Product Categories See All
Track Order Status
SDS Sheet 0075180Printer Friendly View
Safety Data Sheet | | Date of Issue: 10/10/2008 |Revision Date: |Revision Number: 1 Imperial Supplies Part Number: 0075180 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: Molub-Alloy 298-1 CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Lubricant 1.3. Name, Address, and Telephone of the Responsible Party Company Castrol Industrial North America, Inc. 150 W. Warrenville Road Naperville, IL 60563 Phone: 1-800-621-2661 1.4. Emergency Telephone Number Emergency | 1 (800) 424-9300 CHEMTREC (USA) number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) | | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) | | | | | | Signal Word (GHS-US) | Hazard Statements (GHS-US) | Precautionary Statements | (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Molybdenum sulfide |1317-33-5 |60 - 65 | Base oil - highly refined |Varies |40 - 45 | | | | | | | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: If inhaled, remove to fresh air. Get medical attention if symptoms occur. First-aid Measures After Skin Contact: Immediately wash exposed skin with soap and water. Remove contaminated clothing and shoes. Wash clothing before reuse. Clean shoes thoroughly before reuse. Get medical attention if symptoms occur. First-aid Measures After Eye Contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if symptoms occur. First-aid Measures After Ingestion: Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If potentially dangerous quantities of this material have been swallowed, call a physician immediately. Get medical attention if symptoms occur. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Use an extinguishing agent suitable for the surrounding fire. Unsuitable Extinguishing Media: Do not use water jet. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: In a fire or if heated, a pressure increase will occur and the container may burst. Explosion Hazard: Non-explosive in the presence of the following materials or conditions: open flames, sparks and static discharge and shocks and mechanical impacts. Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Protection During Firefighting: Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: No action shall be taken involving any personal risk or without suitable training. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. In accordance with good industrial hygiene and safety work practices, airborne exposures should be controlled to the lowest extent practicable. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment (see section 8). 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: Large spill: Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see section 13). Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled product. Note: see section 1 for emergency contact information and section 13 for waste disposal. Small spill: Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water soluble or absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Handling: Put on appropriate personal protective equipment (see section 8). Workers should wash hands and face before eating, drinking and smoking. Do not breathe vapor or mist. Do not ingest. Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Hygiene Measures: Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Store in accordance with local regulations. Store away from direct sunlight in a dry, cool and well ventilated area, away from incompatible materials (see section 10). Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Ingredient name Occupational exposure limits molybdenum sulfide ACGIH TLV (United States). TWA: 3 mg/mÂ³, (as Mo) 8 hour(s). Issued/Revised: 2/2001 Form: Insoluble OSHA PEL (United States). TWA: 15 mg/mÂ³, (as Mo) 8 hour(s). Issued/Revised: 6/1993 Form: Total dust Base oil - highly refined ACGIH (United States). STEL: 10 mg/mÂ³ 15 minute(s). Form: Mineral oil, mist TWA: 5 mg/mÂ³ 8 hour(s). Form: Mineral oil, mist OSHA (United States). TWA: 5 mg/mÂ³ 8 hour(s). Form: Mineral oil, mist While specific OELs for certain components may be shown in this section, other components may be present in any mist, vapor or dust produced. Therefore, the specific OELs may not be applicable to the product as a whole and are provided for guidance only. 8.2. Exposure Controls Appropriate Engineering |Use only with adequate ventilation. If user Controls |operations generate dust, fumes, gas, vapor or mist, |use process enclosures, local exhaust ventilation or |other engineering controls to keep worker exposure |to airborne contaminants below any recommended or |statutory limits. Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection |The correct choice of protective gloves depends upon |the chemicals being handled, the conditions of work |and use, and the condition of the gloves (even the |best chemically resistant glove will break down |after repeated chemical exposures). Most gloves |provide only a short time of protection before they |must be discarded and replaced. Because specific |work environments and material handling practices |vary, safety procedures should be developed for each |intended application. Gloves should therefore be |chosen in consultation with the |supplier/manufacturer and with a full assessment of |the working conditions. Eye Protection |Avoid contact with eyes. Safety glasses with side |shields or chemical goggles. Skin and Body Protection |Avoid contact with skin and clothing. Wear suitable |protective clothing. Respiratory Protection |Use adequate ventilation. In accordance with good |industrial hygiene and safety work practices, |airborne exposures should be controlled to the |lowest extent practicable. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Liquid. [Grease] Appearance | Odor |Characteristic. Odor Threshold | pH | Relative Evaporation Rate | (butylacetate=1) | Melting Point | Freezing Point | Boiling Point | Flash Point |Open cup: 224Â°C (435.2Â°F) [Cleveland.] Auto-ignition Temperature | Decomposition Temperature | Flammability (solid, gas) | Vapor Pressure | Relative Vapor Density at 20 Â°C | Relative Density | Specific Gravity |1.71 Solubility |Insoluble in water Partition coefficient: | n-octanol/water | Viscosity | Lower Flammable Limit | Upper Flammable Limit | 9.2. Other Information SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity The product is stable. 10.2 Chemical Stability 10.3 Possibility of Hazardous Reactions Under normal conditions of storage and use, hazardous reactions will not occur. 10.4 Conditions to Avoid Avoid all possible sources of ignition (spark or flame). 10.5 Incompatible Materials Reactive or incompatible with the following materials: oxidizing materials, metals and acids. 10.6 Hazardous Decomposition Products Under normal conditions of storage and use, hazardous decomposition products should not be produced. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: Germ Cell Mutagenicity: Carcinogenicity: No known significant effects or critical hazards. Reproductive Toxicity: Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity 12.2. Persistence and Degradability 12.3. Bioaccumulative Potential 12.4. Mobility in Soil 12.5. Other Adverse Effects No testing has been performed by the manufacturer. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe way. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Not classified as hazardous for transport. Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |Not classified as hazardous for transport. Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name |Not classified as hazardous for transport. Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> SARA 313: This product does not contain any hazardous ingredients at or above regulated thresholds. CERCLA: CERCLA: CERCLA Sections Hazardous substances.: No products were found. SARA Section 311/312 Hazard Classes |Molub-Alloy 298-1: Immediate (acute) health |hazard Toxic Substances Control Act (TSCA) |TSCA 12(b) annual export notification: |Mercury 15.2 US State Regulations <COMPONENT> Massachusetts Substances: The following components are listed: MOLYBDENUM DISULFIDE New Jersey Hazardous Substances: The following components are listed: MOLYBDENUM (IV) SULFIDE Pennsylvania RTK Hazardous Substances: None of the components are listed. California Prop. 65: WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Mercury WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. lead; Cadmium SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date | 10/10/2008 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.