Register Now    |    Login

National Distributor of Quality Maintenance Supplies Since 1958


Track Order Status

Sheet 0075730

Printer Friendly View
Safety Data Sheet                                                                 
Date of Issue:             |Revision Date: 3/19/2015   |Revision Number:          
Imperial Supplies Part Number: 0075730                                            

SECTION 1: IDENTIFICATION                                                         

1.1.  Product Identifier
Product Form:                                                                     
Product Name: Dynatex� 49202 Red Hi-Temp RTV Silicone Gasket Maker - L/V          
CAS No:                                                                           
Synonyms: N/A                                                                     

1.2.  Intended Use of the Product
Use of the substance/mixture: Refer to Technical Data.                            

1.3.  Name, Address, and Telephone of the Responsible Party
Dynatex Inc.                                                                      
350 Ring Road                                                                     
Elizabethtown, KY,  42701                                                         
Phone:  (270) 769-3385                                                            

1.4.  Emergency Telephone Number
Emergency     |(800) 424-9300 Chemtrec                                            
number        |                                                                   

SECTION 2: HAZARDS IDENTIFICATION                                                 

2.1.  Classification of the Substance or Mixture
Classification (GHS-US)
N/A           |              

2.2.  Label Elements
GHS-US Labeling
Hazard Pictograms (GHS-US)   |        |        |        |        |        |        
Signal Word (GHS-US)         |                                                    
Hazard Statements (GHS-US)   |N/A.                                                
Precautionary Statements     |Response: N/A.                                      
(GHS-US)                     |Prevention: Use only outdoors or in a               
                             |well-ventilated area.                               
                             |Storage: N/A.                                       
                             |Disposal: N/A.                                      

2.3.  Other Hazards
Other Hazards Not Contributing to the Classification: Not a hazardous substance or

2.4.  Unknown Acute Toxicity (GHS-US)


3.1.  Substance
Name                            |Product identifier   |%       |Classification    
                                |                     |        |(GHS-US)          
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  

Full text of H-phrases: See Section 16
3.2.  Mixture
Name                            |Product identifier   |%       |Classification    
                                |                     |        |(GHS-US)          
Ethyltriacetoxysilane           |17689-77-9           |1% - 5% |                  
Methyltriacetoxysilane          |4253-34-3            |1% - 5% |                  
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  

SECTION 4: FIRST AID MEASURES                                                     

4.1.  Description of First Aid Measures
First-aid Measures General:                                                       
First-aid Measures After Inhalation: Material is not likely to present an         
inhalation hazard at ambient conditions. If material is heated or vapor are       
generated, care should be taken to prevent inhalation. In case of exposure to     
vapor, move to fresh air.                                                         
First-aid Measures After Skin Contact: Remove from skin and wash throughly with   
soap and water or waterless cleanser. Get medical attention if irritation or other
ill effects develop or persist.                                                   
First-aid Measures After Eye Contact: Immediately flush with water for 15 minutes.
Seek medical attention.                                                           
First-aid Measures After Ingestion: DO NOT INDUCE VOMITING. Seek immediate medical

4.2.  Most important symptoms and effects, both acute and delayed
Symptoms/Injuries After Inhalation:                                               
Symptoms/Injuries After Skin Contact:                                             
Symptoms/Injuries After Eye Contact:                                              
Symptoms/Injuries After Ingestion:                                                
Chronic Symptoms:                                                                 

4.3.  Indication of Any Immediate Medical Attention and Special Treatment
Comments: Treat according to person's condition and specifics of exposure.        

SECTION 5: FIRE-FIGHTING MEASURES                                                 

5.1.  Extinguishing Media
Suitable Extinguishing Media: On large fires use dry chemical, foam, or water     
spray. On small fires use carbon dioxide, dry chemical or water spray. Water can  
be used to cool fire exposed containers.                                          
Unsuitable Extinguishing Media: N/A                                               

5.2.  Special Hazards Arising From the Substance or Mixture
Fire Hazard: None known.                                                          
Explosion Hazard: None known.                                                     
Comment: When temperatures above 150�C in the presence of air, product can form   
formaldehyde vapors. Formaldehyde is a potential cancer hazard, a known skin and  
respiratory sensitizer, and an irritant to the eyes, nose, throat, skin and       
digestive system. Safe handling conditions may be maintained by keeping vapor     
concentrations within the OSHA Permissible Exposure Limits for formaldehyde.      

