Register Now    |    Login

National Distributor of Quality Maintenance Supplies Since 1958

1-800-558-2808

Track Order Status

Sheet 0077660

Printer Friendly View
        

Safety Data Sheet                                                                 
Date of Issue: 04/16/15    |Revision Date:             |Revision Number: 14.00    
Imperial Supplies Part Number: 0077660                                            

SECTION 1: IDENTIFICATION                                                         


1.1.  Product Identifier
Product Form:                                                                     
Product Name: 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP100NS Translucent           
CAS No:                                                                           
Synonyms:                                                                         


1.2.  Intended Use of the Product
Use of the substance/mixture: Structural adhesive                                 


1.3.  Name, Address, and Telephone of the Responsible Party
Company:                                                                          
3M                                                                                
Industrial Adhesives and Tapes Division                                           
3M Center, St. Paul, MN 55144-1000, USA                                           
Phone: 1-888-3M HELPS (1-888-364-3577)                                            


1.4.  Emergency Telephone Number
Emergency     | 1-800-364-3577 or (651) 737-6501 (24 hours)                       
number        |                                                                   

SECTION 2: HAZARDS IDENTIFICATION                                                 


2.1.  Classification of the Substance or Mixture
Classification (GHS-US)
Ex. Compressed|H280          
gas           |              
              |              
              |              


2.2.  Label Elements
GHS-US Labeling
Hazard Pictograms (GHS-US)   |        |        |        |        |        |        
Signal Word (GHS-US)         |                                                    
Hazard Statements (GHS-US)   |                                                    
Precautionary Statements     |                                                    
(GHS-US)                     |                                                    


2.3.  Other Hazards
Other Hazards Not Contributing to the Classification:                             


2.4.  Unknown Acute Toxicity (GHS-US)
                                                                                  

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS                                 


3.1.  Substance
Name                            |Product identifier   |%       |Classification    
                                |                     |        |(GHS-US)          
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  


Full text of H-phrases: See Section 16
3.2.  Mixture
Name                            |Product identifier   |%       |Classification    
                                |                     |        |(GHS-US)          
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  


SECTION 4: FIRST AID MEASURES                                                     


4.1.  Description of First Aid Measures
First-aid Measures General:                                                       
First-aid Measures After Inhalation:                                              
First-aid Measures After Skin Contact:                                            
First-aid Measures After Eye Contact:                                             
First-aid Measures After Ingestion:                                               


4.2.  Most important symptoms and effects, both acute and delayed
Symptoms/Injuries:                                                                
Symptoms/Injuries After Inhalation:                                               
Symptoms/Injuries After Skin Contact:                                             
Symptoms/Injuries After Eye Contact:                                              
Symptoms/Injuries After Ingestion:                                                
Chronic Symptoms:                                                                 


4.3.  Indication of Any Immediate Medical Attention and Special Treatment
Needed
                                                                                  

SECTION 5: FIRE-FIGHTING MEASURES                                                 

5.1.  Extinguishing Media
Suitable Extinguishing Media:                                                     
Unsuitable Extinguishing Media:                                                   


5.2.  Special Hazards Arising From the Substance or Mixture
Fire Hazard:                                                                      
Explosion Hazard:                                                                 
Reactivity:                                                                       


5.3.  Advice for Firefighters
Precautionary Measures Fire:                                                      
Firefighting Instructions:                                                        
Protection During Firefighting:                                                   

SECTION 6: ACCIDENTAL RELEASE MEASURES                                            


6.1.  Personal Precautions, Protective Equipment and Emergency Procedures
General Measures:                                                                 


6.1.1.      For Non-emergency Personnel
Protective Equipment:                                                             
Emergency Procedures:                                                             


6.1.2.      For Emergency Responders
Protective Equipment:                                                             
Emergency Procedures:                                                             


6.2.  Environmental Precautions
                                                                                  


6.3.  Methods and Material for Containment and Cleaning Up
For Containment:                                                                  
Methods for Cleaning Up:                                                          


6.4.  Reference to Other Sections
See heading  8, Exposure Controls and Personal Protection.                        


SECTION 7: HANDLING AND STORAGE                                                   


7.1.  Precautions for Safe Handling
Additional Hazards When Processed:                                                
Hygiene Measures:                                                                 


7.2.  Conditions for Safe Storage, Including Any Incompatibilities
Technical Measures:                                                               
Storage Conditions:                                                               


7.3.  Specific End Use(s)
                                                                                  

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION                                  


8.1.  Control Parameters
                                                                                  


8.2.  Exposure Controls
Appropriate Engineering      |                                                    
Controls                     |                                                    
Personal Protective Equipment|                                                    
Materials for Protective     |                                                    
Clothing                     |                                                    
Hand Protection              |                                                    
Eye Protection               |                                                    
Skin and Body Protection     |                                                    
Respiratory Protection       |                                                    
Thermal Hazard Protection    |                                                    

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES                                       


9.1.  Information on Basic Physical and Chemical Properties
Physical State                      |                                             
Appearance                          |                                             
Odor                                |                                             
Odor Threshold                      |                                             
pH                                  |                                             
Relative Evaporation Rate           |                                             
(butylacetate=1)                    |                                             
Melting Point                       |                                             
Freezing Point                      |                                             
Boiling Point                       |                                             
Flash Point                         |                                             
Auto-ignition Temperature           |                                             
Decomposition Temperature           |                                             
Flammability (solid, gas)           |                                             
Vapor Pressure                      |                                             
Relative Vapor Density at 20 �C     |                                             
Relative Density                    |                                             
Specific Gravity                    |                                             
Solubility                          |                                             
Partition coefficient:              |                                             
n-octanol/water                     |                                             
Viscosity                           |                                             
Lower Flammable Limit               |                                             
Upper Flammable Limit               |                                             


