data available (butylacetate=1) | Melting Point |No data available Freezing Point |No data available Boiling Point |>100�C Flash Point |No data available Auto-ignition Temperature |Product is not self-igniting Decomposition Temperature |No data available Flammability (solid, gas) |No data available Vapor Pressure |No data available Relative Vapor Density at 20 �C |No data available Relative Density |No data available Specific Gravity | Solubility |in Water: 100% Partition coefficient: |No data available n-octanol/water | Viscosity |no data available Lower Flammable Limit | Upper Flammable Limit | 9.2. Other Information Volatile Organic Content (VOC) Component: None SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity This product is non-reactive under ambient conditions. 10.2 Chemical Stability Stable under normal conditions of use. Can decompose slowly with localized heating over 300 Deg C 10.3 Possibility of Hazardous Reactions Hazardous Polymerization: Will not occur. 10.4 Conditions to Avoid High temperatures & a source of ignition. Toxic fumes may be released if product is heated above decomposition point. 10.5 Incompatible Materials Strong Acids, Strong oxidizing agents, and Reducing agents 10.6 Hazardous Decomposition Products In the event of combustion, CO, CO2, aldehydes and other asphyxiants will be formed. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: Germ Cell Mutagenicity: Carcinogenicity: According to ACGIH, IARC, NTP, and OSHA, the deionized water and the fluorescent dye are not considered to be a hazardous carcinogen to humans. Reproductive Toxicity: No data available. Specific Target Organ Toxicity (Single Exposure): May cause mild respiratory irritation. Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: No data available. Symptoms/Injuries After Inhalation: Processing vapors can cause irritation to the respiratory tract. Symptoms/Injuries After Skin Contact: Irritation can occur following prolonged or repeated contact. Symptoms/Injuries After Eye Contact: May cause mild eye irritation. Symptoms/Injuries After Ingestion: May cause gastrointestinal irritation. Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity 12.2. Persistence and Degradability No data available 12.3. Bioaccumulative Potential No data available 12.4. Mobility in Soil No data available 12.5. Other Adverse Effects SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Recover or recycle if possible, otherwise, dispose of in accordance with all local, state, and federal regulations. Sewage disposal is discouraged. General Statements: Federal regulations may apply to empty container. State and/or local regulations may be different. Additional Information: Special Instructions: Be sure to contact the appropriate government environmental agencies if further guidance is required. Do not remove labels from container until container is cleaned properly. Containers can be reused or disposed of by landfill or incineration if appropriate to local law. Water with cleaning agents is required. Hazardous Waste Number: Not a RCRA hazardous waste. SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Not Regulated Hazard Class | |<PICTOGRAM PHRASE> Identification Number|Not Applicable | Label Codes |Not Applicable | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |Not Applicable Hazard Class |Not Applicable Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name |Not Applicable Identification Number|Not Applicable |<PICTOGRAM PHRASE> Hazard Class |Not Applicable | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> SARA Title III Information: This product contains no chemicals subject to the reporting requirements of Section 313 of the emergency planning and community right to know act. Section 313-Toxic Chemicals: No regulated ingredients. CERCLA: No regulated ingredients. SARA Section 311/312 Hazard Classes |Fire Hazard: No |Sudden Release of Pressure Hazard: No |Reactivity Hazard: No |Immediate (Acute) Health Hazard: No |Delayed (Chronic) Health Hazard: No Toxic Substances Control Act (TSCA) |Deionized Water: TSCA |Fluorescent Dye: TSCA |The chemical components of this product are |listed on the Section 8(B) Chemical Substance |Inventory List (40 CFR 710). 15.2 US State Regulations <COMPONENT> Pennsylvania - New Jersey R-T-K: NAME CAS NO. or NJ TSRN %W Deionized Water 7732-18-5 75-95 Fluorescent Dye NJ TSRN 80100312-5009 5-25 California - California Proposition 65: This product contains no chemical(s) known to the state of California to cause cancer. SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |21/1/15 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this '' shall be created or inferred by any statement in this ''. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this ''. The user is responsible for full compliance.