Product Categories See All
Track Order Status
SDS Sheet 0075720Printer Friendly View
Safety Data Sheet Date of Issue: |Revision Date: 11/18/2014 |Revision Number: Imperial Supplies Part Number: 0075720 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Gel Product Name: Super LubeÂ® Corrosion and Connector Gel CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Anti-corrosion gel 1.3. Name, Address, and Telephone of the Responsible Party Company Synco Chemical Corporation 24 DaVinci Drive P.O. Box 405 Bohemia, NY 11716 Phone: 631-567-5300 1.4. Emergency Telephone Number Emergency |United States - 800-424-9300, UK - National Poisons Emergency: +44 number |870 600 6266 (24 hour - health professionals only), Ireland - |National Poisons Information Centre: +353 1 8379964 SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) The product is| not classified| according to | the Globally | Harmonized | System (GHS). | | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |Non-Regu| | | | | |lated | | | | | |Material| | | | | Signal Word (GHS-US) |Non-Regulated Material Hazard Statements (GHS-US) |Non-Regulated Material Precautionary Statements | (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Thermal Stabilizer | |<5% | Polypropylene Glycol | |<1% | Barium Petroleum Sulfonate |61790-48-5 |<0.25% | Mineral Oil |8042-47-5 |<20% | Fumed Silica |68611-44-9 |<10% |STOT SE 3, H335 C11-14 Branched Alykamines |80939-62-4 |<4% |Aquatic Chronic 2, | | |H411; Skin Irrit. | | |2, H315; Eye | | |Irrit. 2A, H319; | | |H401 Antioxidant |41484-35-9 |<2% |Acute Tox. 3, H331 Unamine O |27136-73-8 |<1% |Skin Corr. 1A, | | |H314; Eye Dam. 1, | | |H318; Acute Tox. | | |4, H302 Polyalphaolefin |151006-63-2 |<80% | Polyalphaolefin and mineral oil are considered substances with a community workplace exposure limit. SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: No special measures required. First-aid Measures After Inhalation: Supply fresh air; consult doctor in case of complaints. First-aid Measures After Skin Contact: Wash areas with soap and water. If skin irritation continues, consult a doctor. First-aid Measures After Eye Contact: Rinse opened eye for at least 15 minutes under running water. If symptoms persist, consult a doctor. First-aid Measures After Ingestion: After swallowing: Do not induce vomiting. Seek medical treatment. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: No further relevant information available. 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed No further relevant information available. SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Carbon dioxide, dry chemical, foam. Unsuitable Extinguishing Media: 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Oxides of carbon. Explosion Hazard: Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Protection During Firefighting: As in any fire, wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent), and full protective gear to prevent contact with skin and eyes. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: Not required. 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions Do not allow to enter sewers/ surface or ground water. 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: Absorb with liquid-binding material (ie. sand, diatomite, acid binders, universal binders, sawdust). Dispose of the collected material according to regulations. Reference to other sections: See Section 7 for information on safe handling. See Section 8 for information on personal protection equipment. See Section 13 for disposal information. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Good manufacturing procedures should be followed in handling and storage. Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Requirements to be met by storerooms and receptacles: Store in a cool, dry area. Further information about storage conditions: Store away from oxidizers. 7.3. Specific End Use(s) No further relevant information available. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Components with occupational exposure limits: 151006-63-2 Polyalphaolefin ACGIH TLV OSHA PEL Short-term value: 10 mg/mÂ³ Long-term value: 5 mg/mÂ³ Long-term value: 5 mg/mÂ³ 8042-47-5 Mineral Oil ACGIH TLV OSHA PEL Short-term value: 10 mg/mÂ³ Long-term value: 5 mg/mÂ³ Long-term value: 5 mg/mÂ³ 68611-44-9 Fumed Silica ACGIH OSHA PEL Short-term value: 3 mg/mÂ³ Long-term value: 10 mg/mÂ³ Short-term value: 6 mg/mÂ³ Additional information: The lists that were valid during the creation were used as basis. 8.2. Exposure Controls Appropriate Engineering | Controls | Personal Protective Equipment|General protective and hygienic measures: The usual |precautionary measures for handling chemicals should |be followed. Materials for Protective |Material of gloves: Chemical resistant. Clothing | Hand Protection |Protective gloves. Eye Protection |Safety glasses with side shields. Skin and Body Protection | Respiratory Protection |Breathing equipment: NIOSH/MSHA or EN approved |respiratory protection is recommended for use in |airborne concentrations exceeding exposure limits. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Gel Appearance | Odor |Mild Odor Threshold |Not determined. pH |7 Relative Evaporation Rate |Not determined. (butylacetate=1) | Melting Point |Not determined. Freezing Point | Boiling Point |Not determined. Flash Point |> 220 Â°C (> 428 Â°F) Auto-ignition Temperature |Product is not selfigniting. Decomposition Temperature |Not determined. Flammability (solid, gas) |Not applicable. Vapor Pressure |Not determined. Relative Vapor Density at 20 Â°C |Not determined. Relative Density |Not determined. Specific Gravity | Solubility |Water: Insoluble. Partition coefficient: |Not determined. n-octanol/water | Viscosity |Dynamic: Not determined. |Kinematic: Not determined. Lower Flammable Limit |Not determined. Upper Flammable Limit |Not determined. 9.2. Other Information No further relevant information available. SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity No further relevant information available. 10.2 Chemical Stability Stable under normal conditions. 10.3 Possibility of Hazardous Reactions No dangerous reactions known. 10.4 Conditions to Avoid No further relevant information available. 10.5 Incompatible Materials Strong oxidizing agents. 10.6 Hazardous Decomposition Products No dangerous decomposition products known. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Additional toxicological information: The product is not subject to classification according to internally approved calculation methods for preparations: When used and handled according to specifications, the product does not have any harmful effects according to our experience and the information provided to us. Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: Germ Cell Mutagenicity: Carcinogenicity: IARC (International Agency for Research on Cancer). None of the ingredients are listed. Group 1 - Carcinogenic to humans Group 2A - Probably carcinogenic to humans Group 2B - Possibly carcinogenic to humans Group 3 - Not classifiable as to its carcinogenicity to humans Group 4 - Probably not carcinogenic to humans NTP (National Toxicology Program) None of the ingredients are listed. OSHA-Ca (Occupational Safety & Health Administration) None of the ingredients are listed. Reproductive Toxicity: Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Mild irritant effect. Symptoms/Injuries After Eye Contact: Mild irritant effect. Symptoms/Injuries After Ingestion: Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity Aquatic toxicity: No further relevant information available. 12.2. Persistence and Degradability No further relevant information available. 12.3. Bioaccumulative Potential No further relevant information available. 12.4. Mobility in Soil No further relevant information available. 12.5. Other Adverse Effects General notes: Water hazard class 1 (Self-assessment): slightly hazardous for water. Do not allow product to reach ground water, water course or sewage system. Results of PBT and vPvB assessment: PBT: Not applicable. vPvB: Not applicable. No further relevant information available. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Observe all federal, state and local environmental regulations when disposing of this material. Uncleaned packagings: Recommendation: Disposal must be made according to official regulations. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Non-Regulated Material Hazard Class |Non-Regulated Material |<PICTOGRAM PHRASE> Identification Number|Non-Regulated Material | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |Non-Regulated Material Hazard Class |Non-Regulated Material Identification Number|Non-Regulated Material Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name |Non-Regulated Material Identification Number|Non-Regulated Material |<PICTOGRAM PHRASE> Hazard Class |Non-Regulated Material | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> Section 355 (extremely hazardous substances): None of the ingredients are listed. Section 313 (Specific toxic chemical listings): None of the ingredients are listed. SARA Section 311/312 Hazard Classes | Toxic Substances Control Act (TSCA) |All ingredients are listed. 15.2 US State Regulations <COMPONENT> Proposition 65: Chemicals known to cause cancer: None of the ingredients are listed. Chemicals known to cause reproductive toxicity for females: None of the ingredients are listed. Chemicals known to cause reproductive toxicity for males: None of the ingredients are listed. Chemicals known to cause developmental toxicity: None of the ingredients are listed. Carcinogenic categories: EPA (Environmental Protection Agency): None of the ingredients are listed. TLV (Threshold Limit Value established by ACGIH): None of the ingredients are listed. NIOSH-Ca (National Institute for Occupational Safety and Health): None of the ingredients are listed. National regulations: The product is subject to be labeled according with the prevailing version of the regulations on hazardous substances. State Right to Know: 8042-47-5 Mineral Oil <20% 68611-44-9 Fumed Silica STOT SE 3, H335 <10% Thermal Stabilizer <5% 80939-62-4 C11-14 Branched Alykamines Aquatic Chronic 2, H411; Skin Irrit. 2, H315; Eye Irrit. 2A, H319; H401 <4% 41484-35-9 Antioxidant Acute Tox. 3, H331 <2% Polypropylene Glycol <1% 61790-48-5 Barium Petroleum Sulfonate <0.25% 27136-73-8 Unamine O Skin Corr. 1A, H314; Eye Dam. 1, H318; Acute Tox. 4, H302 <1% 151006-63-2 Polyalphaolefin <80% All ingredients are listed. Chemical safety assessment: A Chemical Safety Assessment has not been carried out. SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |11/18/2014 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.