MSDS Sheet 0066250

        
     
                  MATERIAL SAFETY DATA SHEET
          

SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
       
PRODUCT NAME         : EP 2 GREASE
IDENTIFICATION NUMBER: 6625 & 6625-1                   DATE PRINTED: 11/20/08
PRODUCT USE/CLASS    : MULTI-PURPOSE LUBRICANT

MANUFACTURED FOR:                   
IMPERIAL SUPPLIES LLC
789 ARMED FORCES DR
GREEN BAY, WI 54307-1008
 
 EMERGENCY TELEPHONE:             EMERGENCY AGENCY: 
 1-800-255-3924 (24 HOURS)        CHEM-TEL

PREPARER: CUSTOMER SERVICE, PHONE: , PREPARE DATE: 11/20/08

       
 SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS
       
                                                                      WT/WT %
ITEM    ------------ CHEMICAL NAME -------------      CAS NUMBER     LESS THAN
       

 01     ETHANOL-A2                                     64-17-5        35.0 %
 02     PROPANE/ISOBUTANE/N-BUTANE                     68476-86-8     35.0 %
 03     METHYL ALCOHOL                                 67-56-1         5.0 %


       ---------------------- EXPOSURE LIMITS --------------------
              ACGIH                     OSHA              COMPANY
ITEM   TLV-TWA       TLV-STEL    PEL-TWA      PEL-CEILING TLV-TWA     SKIN
       

 01    200 PPM SKIN  250 PPM   SKIN 200 PPM      N.E.      N.E.        NO
 02    1000 PPM      N.E.           800 PPM      N.E.      N.E.        YES
 03    200 PPM SKIN  250 PPM SKIN   200 PPM SKIN N.E.      N.E.        NO

 (See Section 16 for abbreviation legend)
       
                      
  SECTION 3 - HAZARDS IDENTIFICATION
       

*** EMERGENCY OVERVIEW ***: Vapors irritating to eyes and respiratory
tract. Vapors may cause flash fire or explosion.

                     
EFFECTS OF OVEREXPOSURE - EYE CONTACT: Liquid, aerosols and vapors of this
product are irritating and can cause pain, tearing, reddening and swelling
accompanied by a stinging sensation and/or a feeling like that of fine dust
in the eyes.

EFFECTS OF OVEREXPOSURE - SKIN CONTACT: Prolonged or repeated contact can
result in defatting and drying of the skin which may result in skin
irritation and dermatitis (rash).

EFFECTS OF OVEREXPOSURE - INHALATION: Headaches, dizziness, nausea,
decreased blood pressure, changes in heart rate and cyanosis may result
from over-exposure to vapor or skin exposure. Prolonged inhalation may be
harmful.

EFFECTS OF OVEREXPOSURE - INGESTION: This material may be harmful or fatal
if swallowed. If a Corrosive product, may cause severe and permanent
damage to mouth, throat and stomach.

EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Overexposure may cause nervous
system damage. Overexposure may cause lung damage. Overexposure may cause
kidney damage. May cause liver disorder (e.g., edema, proteinuria) and
damage.

PRIMARY ROUTE(S) OF ENTRY:   SKIN CONTACT   SKIN ABSORPTION   INHALATION
INGESTION    EYE CONTACT

       
 SECTION 4 - FIRST AID MEASURES
       
FIRST AID - EYE CONTACT: Immediately flush eyes with plenty of water. Get
medical attention, if irritation persists.

FIRST AID - SKIN CONTACT: Wash with soap and water. Get medical attention
if irritation develops or persists.

FIRST AID - INHALATION: Remove to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give oxygen. Get
immediate medical attention.

FIRST AID - INGESTION: Get medical attention immediately. If swallowed,
do NOT induce vomiting. Give victim a glass of water or milk. Call a
physician or poison control center immediately. Never give anything by
mouth to an unconscious person.


