Product Categories See All
Track Order Status
SDS Sheet 0065920Printer Friendly View
SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Aerosol. Product Name: L2 MOISTURE DISPLACER/DEEP PENETRANT CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Lubricant 1.3. Name, Address, and Telephone of the Responsible Party Company: Sprayway, Inc. 1005 S. Westgate Drive Addison, IL 60101 United States Phone: 1-630-628-3000 1.4. Emergency Telephone Number Emergency | 1-866-836-8855, 1-952-852-4646 number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Flammable |Category 1 aerosols | Carcinogenicit|Category 2 y | Aspiration |Category 1 hazard | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |Flame |Health Hazard Signal Word (GHS-US) |Danger Hazard Statements (GHS-US) |Extremely flammable aerosol. May be fatal if |swallowed and enters airways. Suspected of causing |cancer. Precautionary Statements |Prevention (GHS-US) |Obtain special instructions before use. Do not |handle until all safety precautions have been read |and understood. Keep away from heat/sparks/open |flames/hot surfaces. - No smoking. Do not spray on |an open flame or other ignition source. Pressurized |container: Do not pierce or burn, even after use. |Avoid release to the environment. Wear protective |gloves/protective clothing/eye protection/face |protection. |Response |If swallowed: Immediately call a poison |center/doctor. If exposed or concerned: Get medical |advice/attention. Do NOT induce vomiting. Collect |spillage. |Storage |Store locked up. Protect from sunlight. Do not |expose to temperatures exceeding 50Â°C/122Â°F. |Disposal |Dispose of contents/container in accordance with |local/regional/national/international regulations. 2.3. Other Hazards Other Hazards Not Contributing to the Classification: None known. 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Perchloroethylene |127-18-4 |40 - 60 | Distillates (Petroleum), |64742-47-8 |20 - 40 | Hydrotreated Light | | | Carbon Dioxide |124-38-9 |1 - 2.5 | Other components below | |2.5 - 10| reportable levels | | | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: IF exposed or concerned: Get medical advice/attention. Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. First-aid Measures After Inhalation: If symptoms develop move victim to fresh air. Get medical attention if symptoms persist. First-aid Measures After Skin Contact: Wash off with soap and water. Get medical attention if irritation develops and persists. First-aid Measures After Eye Contact: Rinse with water. Get medical attention if irritation develops and persists. First-aid Measures After Ingestion: Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Provide general supportive measures and treat symptomatically. Keep victim under observation. Symptoms may be delayed. Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: Dizziness. Headache. Nausea. Irritation of eyes and mucous membranes. Irritation of nose and throat. Aspiration may cause pulmonary edema and pneumonitis. Skin irritation. 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed Provide general supportive measures and treat symptomatically. Keep victim under observation. Symptoms may be delayed. SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Alcohol resistant foam. Water fog. Dry chemical powder. Dry chemicals. Carbon dioxide (CO2). Unsuitable Extinguishing Media: Do not use water jet as an extinguisher, as this will spread the fire. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Contents under pressure. Pressurized container may explode when exposed to heat or flame. Extremely flammable aerosol. Explosion Hazard: Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighters must use standard protective equipment including flame retardant coat, helmet with face shield, gloves, rubber boots, and in enclosed spaces, SCBA. Firefighting Instructions: Move containers from fire area if you can do so without risk. Cool containers exposed to heat with water spray and remove container, if no risk is involved. Containers should be cooled with water to prevent vapor pressure build up. For massive fire in cargo area, use unmanned hose holder or monitor nozzles, if possible. If not, withdraw and let fire burn out. Specific methods: Use standard firefighting procedures and consider the hazards of other involved materials. Move containers from fire area if you can do so without risk. In the event of fire and/or explosion do not breathe fumes. Protection During Firefighting: Firefighters must use standard protective equipment including flame retardant coat, helmet with face shield, gloves, rubber boots, and in enclosed spaces, SCBA. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: 6.1.1. For Non-emergency Personnel Protective Equipment: Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Keep out of low areas. Wear appropriate protective equipment and clothing during clean-up. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate closed spaces before entering them. Local authorities should be advised if significant spillages cannot be contained. For personal protection, see section 8 of the SDS. Emergency Procedures: Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Keep out of low areas. Wear appropriate protective equipment and clothing during clean-up. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate closed spaces before entering them. Local authorities should be advised if significant spillages cannot be contained. For personal protection, see section 8 of the SDS. 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions Avoid release to the environment. Inform appropriate managerial or supervisory personnel of all environmental releases. Prevent further leakage or spillage if safe to do so. Avoid discharge into drains, water courses or onto the ground. 