9.2.  Other Information
                                                                                  

SECTION 10: STABILITY AND REACTIVITY                                              


10.1      Reactivity
                                                                                  


10.2      Chemical Stability
                                                                                  


10.3      Possibility of Hazardous Reactions
                                                                                  


10.4      Conditions to Avoid
                                                                                  


10.5      Incompatible Materials
                                                                                  


10.6      Hazardous Decomposition Products
                                                                                  

SECTION 11: TOXICOLOGICAL INFORMATION                                             


11.1. Information on Toxicological Effects
Acute Toxicity:                                                                   
Skin Corrosion/Irritation:                                                        
Serious Eye Damage/Irritation:                                                    
Respiratory or Skin Sensitization:                                                
Germ Cell Mutagenicity:                                                           
Carcinogenicity:                                                                  
Reproductive Toxicity:                                                            
Specific Target Organ Toxicity (Single Exposure):                                 
Specific Target Organ Toxicity (Repeated Exposure):                               
Aspiration Hazard:                                                                
Symptoms/Injuries After Inhalation:                                               
Symptoms/Injuries After Skin Contact:                                             
Symptoms/Injuries After Eye Contact:                                              
Symptoms/Injuries After Ingestion:                                                
Chronic Symptoms:                                                                 

SECTION 12: ECOLOGICAL INFORMATION                                                


12.1. Toxicity
                                                                                  


12.2. Persistence and Degradability
                                                                                  


12.3. Bioaccumulative Potential
                                                                                  


12.4. Mobility in Soil
                                                                                  


12.5. Other Adverse Effects
                                                                                  

SECTION 13: DISPOSAL CONSIDERATIONS
13.1. Waste treatment methods
Waste Disposal Recommendations:                                                   
Additional Information:                                                           

SECTION 14: TRANSPORT INFORMATION                                                 


14.1 In Accordance with DOT
Proper Shipping Name |                                                            
Hazard Class         |                       |<PICTOGRAM PHRASE>                  
Identification Number|                       |                                    
Label Codes          |                       |                                    
ERG Number           |                                                            


14.2 In Accordance with IMDG
Proper Shipping Name |                                                            
Hazard Class         |                                                            
Identification Number|                                                            
Label Codes          |                      |<PICTOGRAM PHRASE>                   
ntification Of The   |                      |                                     
Substance/m          |                      |                                     
EmS-No. (Fire)       |                      |                                     
EmS-No. (Spillage)   |                      |                                     


14.3 In Accordance with IATA
Proper Shipping Name |                                                            
Identification Number|                       |<PICTOGRAM PHRASE>                   
Hazard Class         |                       |                                     
Label Codes          |                       |                                     
ntification Of The   |                       |                                     
Substance/m          |                       |                                     
ERG Code (IATA)      |                                                            

SECTION 15: REGULATORY INFORMATION                                                

15.1      US Federal Regulations
<COMPONENT>                                                                       
SARA Section 311/312 Hazard Classes |                                             
Toxic Substances Control Act (TSCA) |                                             

15.2      US State Regulations
<COMPONENT>                                                                       
                                                                                  

SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION     

Revision date   |                                                                 
Other           |This document has been prepared in accordance with the SDS       
Information     |requirements of the OSHA Hazard Communication Standard 29 CFR    
                |1910.1200.                                                       
GHS Full Text Phrases:                                                            
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             


Grainger disclaimer.








































Safety Data Sheet                                                                 
Date of Issue: 04/16/15    |Revision Date:             |Revision Number: 15.00    
Imperial Supplies Part Number: 0077660                                            

SECTION 1: IDENTIFICATION                                                         


1.1.  Product Identifier
Product Form:                                                                     
Product Name: 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP100NS Translucent, Part B   
CAS No:                                                                           
Synonyms:                                                                         


1.2.  Intended Use of the Product
Use of the substance/mixture: Structural adhesive                                 


1.3.  Name, Address, and Telephone of the Responsible Party
Company: 3M                                                                       
Industrial Adhesives and Tapes Division                                           
3M Center, St. Paul, MN 55144-1000, USA                                           
Phone: 1-888-3M HELPS (1-888-364-3577)                                            


1.4.  Emergency Telephone Number
Emergency     | 1-800-364-3577 or (651) 737-6501 (24 hours)                       
number        |                                                                   

SECTION 2: HAZARDS IDENTIFICATION                                                 


2.1.  Classification of the Substance or Mixture
Classification (GHS-US)
Serious Eye   |Category 2B.  
Damage/Irritat|              
ion           |              
Skin          |Category 1.   
Sensitizer    |              
              |              


2.2.  Label Elements
GHS-US Labeling
Hazard Pictograms (GHS-US)   |[pic]   |        |        |        |        |        
Signal Word (GHS-US)         |Warning                                             
Hazard Statements (GHS-US)   |Causes eye irritation.                              
                             |May cause an allergic skin reaction.                
Precautionary Statements     |Prevention:                                         
(GHS-US)                     |Avoid breathing dust/fume/gas/mist/vapors/spray.    
                             |Wear protective gloves. Wash thoroughly after       
                             |handling. Contaminated work clothing must not be    
                             |allowed out of the workplace.                       
                             |Response:                                           
                             |IF IN EYES: Rinse cautiously with water for several 
                             |minutes. Remove contact lenses, if present and easy 
                             |to do. Continue rinsing. If eye irritation persists:
                             |Get medical advice/attention. IF ON SKIN: Wash with 
                             |plenty of soap and water. If skin irritation or rash
                             |occurs: Get medical advice/attention. Wash          
                             |contaminated clothing before reuse.                 
                             |Disposal:                                           
                             |Dispose of contents/container in accordance with    
                             |applicable local/regional/national/international    
                             |regulations.                                        