SECTION 5 - FIRE FIGHTING MEASURES
       
FLASH POINT: -156 F                   LOWER EXPLOSIVE LIMIT:      1.8 %
                                      UPPER EXPLOSIVE LIMIT:     36.0 %

AUTOIGNITION TEMPERATURE: ND

EXTINGUISHING MEDIA:    ALCOHOL FOAM   CO2   DRY CHEMICAL    FOAM   WATER FOG

UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapors can travel to a source of
ignition and flash back. "Empty" containers retain product residue (liquid
and/or vapor) and can be dangerous. DO NOT PRESSURIZE, CUT, WELD, BRAZE,
SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS,
STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND
CAUSE INJURY OR DEATH. Empty drums should be completely drained, properly
bunged and promptly returned to a drum reconditioner, or properly disposed
of.

SPECIAL FIREFIGHTING PROCEDURES: Containers can build up pressure if
exposed to heat (fire). As in any fire, wear self-contained breathing
apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and full
protective gear.

       
 SECTION 6 - ACCIDENTAL RELEASE MEASURES
       
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Absorb spill
with inert material (e.g. dry sand or earth), then place in a chemical
waste container.

       
 SECTION 7 - HANDLING AND STORAGE
       
HANDLING:    Wash thoroughly after handling.

STORAGE:    Keep away from heat, sparks and flame.    Keep from freezing.

       
 SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
       
ENGINEERING CONTROLS: Local exhaust ventilation may be necessary to
control any air contaminants to within their TLVs during the use of this
product.

RESPIRATORY PROTECTION: A NIOSH/MSHA approved air purifying respirator
with an organic vapor cartridge or canister may be permissible under
certain circumstances where airborne concentrations are expected to exceed
exposure limits. Protection provided by air purifying respirators is
limited. Use a positive pressure air supplied respirator if there is any
potential for an uncontrolled release, exposure levels are not known, or
any other circumstances where air purifying respirators may not provide
adequate protection.

SKIN PROTECTION: Where contact is likely, wear chemical resistant gloves,
a chemical suit, rubber boots, and chemical safety goggles plus a face shield.

EYE PROTECTION:  Wear safety glasses with side shields (or goggles) and a
face shield.

OTHER PROTECTIVE EQUIPMENT:  STANDARD INDUSTRIAL CLOTHING STANDARDS SHOULD
BE FOLLOWED.

HYGIENIC PRACTICES: Wash hands before eating. Remove contaminated
clothing and wash before reuse. Use only in a well ventilated area.
Follow all MSDS/label precautions even after container is emptied because
they may retain product residues. Avoid prolonged or repeated contact with
skin. Avoid breathing vapors from heated material. Avoid contact with
eyes, skin, and clothing.

       
 SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
       
BOILING RANGE     : -43 - 237 F      VAPOR DENSITY   :   Is heavier than air
ODOR              : SOLVENT          ODOR THRESHOLD  :   ND
APPEARANCE        : AMBER            EVAPORATION RATE:   Is faster than Butyl
SOLUBILITY IN H2O : INSOLUBLE                            Acetate
FREEZE POINT      : ND               SPECIFIC GRAVITY:   0.7696
VAPOR PRESSURE    : ND               pH @ 0.0 %      :   NA
PHYSICAL STATE    : AEROSOL          VISCOSITY       :   ND
COEFFICIENT OF WATER/OIL DISTRIBUTION: ND
VOLATILE ORGANIC COMPOUNDS (VOCS): 4.04 lbs/gal,   484   grams/ltr


(See Section 16 for abbreviation legend)
       
                        
 SECTION 10 - STABILITY AND REACTIVITY
       
CONDITIONS TO AVOID:    ALL SOURCES OF IGNITION, WELDING ARCS, AND OPEN
FLAMES.

INCOMPATIBILITY:    STRONG ACIDS, ALKALIS, OXIDIZERS, AND AMINES.

HAZARDOUS DECOMPOSITION PRODUCTS: OXIDES OF CARBON, OXIDES OF NITROGEN,
AND MAY PRODUCE FORMS OF CHLORIDE, CHLORINE, AND PHOSGENE.

HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.

STABILITY: This product is stable under normal storage conditions.