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: Refer to attached safety data sheets and/or instructions for use. Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Keep combustibles (wood, paper, oil, etc.) away from spilled material. Stop leak if you can do so without risk. Move the cylinder to a safe and open area if the leak is irreparable. Use water spray to reduce vapors or divert vapor cloud drift. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place into containers. Prevent entry into waterways, sewer, basements or confined areas. Following product recovery, flush area with water. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination. For waste disposal, see section 13 of the SDS. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Pressurized container: Do not pierce or burn, even after use. Do not use if spray button is missing or defective. Do not spray on a naked flame or any other incandescent material. Do not smoke while using or until sprayed surface is thoroughly dry. Do not cut, weld, solder, drill, grind, or expose containers to heat, flame, sparks, or other sources of ignition. All equipment used when handling the product must be grounded. Do not re-use empty containers. Avoid prolonged or repeated contact with skin. Avoid prolonged exposure. Use only in well-ventilated areas. Should be handled in closed systems, if possible. Wear appropriate personal protective equipment. Wash hands thoroughly after handling. Avoid release to the environment. Observe good industrial hygiene practices. Hygiene Measures: When using do not smoke. Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Level 1 Aerosol. Store locked up. Pressurized container. Protect from sunlight and do not expose to temperatures exceeding 50Â°C/122 Â°F. Do not puncture, incinerate or crush. Do not handle or store near an open flame, heat or other sources of ignition. This material can accumulate static charge which may cause spark and become an ignition source. Store away from incompatible materials (see Section 10 of the SDS). 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Occupational exposure limits US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) Components Type Value Carbon Dioxide (CAS 124-38-9) PEL 9000 mg/m3 5000 ppm US. OSHA Table Z-2 (29 CFR 1910.1000) Components Type Value Perchloroethylene (CAS 127-18-4) Ceiling 200 ppm TWA 100 ppm US. ACGIH Threshold Limit Values Components Type Value Carbon Dioxide (CAS 124-38-9) STEL 30000 ppm TWA 5000 ppm Perchloroethylene (CAS 127-18-4) STEL 100 ppm TWA 25 ppm US. NIOSH: Pocket Guide to Chemical Hazards Components Type Value Carbon Dioxide (CAS 124-38-9) STEL 54000 mg/m3 30000 ppm TWA 9000 mg/m3 5000 ppm Biological limit values ACGIH Biological Exposure Indices Components Value Determinant Specimen Sampling Time Perchloroethylene (CAS 0.5 mg/l Tetrachloroethylene Blood * 127-18-4) 3 ppm Tetrachloroethylene End-exhaled air * * - For sampling details, please see the source document. 8.2. Exposure Controls Appropriate Engineering |Good general ventilation (typically 10 air changes Controls |per hour) should be used. Ventilation rates should |be matched to conditions. If applicable, use process |enclosures, local exhaust ventilation, or other |engineering controls to maintain airborne levels |below recommended exposure limits. If exposure |limits have not been established, maintain airborne |levels to an acceptable level. Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection |Wear appropriate chemical resistant gloves. Eye Protection |Chemical respirator with organic vapor cartridge and |full facepiece. Skin and Body Protection |Use of an impervious apron is recommended. Respiratory Protection |Chemical respirator with organic vapor cartridge and |full facepiece. Thermal Hazard Protection |Wear appropriate thermal protective clothing, when |necessary. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Liquid. Appearance | Odor |Not available. Odor Threshold |Not available. pH |Not available. Relative Evaporation Rate |Not available. (butylacetate=1) | Melting Point |Not available. Freezing Point |Not available. Boiling Point |250.34 Â°F (121.3 Â°C) estimated Flash Point |174.2 Â°F (79.0 Â°C) estimated Auto-ignition Temperature |456.8 Â°F (236 Â°C) estimated Decomposition Temperature |Not available. Flammability (solid, gas) |Not available. Vapor Pressure |70 - 90 psig @70F estimated Relative Vapor Density at 20 Â°C |Not available. Relative Density |1.195 g/cm3 estimated Specific Gravity | Solubility |Not available. Partition coefficient: |Not available. n-octanol/water | Viscosity |Not available. Lower Flammable Limit |0.6 % estimated Upper Flammable Limit |5.5 % estimated 9.2. Other Information Density 1.25 g/cm3 estimated Flammability class Combustible IIIA estimated Heat of combustion 15.33 kJ/g estimated Heat of combustion (NFPA 30B) 14.03 kJ/g estimated Percent volatile 58.8 % estimated Specific gravity 1.195 estimated VOC (Weight %) 58.88 % estimated SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity The product is stable and non-reactive under normal conditions of use, storage and transport. 10.2 Chemical Stability Material is stable under normal conditions. 10.3 Possibility of Hazardous Reactions Hazardous polymerization does not occur. 10.4 Conditions to Avoid Avoid temperatures exceeding the flash point. Contact with incompatible materials. 10.5 Incompatible Materials Strong oxidizing agents. 10.6 Hazardous Decomposition Products Hydrogen chloride. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: May be fatal if swallowed and enters airways. Skin Corrosion/Irritation: Prolonged skin contact may cause temporary irritation. Serious Eye Damage/Irritation: Direct contact with eyes may cause temporary irritation. Respiratory or Skin Sensitization: Not available. This product is not expected to cause skin sensitization. Germ Cell Mutagenicity: No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic. Carcinogenicity: Suspected of causing cancer. IARC Monographs. Overall Evaluation of Carcinogenicity Perchloroethylene (CAS 127-18-4) 2A Probably carcinogenic to humans. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not listed. US. National Toxicology Program (NTP) Report on Carcinogens Perchloroethylene (CAS 127-18-4) Reasonably Anticipated to be a Human Carcinogen. Reproductive Toxicity: This product is not expected to cause reproductive or developmental effects. Specific Target Organ Toxicity (Single Exposure): Not classified. Specific Target Organ Toxicity (Repeated Exposure): Not classified. Aspiration Hazard: May be fatal if swallowed and enters airways. Symptoms/Injuries After Inhalation: Prolonged inhalation may be harmful. Symptoms/Injuries After Skin Contact: No adverse effects due to skin contact are expected. Symptoms/Injuries After Eye Contact: Direct contact with eyes may cause temporary irritation. Symptoms/Injuries After Ingestion: Droplets of the product aspirated into the lungs through ingestion or vomiting may cause a serious chemical pneumonia. Chronic Symptoms: Prolonged inhalation may be harmful. Prolonged exposure may cause chronic effects. SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity Toxic to aquatic life with long lasting effects. Product Species Test Results L2 MOISTURE DISPLACER/DEEP PENETRANT (CAS Mixture) Aquatic Crustacea EC50 Daphnia 11.7062 mg/l, 48 hours estimated Fish LC50 Fish 6.2803 mg/l, 96 hours estimated Components Species Test Results Distillates (Petroleum), Hydrotreated Light (CAS 64742-47-8) Aquatic Fish LC50 Rainbow trout,donaldson trout 2.9 mg/l, 96 hours (Oncorhynchus mykiss) Perchloroethylene (CAS 127-18-4) Aquatic Crustacea EC50 Daphnia 7.55 mg/L, 48 Hours Water flea (Daphnia magna) 6.1 - 9 mg/l, 48 hours Fish LC50 Rainbow trout,donaldson trout 4.82 mg/l, 96 hours (Oncorhynchus mykiss) 12.2. Persistence and Degradability No data is available on the degradability of this product. 12.3. Bioaccumulative Potential No data available. Partition coefficient n-octanol / water (log Kow) Perchloroethylene 3.4 12.4. Mobility in Soil No data available. 12.5. Other Adverse Effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Contents under pressure. Do not puncture, incinerate or crush. Do not allow this material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditches with chemical or used container. Dispose of contents/container in accordance with local/regional/national/international regulations. Local disposal regulations: Dispose in accordance with all applicable regulations. Additional Information: Hazardous waste code: The waste code should be assigned in discussion between the user, the producer and the waste disposal company. US RCRA Hazardous Waste U List: Reference Perchloroethylene (CAS 127-18-4) U210 Waste from residues / unused products: Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see. Disposal instructions). Contaminated packaging: Empty containers should be taken to an approved waste handling site for recycling or disposal. Since emptied containers may retain product residue, follow label warnings even after container is emptied. Do not re-use empty containers. SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Aerosols, flammable Hazard Class |2.1 | | | | |[pic] Identification Number|UN1950 | Label Codes |None | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |AEROSOLS Hazard Class |2.1 Identification Number|UN1950 Label Codes |2.1+6.1 |[pic][pic] ntification Of The | | Substance/m | | EmS-No. (Fire) |D | EmS-No. (Spillage) |U | 14.3 In Accordance with IATA Proper Shipping Name |Aerosols, flammable Identification Number|UN1950 |[pic][pic] Hazard Class |2.1 | Label Codes |2.1, 6.1 | ntification Of The | | Substance/m | | ERG Code (IATA) |10P SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. CERCLA Hazardous Substance List (40 CFR 302.4) Perchloroethylene (CAS 127-18-4) Listed. SARA 304 Emergency release notification Not regulated. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not listed SARA 302 Extremely hazardous substance: Not listed. SARA 313 (TRI reporting) Chemical name CAS number % by wt Perchloroethylene 127-18-4 40 - 60 Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List Perchloroethylene (CAS 127-18-4) Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130): Not regulated. Safe Drinking Water Act (SDWA): Not regulated. SARA Section 311/312 Hazard Classes |Immediate Hazard - Yes |Delayed Hazard - Yes |Fire Hazard - Yes |Pressure Hazard - No |Reactivity Hazard - No Toxic Substances Control Act (TSCA) |All components are on the U.S. EPA TSCA |Inventory List. |TSCA Section 12(b) Export Notification (40 |CFR 707, Subpt. D) |Not regulated 15.2 US State Regulations <COMPONENT> US. Massachusetts RTK - Substance List Carbon Dioxide (CAS 124-38-9) Perchloroethylene (CAS 127-18-4) US. New Jersey Worker and Community Right-to-Know Act Carbon Dioxide (CAS 124-38-9) Perchloroethylene (CAS 127-18-4) US. Pennsylvania Worker and Community Right-to-Know Law Carbon Dioxide (CAS 124-38-9) Perchloroethylene (CAS 127-18-4) US. Rhode Island RTK Perchloroethylene (CAS 127-18-4) US. California Proposition 65 WARNING: This product contains a chemical known to the State of California to cause cancer. US - California Proposition 65 - CRT: Listed date/Carcinogenic substance Perchloroethylene (CAS 127-18-4) SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date | Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.