2.3.  Other Hazards
Other Hazards Not Contributing to the Classification:                             


2.4.  Unknown Acute Toxicity (GHS-US)
                                                                                  

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS                                 


3.1.  Substance
Name                            |Product identifier   |%       |Classification    
                                |                     |        |(GHS-US)          
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  


Full text of H-phrases: See Section 16
3.2.  Mixture
Name                            |Product identifier   |%       |Classification    
                                |                     |        |(GHS-US)          
Epoxy Resin                     |25068-38-6           |85 - 94 |                  
                                |                     |Trade   |                  
                                |                     |Secret *|                  
Epoxy Resin                     |30499-70-8           |5 - 10  |                  
                                |                     |Trade   |                  
                                |                     |Secret *|                  
Amorphous Silica                |67762-90-7           |1 - 5   |                  
                                |                     |Trade   |                  
                                |                     |Secret *|                  


SECTION 4: FIRST AID MEASURES                                                     


4.1.  Description of First Aid Measures
First-aid Measures General:                                                       
First-aid Measures After Inhalation: Remove person to fresh air. If you feel      
unwell, get medical attention.                                                    
First-aid Measures After Skin Contact: Immediately wash with soap and water.      
Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get
medical attention.                                                                
First-aid Measures After Eye Contact: Flush with large amounts of water. Remove   
contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get    
medical attention.                                                                
First-aid Measures After Ingestion: Rinse mouth. If you feel unwell, get medical  
attention.                                                                        


4.2.  Most important symptoms and effects, both acute and delayed
Symptoms/Injuries:                                                                
Symptoms/Injuries After Inhalation:                                               
Symptoms/Injuries After Skin Contact:                                             
Symptoms/Injuries After Eye Contact:                                              
Symptoms/Injuries After Ingestion:                                                
Chronic Symptoms:                                                                 


4.3.  Indication of Any Immediate Medical Attention and Special Treatment
Needed
Not applicable                                                                    

SECTION 5: FIRE-FIGHTING MEASURES                                                 

5.1.  Extinguishing Media
Suitable Extinguishing Media: In case of fire: Use a fire fighting agent suitable 
for ordinary combustible material such as water or foam to extinguish.            
Unsuitable Extinguishing Media:                                                   


5.2.  Special Hazards Arising From the Substance or Mixture
Fire Hazard: None inherent in this product.                                       
Explosion Hazard:  Substance                                            Condition 
Aldehydes                                   During Combustion                     
Carbon monoxide                        During Combustion                          
Carbon dioxide                            During Combustion                       
Ketones                                     During Combustion                     
Reactivity:                                                                       


5.3.  Advice for Firefighters
Precautionary Measures Fire:                                                      
Firefighting Instructions:                                                        
Protection During Firefighting: No special protective actions for fire-fighters   
are anticipated.                                                                  

SECTION 6: ACCIDENTAL RELEASE MEASURES                                            


6.1.  Personal Precautions, Protective Equipment and Emergency Procedures
General Measures: Evacuate area. Ventilate the area with fresh air. For large     
spill, or spills in confined spaces, provide mechanical ventilation to disperse or
exhaust vapors, in accordance with good industrial hygiene practice. Warning! A   
motor could be an ignition source and could cause flammable gases or vapors in the
spill area to burn or explode. Refer to other sections of this SDS for information
regarding physical and health hazards, respiratory protection, ventilation, and   
personal protective equipment.                                                    


6.1.1.      For Non-emergency Personnel
Protective Equipment:                                                             
Emergency Procedures:                                                             


6.1.2.      For Emergency Responders
Protective Equipment:                                                             
Emergency Procedures:                                                             


6.2.  Environmental Precautions
Avoid release to the environment. For larger spills, cover drains and build dikes 
to prevent entry into sewer systems or bodies of water.                           


6.3.  Methods and Material for Containment and Cleaning Up
For Containment:                                                                  
Methods for Cleaning Up: Contain spill. Working from around the edges of the spill
inward, cover with bentonite, vermiculite, or commercially available inorganic    
absorbent material. Mix in sufficient absorbent until it appears dry. Remember,   
adding an absorbent material does not remove a physical, health, or environmental 
hazard. Collect as much of the spilled material as possible. Place in a closed    
container approved for transportation by appropriate authorities. Clean up residue
with an appropriate solvent selected by a qualified and authorized person.        
Ventilate the area with fresh air. Read and follow safety precautions on the      
solvent label and SDS. Seal the container. Dispose of collected material as soon  
as possible. Avoid breathing dust/fume/gas/mist/vapors/spray. Do not get in eyes, 
on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash 
thoroughly after handling. Contaminated work clothing should not be allowed out of
the workplace. Avoid release to the environment. Wash contaminated clothing before
reuse. Avoid contact with oxidizing agents (eg. chlorine, chromic acid etc.)      


6.4.  Reference to Other Sections
See heading  8, Exposure Controls and Personal Protection.                        


SECTION 7: HANDLING AND STORAGE                                                   


7.1.  Precautions for Safe Handling
Additional Hazards When Processed:  Avoid breathing                               
dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do  
not eat, drink or smoke when using this product. Wash thoroughly after handling.  
Contaminated work clothing should not be allowed out of the workplace. Avoid      
release to the environment. Wash contaminated clothing before reuse. Avoid contact
with oxidizing agents (eg. chlorine, chromic acid etc.).                          
Hygiene Measures:                                                                 


7.2.  Conditions for Safe Storage, Including Any Incompatibilities
Technical Measures:                                                               
Storage Conditions: Store away from acids. Store away from oxidizing agents.      


