Product Categories See All
Track Order Status
Sheet 0077810Printer Friendly View
Safety Data Sheet | | Date of Issue: |Revision Date: |Revision Number: Imperial Supplies Part Number: 0077810 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: Textile fiber glass with polypropylene (PP) Continuous filament fiber glass with a polypropylene (PP) CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: 1.3. Name, Address, and Telephone of the Responsible Party Company U.S LINER COMPANY 19 Leonberg Road Cranberry Township, PA 16066 Phone: (724) 776-4044 1.4. Emergency Telephone Number Emergency | number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) | | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) | | | | | | Signal Word (GHS-US) | Hazard Statements (GHS-US) | Precautionary Statements | (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Glass, Oxide, Chemicals |65997-17-3 |Maximum | | |75% | Polypropylene homopolymer |9003-07-0 |Maximum | | |75% | | | | | | | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: Acute Inhalation: Temporary upper respiratory irritation when machining. First-aid Measures After Skin Contact: Acute Skin Contact & Sensitization: Temporary skin irritation seen in certain individuals. First-aid Measures After Eye Contact: Acute Eye Contact: Temporary eye irritation. First-aid Measures After Ingestion: Acute Ingestion: Unlikely. Contact physician if unusual reaction is noted. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Remove to fresh air. Administer oxygen & get medical help. Symptoms/Injuries After Inhalation: Remove from exposure. Get medical help if irritation persists. Symptoms/Injuries After Skin Contact: Cleanse with soap and water. Get medical help if irritation persists. Symptoms/Injuries After Eye Contact: Flush well with running water for at least 15 minutes. Get medical help if irritation persists. Symptoms/Injuries After Ingestion: Unlikely. Consult physician if unusual reaction is noted. Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed Remove to fresh air. Administer oxygen & get medical help. Information for Medical Practitioners: Skin irritation responds well to mild Hydrocortisone cream. SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Use that which is applicable to surrounding fire. Dry Chemical, CO2 or Halon. Unsuitable Extinguishing Media: 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Fire fighters must wear full protective gear including eye protection and self-contained breathing apparatus. Explosion Hazard: Materials may thermally decompose or burn emitting toxic fumes and smoke including, but not limited to, benzoic acid, glycol, various hydrocarbons and oxides of carbons. Molding at temperatures above 450�F releases. Hazardous decomposition products. Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Fire fighters must wear full protective gear including eye protection and self-contained breathing apparatus. Protection During Firefighting: SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: Spills/Leaks: Vacuum dust deposits. Accidental or Unplanned Releases: Clean area with vacuum or wet methods. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Glass, Oxide, Chemicals 65997-17-3 OSHA PEL Total nuisance dust: 15 mg/m3 Respirable nuisance dust: 5 mg/m3 ACGIH TLV TWA Synthetic Vitreous Fibers: 1 f/cc, continuous filament glass fibers NIOSH REL Total glass dust: 5 mg/m3 Respirable fibers: 3 f/cc Polypropylene homopolymer 9003-07-0 None None None 8.2. Exposure Controls Appropriate Engineering | Controls | Personal Protective Equipment| Materials for Protective |To reduce skin irritations or burns during machining Clothing |or forming. Hand Protection | Eye Protection |Wear eye protection (goggles, safety glasses or face |mask). |Safety glasses with side shields recommended. Skin and Body Protection |Fiber glass may cause temporary skin irritation. |Wear long sleeves, gloves and |eye protection when machining. Cleanse skin with |soap and warm water and wash work clothes. Respiratory Protection |DUST IRRITATION: A disposable mask designed for |nuisance type dusts must be used when machining |and/or forming material in order to prevent |irritation to the nose or throat due to dust |particles. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Solid Appearance |Fibers assembled into rovings, mats, yarns, |fabrics, chopped strands or laminated sheets. Odor |None Odor Threshold |None pH |Neutral Relative Evaporation Rate |None (butylacetate=1) | Melting Point |PP-320 Deg F Freezing Point |None Boiling Point |n/a Flash Point |624 Deg. F Auto-ignition Temperature | Decomposition Temperature | Flammability (solid, gas) | Vapor Pressure |None Relative Vapor Density at 20 �C |n/a Relative Density | Specific Gravity |Glass=1.3- 2.2 Solubility |Small Partition coefficient: |None n-octanol/water | Viscosity | Lower Flammable Limit | Upper Flammable Limit | 9.2. Other Information SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity Not reactive. Reactivity in Water: Not reactive. 10.2 Chemical Stability Chemically stable. 10.3 Possibility of Hazardous Reactions Hazardous Polymerization: will not occur. 10.4 Conditions to Avoid 10.5 Incompatible Materials Avoid contact with alkaline materials, concentrated nitric and perchloric acids, fuming sulfuric acid and 98% sulfuric acid at 140Deg F. 10.6 Hazardous Decomposition Products SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Extensive medical-scientific research has been conducted regarding the health aspects of fiber glass over the past 50 years by the International Agency for Research on Cancer (IARC), an agency of the World Health Organization (WHO). In June 1987 IARC reviewed all of the significant research on the health effects attributed to fiber glass and determined that the data from both human and animal studies was inadequate to classify continuous filament glass fibers, such as used in our Fiber Glass Reinforcement products, as carcinogenic to humans. Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: Germ Cell Mutagenicity: None. Carcinogenicity: Ingredient: Textile or Continuous Fibrous Glass NTP: Not Listed IARC: Not Classifiable - Group 3 OSHA: Not listed Reproductive Toxicity: None Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity This product is not manufactured with, nor does it contain any Class I Ozone depleting chemicals as defined by EPA in Title VI of the Clean Air Act Amendments of 1990 40 DFR Part 82, Protection of Stratospheric Ozone. This product is not classified as a hazardous air pollutant in Title III Clean Air Act of 1990. 12.2. Persistence and Degradability 12.3. Bioaccumulative Potential 12.4. Mobility in Soil 12.5. Other Adverse Effects SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Scrap material should be disposed of in a sanitary landfill in accordance with federal, state and local regulations. Waste material is not considered hazardous as defined by RCRA (40 CFR Part 261). Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Bulitex and Versitex products are not considered as |hazardous goods by transport regulations. Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name | Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name | Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT>As this product is considered a mixture, each component is listed below identifying its status on specific regulatory lists. SARA Section 311/312 Hazard Classes | Toxic Substances Control Act (TSCA) | 15.2 US State Regulations <COMPONENT> SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date | Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this '' shall be created or inferred by any statement in this ''. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this ''. The user is responsible for full compliance.