5.3.  Advice for Firefighters
Precautionary Measures Fire:                                                      
Firefighting Instructions: Self-contained breathing apparatus and protective      
clothing should be worn when fighting large fires                                 
involving chemicals. Determine the need to evacuate or isolate the area according 
to your local emergency plan. Use water spray to keep fire exposed containers     
Protection During Firefighting:                                                   

SECTION 6: ACCIDENTAL RELEASE MEASURES                                            

6.1.  Personal Precautions, Protective Equipment and Emergency Procedures
General Measures:                                                                 

6.1.1.      For Non-emergency Personnel
Protective Equipment:                                                             
Emergency Procedures:                                                             

6.1.2.      For Emergency Responders
Protective Equipment:                                                             
Emergency Procedures:                                                             

6.2.  Environmental Precautions

6.3.  Methods and Material for Containment and Cleaning Up
For Containment:                                                                  
Methods for Cleaning Up: Observe all personal protection equipment                
recommendations. Wipe up or scrape up and contain for salvage or disposal. Clean  
area as appropriate since spilled materials, even in small quantities, may present
a slip hazard. Final cleaning may require steam, solvents or detergents. Dispose  
of saturated absorbant or cleaning materials appropriately, since spontaneous     
heating may occur. Local, state and federal laws and regulations may apply to     
releases and disposal of this material, as well as those materials and items      
employed in the cleanup of releases. You will need to determine which federal,    
state and local laws and regulations are applicable. Sections 13 and 15 of this   
MSDS provide information regarding certain federal and state requirements.        

6.4.  Reference to Other Sections
See heading  8, Exposure Controls and Personal Protection.                        

SECTION 7: HANDLING AND STORAGE                                                   

7.1.  Precautions for Safe Handling
Additional Hazards When Processed: Use with adequate ventilation. Product evolves 
acetic acid with exposed to water or humid air. Provide ventilation during use to 
control acetic acid with exposure guidelines or use respiratory protection. Avoid 
eye contact. Avoid skin contact. Do not take internally. Avoid breathing vapor.   
Keep container closed.                                                            
Hygiene Measures:                                                                 

7.2.  Conditions for Safe Storage, Including Any Incompatibilities
Technical Measures:                                                               
Storage Conditions: Use reasonable care and store away from oxidizing materials.  
Keep container closed and store away from water or moisture. This material in its 
finely divided form presents an explosion hazard. Follow NFPA 654 (for chemical   
dusts) or 484 (for metal dusts) as appropriate for managing dust hazards to       
minimize secondary explosion potential.                                           

7.3.  Specific End Use(s)

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION                                  

8.1.  Control Parameters
Occupational Exposure Limits:                                                     
Ingredient Name                                                                   
ACGIH TLV                                                                         
OSHA PEL                                                                          
TWA 10ppm                                                                         
TWA 10ppm                                                                         
TWA 10ppm                                                                         
TWA 10ppm                                                                         
Component Exposure Limits: Component Name: Ethyltriacetoxysilane CAS Number:      
17689-77-9 Exposure Limits: See acetic acid comments Component Name:              
Methyltriacetoxysilane CAS Number: 4253-34-3 Exposure Limits: See acetic acid     
comments Acetic acid is formed upon contact with water or humid air. Provide      
adequate ventilation to control exposures within guidelines of OSHA PEL: TWA 10   
ppm and ACGIH TLV: TWA 10 ppm, STEL 15 ppm.                                       