7.3.  Specific End Use(s)
                                                                                  

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION                                  


8.1.  Control Parameters
Occupational exposure limits                                                      
If a component is disclosed in section 3 but does not appear in the table below,  
an occupational exposure limit is not available                                   
for the component.                                                                
Ingredient                                                                        
C.A.S. No.                                                                        
Agency                                                                            
Limit type                                                                        
Additional Comments                                                               
                                                                                  
Amorphous Silica                                                                  
67762-90-7                                                                        
CMRG                                                                              
CEIL:5 mg/m3                                                                      
                                                                                  
                                                                                  
SILICA, AMORPHOUS                                                                 
67762-90-7                                                                        
OSHA                                                                              
TWA concentration:0.8                                                             
mg/m3;TWA:20 millions of                                                          
particles/cu. ft.                                                                 
                                                                                  
                                                                                  


8.2.  Exposure Controls
Appropriate Engineering      |Use general dilution ventilation and/or local       
Controls                     |exhaust ventilation to control airborne exposures to
                             |below relevant Exposure Limits and/or control       
                             |dust/fume/gas/mist/vapors/spray. If ventilation is  
                             |not adequate, use respiratory protection equipment. 
Personal Protective Equipment|                                                    
Materials for Protective     |                                                    
Clothing                     |                                                    
Hand Protection              |                                                    
Eye Protection               |Select and use eye/face protection to prevent       
                             |contact based on the results of an exposure         
                             |assessment. The following eye/face protection(s) are
                             |recommended: Indirect Vented Goggles                
Skin and Body Protection     |Select and use gloves and/or protective clothing    
                             |approved to relevant local standards to prevent skin
                             |contact based on the results of an exposure         
                             |assessment. Selection should be based on use factors
                             |such as exposure levels, concentration of the       
                             |substance or mixture, frequency and duration,       
                             |physical challenges such as temperature extremes,   
                             |and other use conditions. Consult with your glove   
                             |and/or protective clothing manufacturer for         
                             |selection of appropriate compatible                 
                             |gloves/protective Clothing. Gloves made from the    
                             |following material(s) are recommended: Butyl Rubber 
Respiratory Protection       |An exposure assessment may be needed to decide if a 
                             |respirator is required. If a respirator is needed,  
                             |use respirators as part of a full respiratory       
                             |protection program. Based on the results of the     
                             |exposure assessment, select from the following      
                             |respirator type(s) to reduce inhalation exposure:   
                             |Half facepiece or full facepiece air-purifying      
                             |respirator suitable for organic vapors and          
                             |particulates For questions about suitability for a  
                             |specific application, consult with your respirator  
                             |manufacturer.                                       
Thermal Hazard Protection    |                                                    

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES                                       


9.1.  Information on Basic Physical and Chemical Properties
Physical State                      |Liquid                                       
Appearance                          |                                             
Odor                                |light straw colored, epoxy odor              
Odor Threshold                      |No Data Available                            
pH                                  |Not Applicable                               
Relative Evaporation Rate           |                                             
(butylacetate=1)                    |                                             
Melting Point                       |No Data Available                            
Freezing Point                      |                                             
Boiling Point                       |Not Applicable                               
Flash Point                         |>=240 �C [Test Method: Estimated]            
Auto-ignition Temperature           |No Data Available                            
Decomposition Temperature           |No Data Available                            
Flammability (solid, gas)           |Not Applicable                               
Vapor Pressure                      |<=0.03 mmHg [@ 25 �C]                        
Relative Vapor Density at 20 �C     |                                             
Relative Density                    |                                             
Specific Gravity                    |1.18 [Ref Std: WATER=1]                      
Solubility                          |No Data Available non-water                  
Partition coefficient:              |No Data Available                            
n-octanol/water                     |                                             
Viscosity                           |90,000 - 150,000 centipoise                  
Lower Flammable Limit               |Not Applicable                               
Upper Flammable Limit               |Not Applicable                               


9.2.  Other Information
VOC Less H2O & Exempt Solvents: 0 g/l [Test Method: calculated SCAQMD rule 443.1] 
[Details:                                                                         
when used as intended with Part A]                                                
VOC Less H2O & Exempt Solvents: 0 g/l [Test Method: calculated SCAQMD rule 443.1] 
[Details: as                                                                      
supplied]                                                                         
VOC Less H2O & Exempt Solvents: 0 % [Test Method: calculated per CARB title 2]    
[Details: when                                                                    
used as intended with Part A]                                                     

SECTION 10: STABILITY AND REACTIVITY                                              


10.1      Reactivity
This material may be reactive with certain agents under certain conditions - see  
the remaining headings in this section.                                           


10.2      Chemical Stability
Stable.                                                                           


10.3      Possibility of Hazardous Reactions
Hazardous polymerization will not occur.                                          


10.4      Conditions to Avoid
Heat is generated during cure. Do not cure a mass larger than 50 grams in a       
confined space to prevent a premature exothermic                                  
reaction with production of intense heat and smoke.                               


10.5      Incompatible Materials
Strong acids Strong oxidizing agents                                              


10.6      Hazardous Decomposition Products
Substance               Condition                                                 
None known.                                                                       

SECTION 11: TOXICOLOGICAL INFORMATION                                             


11.1. Information on Toxicological Effects
Acute Toxicity:                                                                   
Skin Corrosion/Irritation:                                                        
Serious Eye Damage/Irritation:                                                    
Respiratory or Skin Sensitization:                                                
Germ Cell Mutagenicity:                                                           
Carcinogenicity:                                                                  
Reproductive Toxicity:                                                            
Specific Target Organ Toxicity (Single Exposure):                                 
Specific Target Organ Toxicity (Repeated Exposure):                               
Aspiration Hazard: For the component/components, either no data are currently     
available or the data are not sufficient for classification.                      
Symptoms/Injuries After Inhalation:  No health effects are expected.              
Symptoms/Injuries After Skin Contact:  Mild Skin Irritation: Signs/symptoms may   
include localized redness, swelling, itching, and dryness. Allergic Skin Reaction 
(non-photo induced): Signs/symptoms may include redness, swelling, blistering, and
itching.                                                                          
Symptoms/Injuries After Eye Contact:  Moderate Eye Irritation: Signs/symptoms may 
include redness, swelling, pain, tearing, and blurred or hazy vision.             
Symptoms/Injuries After Ingestion:  Gastrointestinal Irritation: Signs/symptoms   
may include abdominal pain, stomach upset, nausea, vomiting and diarrhea.         
Chronic Symptoms:                                                                 

SECTION 12: ECOLOGICAL INFORMATION                                                


12.1. Toxicity
Please contact the address or phone number listed on the first page of the SDS for
additional ecotoxicological information on this material and/or its components.   