       
 SECTION 11 - TOXICOLOGICAL PROPERTIES
       
PRODUCT LD50: 5628 mg/kg          PRODUCT LC50: 39000 ppm

COMPONENT TOXICOLOGICAL INFORMATION:

-------- CHEMICAL NAME --------    ------ LD50 ------   ------ LC50 ------
ETHANOL-A2                         9000 MG/KG/RAT       39000 MG/M3/4H/MSE
METHYL ESTER, SOYBEAN OIL          N.E.                 N.E.
PROPANE/ISOBUTANE/N-BUTANE         NE                   658000 MG/M3/4HRAT
METHYL ALCOHOL                     5628 MG/KG/RAT       86000 MG/M3/HUMAN
HEXANONE                           2080 MG/KG/RAT       100000 MG/M3/RAT


 SECTION 12 - ECOLOGICAL INFORMATION
       
ECOLOGICAL INFORMATION:     No Information.

       
 SECTION 13 - DISPOSAL CONSIDERATIONS
       
DISPOSAL METHOD:   DISPOSE IN ACCORDANCE WITH ALL FEDERAL, STATE, AND LOCAL
REGULATIONS.

       
 SECTION 14 - TRANSPORTATION INFORMATION
       
DOT PROPER SHIPPING NAME: AEROSOL - CONSUMER COMMODITY

DOT TECHNICAL NAME: ORM-D

DOT HAZARD CLASS: 2.1               HAZARD SUBCLASS: NA

DOT UN/NA NUMBER: UN1950       PACKING GROUP: NA       RESP. GUIDE PAGE: 126


 SECTION 15 - REGULATORY INFORMATION
       
U.S. FEDERAL REGULATIONS: AS FOLLOWS -

OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)

CERCLA - SARA HAZARD CATEGORY:
This product has been reviewed according to the EPA 'Hazard Categories'
promulgated under Sections 311 and 312 of the Superfund Amendment and
Reauthorization Act of 1986 (SARA Title III) and is considered, under
applicable definitions, to meet the following categories:

IMMEDIATE HEALTH HAZARD   CHRONIC HEALTH HAZARD   FIRE HAZARD   PRESSURIZED
GAS HAZARD

SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:

--------- CHEMICAL NAME ---------   CAS NUMBER    WT/WT % IS LESS THAN
METHYL ALCOHOL                      67-56-1                     5.0 %

TOXIC SUBSTANCES CONTROL ACT:
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12(B) if exported from the United States:

----------- CHEMICAL NAME -----------     CAS NUMBER
ETHANOL-A2                                 64-17-5
METHYL ALCOHOL                             67-56-1
HEXANONE                                   108-10-1

U.S. STATE REGULATIONS: AS FOLLOWS -

NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five
components in this product:

----------- CHEMICAL NAME -----------     CAS NUMBER
METHYL ESTER, SOYBEAN OIL                 67784-80-9

PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at
greater than 3%:

----------- CHEMICAL NAME -----------      CAS NUMBER
METHYL ESTER, SOYBEAN OIL                  67784-80-9

CALIFORNIA PROPOSITION 65:
WARNING: The chemical(s) noted below and contained in this product, are
known to the state of California to cause cancer, birth defects or other
reproductive harm:

----------- CHEMICAL NAME -----------    CAS NUMBER
No Proposition 65 chemicals exist in this product.

INTERNATIONAL REGULATIONS: AS FOLLOWS -

CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.

CANADIAN WHMIS CLASS: No information available.

       
 SECTION 16 - OTHER INFORMATION
       
HMIS RATINGS -    HEALTH: 1        FLAMMABILITY: 4     REACTIVITY: 0

PREVIOUS MSDS REVISION DATE: 11/18/08

REASON FOR REVISION: NEW FORMULA

LEGEND:   N.A. - Not Applicable,    N.E. - Not Established,
          N.D. - Not Determined

       

   *** THIS MSDS IS NOT FOR REPRODUCTION OR DISTRIBUTION ***
The information contained on this MSDS has been checked and should be
accurate. However, it is the responsibility of the user to comply with all
Federal, State, and Local laws and regulations.
       
<END OF MSDS>
    

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'MSDS' shall be created or inferred by any statement in this 'MSDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'MSDS'. The user is responsible for full compliance.