Product Categories See All
Track Order Status
SDS Sheet 0065770Printer Friendly View
SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: MAGIC WRENCHÃ’ AEROSOL CAS No: Synonyms: ILEX MAGIC WRENCH Â® AEROSOL 1.2. Intended Use of the Product Use of the substance/mixture: Lubricants, Greases and Release Products, Sealant 1.3. Name, Address, and Telephone of the Responsible Party Company: Jet-Lube, Inc. 4849 Homestead Rd. Suite 232 Houston, Texas 77028 Phone: 713-670-5700 1.4. Emergency Telephone Number Emergency |CHEMTREC: +1-703-527-3887 (INTERNATIONAL) number |1-800-424-9300 (NORTH AMERICA) SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Serious Eye |Category 2 Damage/Eye | Irritation | Flammable |Category 1 aerosols | Gases under |Compressed pressure |gas 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |Exclamation Mark |Flame |Gas Cylinder Signal Word (GHS-US) |Danger Hazard Statements (GHS-US) |. Causes serious eye irritation |. Extremely flammable aerosol |. Contains gas under pressure; may explode if heated Precautionary Statements |Prevention: (GHS-US) |. Wash face, hands and any exposed skin thoroughly |after handling. |. Wear eye/face protection. |. Keep away from heat/sparks/open flames/hot |surfaces - No smoking. |. Do not spray on an open flame or other ignition |source |. Pressurized container: Do not pierce or burn, even |after use. | |General Advice: |. None | |Eyes: |. IF IN EYES: Rinse cautiously with water for |several minutes. Remove contact lenses, if present |and easy to do. Continue rinsing. |. If eye irritation persists: Get medical |advice/attention. | |Storage: |. Protect from sunlight. Do not expose to |temperatures exceeding 50 Â°C/122 Â°F |. Protect from sunlight. Store in a well-ventilated |place | |Disposal: |. None 2.3. Other Hazards Other Hazards Not Contributing to the Classification: Not applicable 2.4. Unknown Acute Toxicity (GHS-US) Other information May cause long lasting harmful effects to aquatic life 57.5% of the mixture consists of ingredient(s) of unknown toxicity. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name 4.1. Description of First Aid Measures First-aid Measures General: Immediate medical attention is not required. If symptoms persist, call a physician. Show this safety data sheet to the doctor in attendance. First-aid Measures After Inhalation: Move to fresh air. If symptoms persist, call a physician. First-aid Measures After Skin Contact: Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes. If skin irritation persists, call a physician. In case of contact with liquefied gas, thaw frosted parts with lukewarm water. First-aid Measures After Eye Contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If symptoms persist, call a physician. First-aid Measures After Ingestion: Not an expected route of exposure. Clean mouth with water and afterwards drink plenty of water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Consult a physician if necessary. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed Protection of First-aiders: Remove all sources of ignition. Use personal protective equipment. Notes to Physician: Treat symptomatically. SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Water spray. Carbon dioxide (CO 2 ). Alcohol-resistant foam. Dry chemical. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Unsuitable Extinguishing Media: No information available. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Keep product and empty container away from heat and sources of ignition. Containers may explode when heated. Explosion Hazard: Sensitivity to Mechanical Impact None. Sensitivity to Static Discharge Yes. Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Protection During Firefighting: Cool closed containers exposed to fire with water spray. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: Contents under pressure. Remove all sources of ignition. Evacuate personnel to safe areas. Ensure adequate ventilation. Use personal protective equipment. 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions Do not flush into surface water or sanitary sewer system. Avoid release to the environment. Dispose of contents/container to an approved waste disposal plant. See Section 12 for additional Ecological Information. 6.3. Methods and Material for Containment and Cleaning Up For Containment: Prevent further leakage or spillage if safe to do so. Methods for Cleaning Up: Soak up with inert absorbent material. Pick up and transfer to properly labeled containers. Clean contaminated surface thoroughly. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Ensure adequate ventilation. Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharges. Use only in an area containing flame proof equipment. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Use only in area provided with appropriate exhaust ventilation. Wear personal protective equipment. Do not breathe vapors or spray mist. Do not eat, drink or smoke when using this product. Hygiene Measures: Handle in accordance with good industrial hygiene and safety practice. 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Keep containers tightly closed in a dry, cool and well-ventilated place. Keep in properly labeled containers. Keep away from direct sunlight. Store in accordance with local regulations. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Exposure Guidelines Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH White mineral oil 8042-47-5 TWA: 5 mg/m3 inhalable fraction excluding metal working fluids, highly & severely refined TWA: 5 mg/m3 (vacated) TWA: 5 mg/m3 IDLH: 2500 mg/m3 TWA: 5 mg/m3 STEL: 10 mg/m3 Petroleum gases 68476-85-7 TWA: 1000 ppm TWA: 1000 ppm TWA: 1800 mg/m3 (vacated) TWA: 1000 ppm (vacated) TWA: 1800 mg/m3 IDLH: 2000 ppm TWA: 1000 ppm TWA: 1800 mg/m3 8.2. Exposure Controls Appropriate Engineering |Showers Controls |Eyewash stations |Ventilation systems Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection | Eye Protection |If splashes are likely to occur, wear: Safety |glasses with side-shields. Skin and Body Protection |Long sleeved clothing. Protective gloves. Respiratory Protection |When workers are facing concentrations above the |exposure limit they must use appropriate certified |respirators. In the case of dust or aerosol |formation use respirator with an approved filter. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Liquid, Aerosol Appearance |translucent to clear off-white Odor |Slight Odor Threshold |No information available pH |Neutral Relative Evaporation Rate |No data available (butylacetate=1) | Melting Point |< -40 Â°C / -40 Â°F Freezing Point |< -40 Â°C / -40 Â°F Boiling Point |> 260 Â°C Flash Point |> 232 Â°C / 450 Â°F Auto-ignition Temperature |No data available Decomposition Temperature |No data available Flammability (solid, gas) |No data available Vapor Pressure |No data available Relative Vapor Density at 20 Â°C |No data available Relative Density | Specific Gravity |0.80 Solubility |Insoluble in water. Partition coefficient: |No data available n-octanol/water | Viscosity |33 cSt @ 40Â°C Lower Flammable Limit |No data available Upper Flammable Limit |No data available 9.2. Other Information VOC Content (%) No data available VOC (g/l) 80 SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity No data available. 10.2 Chemical Stability Stable under recommended storage conditions. 10.3 Possibility of Hazardous Reactions None under normal processing. 10.4 Conditions to Avoid Heat, flames and sparks. Keep away from direct sunlight. Incompatible products. 10.5 Incompatible Materials Strong acids. Oxidizing agents. 10.6 Hazardous Decomposition Products None known based on information supplied. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: 57.5% of the mixture consists of ingredient(s) of unknown toxicity. Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: No information available. Germ Cell Mutagenicity: No information available. Carcinogenicity: The table below indicates whether each agency has listed any ingredient as a carcinogen. Chemical Name ACGIH IARC NTP OSHA White mineral oil A2 Reproductive Toxicity: No information available. Specific Target Organ Toxicity (Single Exposure): No information available. Specific Target Organ Toxicity (Repeated Exposure): No information available. Aspiration Hazard: No information available. Symptoms/Injuries After Inhalation: None known. Symptoms/Injuries After Skin Contact: None known. Symptoms/Injuries After Eye Contact: Causes serious eye irritation. Symptoms/Injuries After Ingestion: Not an expected route of exposure. Ingestion of larger amounts may cause defects to the central nervous system (e.g. dizziness, headache). Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. Chemical Name LD50 Oral LD50 Dermal LC50 Inhalation White mineral oil > 5000 mg/kg ( Rat ) - - Chronic Symptoms: No information available. SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity The environmental impact of this product has not been fully investigated. Chemical Name Toxicity to Algae Toxicity to Fish Toxicity to Microorganisms Daphnia Magna (Water Flea) White mineral oil 8042-47-5 LC50 96 h: > 10000 mg/L (Lepomis macrochirus) 12.2. Persistence and Degradability No information available. 12.3. Bioaccumulative Potential Chemical Name Log Pow White mineral oil 6.006 Petroleum gases 2.8 12.4. Mobility in Soil 12.5. Other Adverse Effects No information available. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Dispose of in accordance with federal, state, and local regulations. Additional Information: Contaminated Packaging: Do not re-use empty containers. SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Aerosols Hazard Class |2.1 |<PICTOGRAM PHRASE> Identification Number|UN1950 | Label Codes | | ERG Number |126 14.2 In Accordance with IMDG Proper Shipping Name |Aerosols Hazard Class |2 Identification Number|UN1950 Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) |D | EmS-No. (Spillage) |U | 14.3 In Accordance with IATA Proper Shipping Name |Aerosols, flammable Identification Number|UN1950 |<PICTOGRAM PHRASE> Hazard Class |2.1 | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) |10L SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> SARA Section 311/312 Hazard Classes |Acute Health Hazard |Yes |Chronic Health Hazard |No |Fire Hazard |Yes |Sudden Release of Pressure Hazard |No |Reactive Hazard |No Toxic Substances Control Act (TSCA) | 15.2 US State Regulations California Proposition 65: This product does not contain any Proposition 65 chemicals. U.S. State Right-to-Know Regulations: "X" designates that the ingredients are listed on the state right to know list. Chemical Name New Jersey Massachusetts Pennsylvania Illinois Rhode Island White mineral oil X X X X Petroleum distillates X X X X SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |03-Dec-2014 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.