12.2. Persistence and Degradability
                                                                                  


12.3. Bioaccumulative Potential
                                                                                  


12.4. Mobility in Soil
                                                                                  


12.5. Other Adverse Effects
                                                                                  

SECTION 13: DISPOSAL CONSIDERATIONS
13.1. Waste treatment methods
Waste Disposal Recommendations: Dispose of contents/ container in accordance with 
the local/regional/national/international regulations. Dispose of completely cured
(or polymerized) material in a permitted industrial waste facility. As a disposal 
alternative, incinerate uncured product in a permitted waste incineration         
facility. Proper destruction may require the use of additional fuel during        
incineration processes. Combustion products will include halogen acid             
(HCl/HF/HBr). Facility must be capable of handling halogenated materials. Empty   
drums/barrels/containers used for transporting and handling hazardous chemicals   
(chemical substances/mixtures/preparations classified as Hazardous as per         
applicable regulations) shall be considered, stored, treated & disposed of as     
hazardous wastes unless otherwise defined by applicable waste regulations. Consult
with the respective regulating authorities to determine the available treatment   
and disposal facilities.                                                          
Additional Information:                                                           

SECTION 14: TRANSPORT INFORMATION                                                 


14.1 In Accordance with DOT
Proper Shipping Name |                                                            
Hazard Class         |                       |<PICTOGRAM PHRASE>                  
Identification Number|                       |                                    
Label Codes          |                       |                                    
ERG Number           |                                                            


14.2 In Accordance with IMDG
Proper Shipping Name |                                                            
Hazard Class         |                                                            
Identification Number|                                                            
Label Codes          |                      |<PICTOGRAM PHRASE>                   
ntification Of The   |                      |                                     
Substance/m          |                      |                                     
EmS-No. (Fire)       |                      |                                     
EmS-No. (Spillage)   |                      |                                     


14.3 In Accordance with IATA
Proper Shipping Name |                                                            
Identification Number|                       |<PICTOGRAM PHRASE>                   
Hazard Class         |                       |                                     
Label Codes          |                       |                                     
ntification Of The   |                       |                                     
Substance/m          |                       |                                     
ERG Code (IATA)      |                                                            

SECTION 15: REGULATORY INFORMATION                                                

15.1      US Federal Regulations
<COMPONENT> Contact 3M for more information.                                      
SARA Section 311/312 Hazard Classes |Fire Hazard - No Pressure Hazard - No        
                                    |Reactivity Hazard - No Immediate Hazard - Yes
                                    |Delayed Hazard - No                          
Toxic Substances Control Act (TSCA) |                                             

15.2      US State Regulations
<COMPONENT>                                                                       
Contact 3M for more information.                                                  

SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION     

Revision date   |04/16/15                                                         
Other           |DISCLAIMER: The information in this Safety Data Sheet (SDS) is   
Information     |believed to be correct as of the date issued. 3M MAKES NO        
                |WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, 
                |ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A         
                |PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE.   
                |User is responsible for determining whether the 3M product is fit
                |for a particular purpose and suitable for user's method of use or
                |application. Given the variety of factors that can affect the use
                |and application of a 3M product, some of which are uniquely      
                |within the user's knowledge and control, it is essential that the
                |user evaluate the 3M product to determine whether it is fit for a
                |particular purpose and suitable for user's method of use or      
                |application. 3M provides information in electronic form as a     
                |service to its customers. Due to the remote possibility that     
                |electronic transfer may have resulted in errors, omissions or    
                |alterations in this information, 3M makes no representations as  
                |to its completeness or accuracy. In addition, information        
                |obtained from a database may not be as current as the information
                |in the SDS available directly from 3M                            
GHS Full Text Phrases:                                                            
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             


Grainger disclaimer.








































Safety Data Sheet                                                                 
Date of Issue: 04/16/15    |Revision Date:             |Revision Number: 22.00    
Imperial Supplies Part Number: 0077660                                            


SECTION 1: IDENTIFICATION                                                         


1.1.  Product Identifier
Product Form:                                                                     
Product Name: 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP100NS Translucent, Part A   
CAS No:                                                                           
Synonyms:                                                                         


1.2.  Intended Use of the Product
Use of the substance/mixture: Accelerator for 2-part epoxy adhesive, Structural   
adhesive                                                                          


1.3.  Name, Address, and Telephone of the Responsible Party
Company :                                                                         
3M                                                                                
Industrial Adhesives and Tapes Division                                           
3M Center, St. Paul, MN 55144-1000, USA                                           
Phone: 1-888-3M HELPS (1-888-364-3577)                                            


1.4.  Emergency Telephone Number
Emergency     | 1-800-364-3577 or (651) 737-6501 (24 hours)                       
number        |                                                                   

SECTION 2: HAZARDS IDENTIFICATION                                                 


2.1.  Classification of the Substance or Mixture
Classification (GHS-US)
Serious Eye   |Category 2A.  
Damage/Irritat|              
ion           |              
Skin          |Category 2.   
Corrosion/Irri|              
tation        |              
Skin          |Category 1.   
Sensitizer    |              