8.2.  Exposure Controls
Appropriate Engineering      |Local Ventilation: Recommended General Ventilation: 
Controls                     |Recommended.                                        
                             |Comment: Product evolves acetic acid when exposed to
                             |water or humid air. Provide ventilation during use  
                             |to control acetic acid within exposure guidelines or
                             |use respiratory protection. When heated to          
                             |temperatures above 150C (300F) in the presence of   
                             |air, product can form formaldehyde vapors. Physical 
                             |and health hazard information is readily available  
                             |on the Material Safety Data Sheet.                  
                             |Note: These precautions are for room temperature    
                             |handling. Use at elevated temperatures or           
                             |aerosol/spray applications may require added        
Personal Protective Equipment|Goggles, Gloves.                                    
                             |Precautionary Measures: Avoid eye contact. Avoid    
                             |skin contact. Avoid breathing vapor. Keep container 
                             |closed. Do not take internally. Use reasonable care.
Materials for Protective     |                                                    
Clothing                     |                                                    
Hand Protection              |                                                    
Eye Protection               |Safety goggles or glasses with side shields are     
Skin and Body Protection     |Wash at mealtimes and end of shift. Contaminated    
                             |clothing and shoes should be removed as soon as     
                             |practical and throughly cleaned before reuse.       
                             |Chemical protective gloves are recommended. Suitable
                             |Gloves: Handle in accordance with good industrial   
                             |hygiene and safety practices.                       
Respiratory Protection       |Use respiratory protection unless adequate exhaust  
                             |ventilation is provided or exposure assessment      
                             |demonstrates that exposures are within exposure     
                             |guidelines. Industrial Hygiene Personnel can assist 
                             |in judging the adequacy of existing engineering     
                             |Suitable Respirator: Respiratory protection is not  
                             |needed under ambient conditions. If vapor is        
                             |generated when material is heated or handled, the   
                             |following is advised. General and local exhaust     
                             |ventilation is recommended to maintain vapor        
                             |exposures below recommended limits. Where           
                             |concentrations are above recommended limits or are  
                             |unknown, appropriate respiratory protection should  
                             |be worn. Follow OSHA respirator regulations (29 CFR 
                             |1910.134) and use NIOSH/MSHA approved respirators.  

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES                                       

9.1.  Information on Basic Physical and Chemical Properties
Physical State                      |Paste                                        
Appearance                          |                                             
Odor                                |Acetic Acid Odor                             
Odor Threshold                      |N/A                                          
pH                                  |Not Determined                               
Relative Evaporation Rate           |Not Determined                               
(butylacetate=1)                    |                                             
Melting Point                       |Not Determined                               
Freezing Point                      |                                             
Boiling Point                       |Not Determined                               
Flash Point                         |>212F Closed Cup                             
                                    |>100C Closed Cup                             
Auto-ignition Temperature           |N/A                                          
Decomposition Temperature           |N/A                                          
Flammability (solid, gas)           |N/A                                          
Vapor Pressure                      |Not Determined                               
Relative Vapor Density at 20 �C     |Not Determined                               
Relative Density                    |                                             
Specific Gravity                    |1.007                                        
Solubility                          |Not Determined                               
Partition coefficient:              |N/A                                          
n-octanol/water                     |                                             
Viscosity                           |Not Determined                               
Lower Flammable Limit               |N/A                                          
Upper Flammable Limit               |N/A                                          

9.2.  Other Information
Note: The above information is not intended for use in preparing product          
specifications. Contact Accumetric LLC before writing specifications.             

SECTION 10: STABILITY AND REACTIVITY                                              

10.1      Reactivity

10.2      Chemical Stability

10.3      Possibility of Hazardous Reactions
Hazardous Polymerization: Will not occur.                                         

10.4      Conditions to Avoid
None known.                                                                       

10.5      Incompatible Materials
Oxidizing material can cause a reaction. Water, moisture or humid air can cause   
hazardous vapors to form as described in Section 8.                               

10.6      Hazardous Decomposition Products
Thermal breakdown of this product during fire or very high heat conditions may    
evolve the following hazardous decomposition products: Carbon oxides and traces of
incompletely burned carbon compounds. Formaldehyde Silicon dioxide Metal oxides.  

SECTION 11: TOXICOLOGICAL INFORMATION                                             

11.1. Information on Toxicological Effects
Acute Toxicity:                                                                   
Component Toxicology Information: No known applicable information.                
Special Hazard Information on Components: No known applicable information.        
Skin Corrosion/Irritation:                                                        
Serious Eye Damage/Irritation:                                                    
Respiratory or Skin Sensitization:                                                
Germ Cell Mutagenicity:                                                           
Reproductive Toxicity:                                                            
Specific Target Organ Toxicity (Single Exposure):                                 
Specific Target Organ Toxicity (Repeated Exposure):                               
Aspiration Hazard:                                                                
Symptoms/Injuries After Inhalation:                                               
Symptoms/Injuries After Skin Contact:                                             
Symptoms/Injuries After Eye Contact:                                              
Symptoms/Injuries After Ingestion:                                                
Chronic Symptoms:                                                                 

