Product Categories See All
Track Order Status
SDS Sheet 0073810Printer Friendly View
Safety Data Sheet Date of Issue: 11/30/12 |Revision Date: |Revision Number: Imperial Supplies Part Number: 0073810 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: ORANGE CLASSIC INDUSTRIAL HAND CLEANER CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Industrial Hand Cleaner 1.3. Name, Address, and Telephone of the Responsible Party Company Zep Inc. 1310 Seaboard Industrial Blvd. Atlanta, GA 30318 Phone: 1-877-793-7776 1.4. Emergency Telephone Number Emergency |For MSDS Information: number |Compliance Services 1-877-793-7776 | |For Medical Emergency |(877) 541-2016 Toll Free - All Calls Recorded | |For Transportation Emergency |CI IEMTREC: (800) 424-9300 - All Calls Recorded |In the District of Columbia (202) 483-7616 SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) | | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) | | | | | | Signal Word (GHS-US) | Hazard Statements (GHS-US) | Precautionary Statements | (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Amides, coco, |68603-42-9 |1-5 | N,N-bis(hydroxyethyl) | | | Alcohols, C12-16, ethoxylated |68551-12-2 |1-5 | | | | | | | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: Inhalation not likely under normal use conditions. First-aid Measures After Skin Contact: This product is formulated for use on the skin, but should always be immediately rinsed off with plenty of water. Get medical attention if irritation develops. First-aid Measures After Eye Contact: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention. First-aid Measures After Ingestion: Aspiration hazard if swallowed. Can enter lungs and cause damage. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Never give anything by mouth to an unconscious person. If affected person is conscious, give plenty of water to drink. Get medical attention immediately. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Routes of Entry: Dermal contact. Symptoms/Injuries After Inhalation: No known acute effects of this product resulting from inhalation. Symptoms/Injuries After Skin Contact: May cause skin sensitization. May cause allergic reactions in certain individuals. Symptoms/Injuries After Eye Contact: May cause eye irritation. Inflammation of the eye is characterized by redness, watering and itching. Symptoms/Injuries After Ingestion: Ingestion may cause gastrointestinal irritation and diarrhea. Chronic Symptoms: Prolonged or repeated contact may dry skin and cause irritation. 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Unsuitable Extinguishing Media: 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: In a fire or if heated, a pressure increase will occur and the container may burst. Explosion Hazard: Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Protection During Firefighting: Use an extinguishing agent suitable for the surrounding fire. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: Move containers from spill area. Dilute with water and mop up if water-soluble or absorb with an inert dry material and place in an appropriate waste disposal container. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Wash contaminated clothing before reusing. Do not reuse container. Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see section 10) and food and drink. Store between the following temperatures: 40Â°F - 120Â°F (4. 4Â°C - 49Â°C). Keep out of the reach of children. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters 8.2. Exposure Controls Appropriate Engineering | Controls | Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection | Eye Protection |No special precautions are necessary if used as |intended. Skin and Body Protection |No special protection is required. Respiratory Protection |A respirator is not needed under normal and intended |conditions of product use. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Liquid. [Viscous liquid.] Appearance | Odor |Pleasant. Citrus Odor Threshold | pH |7.5 to 8.5 Relative Evaporation Rate |>1 (Water =1) (butylacetate=1) | Melting Point | Freezing Point | Boiling Point |Not available. Flash Point | Auto-ignition Temperature | Decomposition Temperature | Flammability (solid, gas) | Vapor Pressure |Not available. Relative Vapor Density at 20 Â°C |Not available. Relative Density | Specific Gravity |1.02 Solubility |Emulsifies in water. Partition coefficient: | n-octanol/water | Viscosity | Lower Flammable Limit | Upper Flammable Limit | 9.2. Other Information VOC (Consumer) 8.1 %(w/w> 0.688 lbs/gal (82.4 g/l) SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity The product is stable. 10.2 Chemical Stability Reactive or incompatible with the following materials: oxidizing materials. 10.3 Possibility of Hazardous Reactions Hazardous Polymerization: Under normal conditions of storage and use, hazardous polymerization will not occur. 10.4 Conditions to Avoid 10.5 Incompatible Materials 10.6 Hazardous Decomposition Products carbon oxides (CO, CO2). SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Not available. Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: Germ Cell Mutagenicity: Carcinogenicity: Reproductive Toxicity: Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity Not available. 12.2. Persistence and Degradability 12.3. Bioaccumulative Potential 12.4. Mobility in Soil 12.5. Other Adverse Effects SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Waste must be disposed of in accordance with federal, state and local environmental control regulations. Consult your local or regional authorities for additional information. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |No Regulated Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |No Regulated Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name | Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> SARA 313 toxic chemical notification and release reporting: No products were found. Clean Water Act (CWA) 311: No products were found. Clean Air Act (CAA) 112 regulated toxic substances: No products were found. SARA Section 311/312 Hazard Classes | Toxic Substances Control Act (TSCA) |All Components of this product are listed or |exempt from listing on TSCA Inventory. 15.2 US State Regulations <COMPONENT> California Prop 65: No products were found. SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |11/30/12 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.