2.2.  Label Elements
GHS-US Labeling
Hazard Pictograms (GHS-US)   |[pic]   |        |        |        |        |        
Signal Word (GHS-US)         |Warning                                             
Hazard Statements (GHS-US)   |Causes serious eye irritation.                      
                             |Causes skin irritation.                             
                             |May cause an allergic skin reaction.                
Precautionary Statements     |Prevention:                                         
(GHS-US)                     |Avoid breathing dust/fume/gas/mist/vapors/spray.    
                             |Wear protective gloves and eye/face protection. Wash
                             |thoroughly after handling. Contaminated work        
                             |clothing must not be allowed out of the workplace.  
                             |Response:                                           
                             |IF IN EYES: Rinse cautiously with water for several 
                             |minutes. Remove contact lenses, if present and easy 
                             |to do. Continue rinsing. If eye irritation persists:
                             |Get medical advice/attention. IF ON SKIN: Wash with 
                             |plenty of soap and water. If skin irritation or rash
                             |occurs: Get medical advice/attention. Take off      
                             |contaminated clothing and wash it before reuse.     
                             |Disposal:                                           
                             |Dispose of contents/container in accordance with    
                             |applicable local/regional/national/international    
                             |regulations.                                        


2.3.  Other Hazards
Other Hazards Not Contributing to the Classification: None.                       


2.4.  Unknown Acute Toxicity (GHS-US)
2% of the mixture consists of ingredients of unknown acute oral toxicity. 3% of   
the mixture consists of ingredients of unknown acute dermal toxicity.             

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS                                 


3.1.  Substance
Name                            |Product identifier   |%       |Classification    
                                |                     |        |(GHS-US)          
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  


Full text of H-phrases: See Section 16
3.2.  Mixture
Name                            |Product identifier   |%       |Classification    
                                |                     |        |(GHS-US)          
Mercaptan Polymer (NJTS Reg. No.|Trade Secret*        |60 - 80 |                  
04499600-6776)                  |                     |Trade   |                  
                                |                     |Secret *|                  
Hydrogenated Terphenyl          |61788-32-7           |5 - 20  |                  
                                |                     |Trade   |                  
                                |                     |Secret *|                  
2,4,6-Tris((dimethylamino)methyl|90-72-2              |5 - 15  |                  
)phenol                         |                     |Trade   |                  
                                |                     |Secret *|                  
Amorphous Silica                |67762-90-7           |1 - 5   |                  
                                |                     |Trade   |                  
                                |                     |Secret *|                  
bis[(Dimethylamino)methyl]Phenol|71074-89-0           |< 3     |                  
                                |                     |Trade   |                  
                                |                     |Secret *|                  
Polyphenyls, partially          |68956-74-1           |< 3     |                  
hydrogenated                    |                     |Trade   |                  
                                |                     |Secret *|                  
Organosilane                    |4420-74-0            |< 0.5   |                  
                                |                     |Trade   |                  
                                |                     |Secret *|                  


SECTION 4: FIRST AID MEASURES                                                     


4.1.  Description of First Aid Measures
First-aid Measures General:                                                       
First-aid Measures After Inhalation: Remove person to fresh air. If you feel      
unwell, get medical attention.                                                    
First-aid Measures After Skin Contact: Immediately wash with soap and water.      
Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get
medical attention.                                                                
First-aid Measures After Eye Contact: Immediately flush with large amounts of     
water. Remove contact lenses if easy to do. Continue rinsing. Get medical         
attention.                                                                        
First-aid Measures After Ingestion: Rinse mouth. If you feel unwell, get medical  
attention.                                                                        


4.2.  Most important symptoms and effects, both acute and delayed
Symptoms/Injuries:                                                                
Symptoms/Injuries After Inhalation:                                               
Symptoms/Injuries After Skin Contact:                                             
Symptoms/Injuries After Eye Contact:                                              
Symptoms/Injuries After Ingestion:                                                
Chronic Symptoms:                                                                 


4.3.  Indication of Any Immediate Medical Attention and Special Treatment
Needed
Not applicable                                                                    

SECTION 5: FIRE-FIGHTING MEASURES                                                 

5.1.  Extinguishing Media
Suitable Extinguishing Media: In case of fire: Use a fire fighting agent suitable 
for ordinary combustible material such as water or foam to extinguish.            
Unsuitable Extinguishing Media:                                                   


5.2.  Special Hazards Arising From the Substance or Mixture
Fire Hazard: None inherent in this product.                                       
Explosion Hazard: Substance                                                       
Condition                                                                         
Carbon monoxide                                   During Combustion               
Carbon dioxide                                        During Combustion           
Hydrogen Sulfide                                     During Combustion            
Oxides of Nitrogen                                  During Combustion             
Oxides of Sulfur                                        During Combustion         
Reactivity:                                                                       


5.3.  Advice for Firefighters
Precautionary Measures Fire:                                                      
Firefighting Instructions:                                                        
Protection During Firefighting: No special protective actions for fire-fighters   
are anticipated.                                                                  

SECTION 6: ACCIDENTAL RELEASE MEASURES                                            


6.1.  Personal Precautions, Protective Equipment and Emergency Procedures
General Measures: Evacuate area. Ventilate the area with fresh air. For large     
spill, or spills in confined spaces, provide mechanical ventilation to disperse or
exhaust vapors, in accordance with good industrial hygiene practice. Warning! A   
motor could be an ignition source and could cause flammable gases or vapors in the
spill area to burn or explode. Refer to other sections of this SDS for information
regarding physical and health hazards, respiratory protection, ventilation, and   
personal protective equipment.                                                    


6.1.1.      For Non-emergency Personnel
Protective Equipment:                                                             
Emergency Procedures:                                                             


6.1.2.      For Emergency Responders
Protective Equipment:                                                             
Emergency Procedures:                                                             


6.2.  Environmental Precautions
Avoid release to the environment. For larger spills, cover drains and build dikes 
to prevent entry into sewer systems or bodies of water.                           