SECTION 12: ECOLOGICAL INFORMATION                                                

12.1. Toxicity

12.2. Persistence and Degradability

12.3. Bioaccumulative Potential

12.4. Mobility in Soil

12.5. Other Adverse Effects
Environmental Effects: Complete information is not yet available.                 
Environmental Fate and Distribution: Complete information is not yet available.   
Fate and Effects in Waste Water Treatment Plants: Complete information is not yet 

13.1. Waste treatment methods
Waste Disposal Recommendations: We make no guarantee or warranty of any kind that 
the use or disposal of this product complies with all local, state, or federal    
laws. It is also the obligation of each user of the product mentioned herein to   
determine and comply with the requirements of all applicable statutes. This       
product is not known to be regulated under RCRA regulations. Disposal of unused   
portions of this product and process waste containing this product should be done 
only after a careful evaluation and in compliance with all federal, local and     
state laws.                                                                       
Additional Information:                                                           

SECTION 14: TRANSPORT INFORMATION                                                 

14.1 In Accordance with DOT
Proper Shipping Name |N/A                                                         
Hazard Class         |N/A                    |<PICTOGRAM PHRASE>                  
Identification Number|N/A                    |                                    
Label Codes          |                       |                                    
ERG Number           |                                                            

14.2 In Accordance with IMDG
Proper Shipping Name |Not subject to IMDG code.                                   
Hazard Class         |                                                            
Identification Number|                                                            
Label Codes          |                      |<PICTOGRAM PHRASE>                   
ntification Of The   |                      |                                     
Substance/m          |                      |                                     
EmS-No. (Fire)       |                      |                                     
EmS-No. (Spillage)   |                      |                                     

14.3 In Accordance with IATA
Proper Shipping Name |Not subject to IATA regulations.                            
Identification Number|                       |<PICTOGRAM PHRASE>                   
Hazard Class         |                       |                                     
Label Codes          |                       |                                     
ntification Of The   |                       |                                     
Substance/m          |                       |                                     
ERG Code (IATA)      |                                                            

SECTION 15: REGULATORY INFORMATION                                                

15.1      US Federal Regulations
The contents of this MSDS comply with the OSHA Hazard Communication Standard 29   
CFR 1910.1200.                                                                    
SARA Title III Section 302 Extremely Hazardous Substances: None.                  
SARA Titre III Section 304 CERCLA Substances dangereuses: None.                   
SARA Title III Section 313 Toxic Chemicals: None present or none present in       
regulated quantities.                                                             
Note: Chemicals are listed under the 313 Toxic Chemicals section only if they meet
or exceed a reporting threshold.                                                  
SARA Section 311/312 Hazard Classes |Acute: Yes                                   
                                    |Chronic: No                                  
                                    |Fire: No                                     
                                    |Pressure: No                                 
                                    |Reactive: No                                 
Toxic Substances Control Act (TSCA) |All chemical substances found in this product
                                    |comply with the Toxic Substances Control Act 
                                    |inventory reporting requirements.            

15.2      US State Regulations
California Proposition 65: This product contains the following chemical(s) listed 
by the State of California under the Safe Drinking Water and Toxic Enforcement Act
of 1986 (Proposition 65) as being known to cause cancer, birth defects or other   
reproductive harm: None known.                                                    
Massachusetts: Iron oxide (1309-37-1) Silica, amorphous (7631-86-9)               
New Jersey: Dimethyl siloxane, hydroxy-terminated (70131-67-8)                    
Ethyltriacetoxysilane (17689-77-9) Hydrotreated middle petroleum distillates      
(64742-46-7) Iron oxide (1332-37-2) Methyltriacetoxysilane (4253-34-3)            
Polydimethylsiloxane (63148-62-9) Silica, amorphous (7631-86-9)                   
Pennsylvania: Dimethyl siloxane, hydroxy-terminated (70131-67-8) Hydrotreated     
middle petroleum distillates (64742-46-7) Iron oxide (1332-37-2)                  
Polydimethylsiloxane (63148-62-9) Silica, amorphous (7631-86-9)                   


Revision date   |3/19/2015                                                        
Other           |This document has been prepared in accordance with the SDS       
Information     |requirements of the OSHA Hazard Communication Standard 29 CFR    
GHS Full Text Phrases:                                                            
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             

Grainger disclaimer.


The information contained in this was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this '' shall be created or inferred by any statement in this ''. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this ''. The user is responsible for full compliance.