6.3.  Methods and Material for Containment and Cleaning Up
For Containment:                                                                  
Methods for Cleaning Up: Contain spill. Working from around the edges of the spill
inward, cover with bentonite, vermiculite, or commercially available inorganic    
absorbent material. Mix in sufficient absorbent until it appears dry. Remember,   
adding an absorbent material does not remove a physical, health, or environmental 
hazard. Collect as much of the spilled material as possible. Place in a closed    
container approved for transportation by appropriate authorities. Clean up residue
with an appropriate solvent selected by a qualified and authorized person.        
Ventilate the area with fresh air. Read and follow safety precautions on the      
solvent label and SDS. Seal the container. Dispose of collected material as soon  
as possible.                                                                      


6.4.  Reference to Other Sections
See heading  8, Exposure Controls and Personal Protection.                        


SECTION 7: HANDLING AND STORAGE                                                   


7.1.  Precautions for Safe Handling
Additional Hazards When Processed: Avoid breathing                                
dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do  
not eat, drink or smoke when using this product. Wash thoroughly after handling.  
Contaminated work clothing should not be allowed out of the workplace. Wash       
contaminated clothing before reuse. Avoid contact with oxidizing agents (eg.      
chlorine, chromic acid etc.)                                                      
Hygiene Measures:                                                                 


7.2.  Conditions for Safe Storage, Including Any Incompatibilities
Technical Measures:                                                               
Storage Conditions: Store away from acids. Store away from oxidizing agents.      


7.3.  Specific End Use(s)
                                                                                  

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION                                  


8.1.  Control Parameters
Occupational exposure limits                                                      
If a component is disclosed in section 3 but does not appear in the table below,  
an occupational exposure limit is not available                                   
for the component.                                                                
Ingredient                                                                        
C.A.S. No.                                                                        
Agency                                                                            
Limit type                                                                        
Additional Comments                                                               
                                                                                  
Hydrogenated Terphenyl                                                            
61788-32-7                                                                        
ACGIH                                                                             
TWA:0.5 ppm                                                                       
                                                                                  
                                                                                  
Amorphous Silica                                                                  
67762-90-7                                                                        
CMRG                                                                              
CEIL:5 mg/m3                                                                      
                                                                                  
                                                                                  
SILICA, AMORPHOUS                                                                 
67762-90-7                                                                        
OSHA                                                                              
TWA concentration:0.8                                                             
mg/m3;TWA:20 millions of                                                          
particles/cu. ft.                                                                 
                                                                                  
                                                                                  
2,4,6-                                                                            
Tris((dimethylamino)methyl)phe                                                    
nol                                                                               
90-72-2                                                                           
CMRG                                                                              
TWA:5 ppm                                                                         
                                                                                  
                                                                                  


8.2.  Exposure Controls
Appropriate Engineering      |Use general dilution ventilation and/or local       
Controls                     |exhaust ventilation to control airborne exposures to
                             |below relevant Exposure Limits and/or control       
                             |dust/fume/gas/mist/vapors/spray. If ventilation is  
                             |not adequate, use respiratory protection equipment. 
Personal Protective Equipment|                                                    
Materials for Protective     |                                                    
Clothing                     |                                                    
Hand Protection              |                                                    
Eye Protection               |Select and use eye/face protection to prevent       
                             |contact based on the results of an exposure         
                             |assessment. The following eye/face protection(s) are
                             |recommended: Indirect Vented Goggles                
Skin and Body Protection     |Select and use gloves and/or protective clothing    
                             |approved to relevant local standards to prevent skin
                             |contact based on the results of an exposure         
                             |assessment. Selection should be based on use factors
                             |such as exposure levels, concentration of the       
                             |substance or mixture, frequency and duration,       
                             |physical challenges such as temperature extremes,   
                             |and other use conditions Consult with your glove    
                             |and/or protective clothing manufacturer for selectio
                             |or appropriate compatible gloves/protective         
                             |Clothing. Gloves made from the following material(s)
                             |are recommended: Butyl Rubber Neoprene Nitrile      
                             |Rubber                                              
Respiratory Protection       |An exposure assessment may be needed to decide if a 
                             |respirator is required. If a respirator is needed,  
                             |use respirators as part of a full respiratory       
                             |protection program. Based on the results of the     
                             |exposure assessment, select from the following      
                             |respirator type(s) to reduce inhalation exposure:   
                             |Half facepiece or full facepiece air-purifying      
                             |respirator suitable for organic vapors and          
                             |particulates For questions about suitability for a  
                             |specific application, consult with you respirator   
                             |manufacturer.                                       
Thermal Hazard Protection    |                                                    

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES                                       


9.1.  Information on Basic Physical and Chemical Properties
Physical State                      |Liquid                                       
Appearance                          |                                             
Odor                                |Light amber, strong mercaptan odor           
Odor Threshold                      |No Data Available                            
pH                                  |Not Applicable                               
Relative Evaporation Rate           |                                             
(butylacetate=1)                    |                                             
Melting Point                       |Not Applicable                               
Freezing Point                      |                                             
Boiling Point                       |Not Applicable                               
Flash Point                         |>=149 �C [Test Method: Estimated]            
Auto-ignition Temperature           |No Data Available                            
Decomposition Temperature           |No Data Available                            
Flammability (solid, gas)           |Not Applicable                               
Vapor Pressure                      |<=0.02 mmHg [@ 20 �C]                        
Relative Vapor Density at 20 �C     |                                             
Relative Density                    |                                             
Specific Gravity                    |1.15 [Ref Std: WATER=1]                      
Solubility                          |Negligible Water                             
Partition coefficient:              |No Data Available                            
n-octanol/water                     |                                             
Viscosity                           |50,000 - 85,000 centipoise                   
Lower Flammable Limit               |Not Applicable                               
Upper Flammable Limit               |Not Applicable                               


9.2.  Other Information
VOC Less H2O & Exempt Solvents: 0 g/l [Test Method: calculated SCAQMD rule 443.1] 
[Details:                                                                         
when used as intended with Part B]                                                
VOC Less H2O & Exempt Solvents: 5 g/l [Test Method: calculated SCAQMD rule 443.1] 
[Details: as                                                                      
supplied]                                                                         
VOC Less H2O & Exempt Solvents: 0 % [Test Method: calculated per CARB title 2]    
[Details: when                                                                    
used as intended with Part B]                                                     

SECTION 10: STABILITY AND REACTIVITY                                              


10.1      Reactivity
This material may be reactive with certain agents under certain conditions - see  
the remaining headings in this section.                                           


10.2      Chemical Stability
Stable.                                                                           


10.3      Possibility of Hazardous Reactions
Hazardous polymerization will not occur.                                          


10.4      Conditions to Avoid
Heat is generated during cure. Do not cure a mass larger than 50 grams in a       
confined space to prevent a premature exothermic                                  
reaction with production of intense heat and smoke.                               


10.5      Incompatible Materials
Strong oxidizing agents Strong acids                                              


10.6      Hazardous Decomposition Products
Substance          Condition                                                      
None known                                                                        

SECTION 11: TOXICOLOGICAL INFORMATION                                             


11.1. Information on Toxicological Effects
Acute Toxicity:                                                                   
Skin Corrosion/Irritation:                                                        
Serious Eye Damage/Irritation:                                                    
Respiratory or Skin Sensitization: For the component/components, either no data   
are currently available or the data are not sufficient for classification.        
Germ Cell Mutagenicity:                                                           
Carcinogenicity:                                                                  
Reproductive Toxicity:                                                            
Specific Target Organ Toxicity (Single Exposure):                                 
Specific Target Organ Toxicity (Repeated Exposure):                               
Aspiration Hazard: For the component/components, either no data are currently     
available or the data are not sufficient for classification.                      
Symptoms/Injuries After Inhalation:                                               
Symptoms/Injuries After Skin Contact:                                             
Symptoms/Injuries After Eye Contact:                                              
Symptoms/Injuries After Ingestion:                                                
Chronic Symptoms:                                                                 

SECTION 12: ECOLOGICAL INFORMATION                                                


12.1. Toxicity
Please contact the address or phone number listed on the first page of the SDS for
additional ecotoxicological information on this material and/or its components.   


12.2. Persistence and Degradability
                                                                                  


12.3. Bioaccumulative Potential
                                                                                  


12.4. Mobility in Soil
                                                                                  


12.5. Other Adverse Effects
                                                                                  

SECTION 13: DISPOSAL CONSIDERATIONS
13.1. Waste treatment methods
Waste Disposal Recommendations: Dispose of contents/ container in accordance with 
the local/regional/national/international regulations. Dispose of completely cured
(or polymerized) material in a permitted industrial waste facility. As a disposal 
alternative, incinerate uncured product in a permitted waste incineration         
facility. Proper destruction may require the use of additional fuel during        
incineration processes. If no other disposal options are available, waste product 
that has been completely cured or polymerized may be placed in a landfill properly
designed for industrial waste. Empty drums/barrels/containers used for            
transporting and handling hazardous chemicals (chemical                           
substances/mixtures/preparations classified as Hazardous as per applicable        
regulations) shall be considered, stored, treated & disposed of as hazardous      
wastes unless otherwise defined by applicable waste regulations. Consult with the 
respective regulating authorities to determine the available treatment and        
disposal facilities.                                                              
Additional Information:                                                           

SECTION 14: TRANSPORT INFORMATION                                                 


14.1 In Accordance with DOT
Proper Shipping Name |                                                            
Hazard Class         |                       |<PICTOGRAM PHRASE>                  
Identification Number|                       |                                    
Label Codes          |                       |                                    
ERG Number           |                                                            


14.2 In Accordance with IMDG
Proper Shipping Name |                                                            
Hazard Class         |                                                            
Identification Number|                                                            
Label Codes          |                      |<PICTOGRAM PHRASE>                   
ntification Of The   |                      |                                     
Substance/m          |                      |                                     
EmS-No. (Fire)       |                      |                                     
EmS-No. (Spillage)   |                      |                                     


14.3 In Accordance with IATA
Proper Shipping Name |                                                            
Identification Number|                       |<PICTOGRAM PHRASE>                   
Hazard Class         |                       |                                     
Label Codes          |                       |                                     
ntification Of The   |                       |                                     
Substance/m          |                       |                                     
ERG Code (IATA)      |                                                            

SECTION 15: REGULATORY INFORMATION                                                

15.1      US Federal Regulations
<COMPONENT> Contact 3M for more information.                                      
SARA Section 311/312 Hazard Classes |Fire Hazard - No Pressure Hazard - No        
                                    |Reactivity Hazard - No Immediate Hazard - Yes
                                    |Delayed Hazard - No                          
Toxic Substances Control Act (TSCA) |                                             

15.2      US State Regulations
<COMPONENT>                                                                       
Contact 3M for more information.                                                  

SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION     

Revision date   |                                                                 
Other           |This document has been prepared in accordance with the SDS       
Information     |requirements of the OSHA Hazard Communication Standard 29 CFR    
                |1910.1200.                                                       
GHS Full Text Phrases:                                                            
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             


Grainger disclaimer.















    

The information contained in this was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this '' shall be created or inferred by any statement in this ''. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this ''. The user is responsible for full compliance.

Feedback