Register Now    |    Login

National Distributor of Quality Maintenance Supplies Since 1958


Track Order Status
Order No:
Zip Code:

SDS Sheet 0065741

Printer Friendly View

SECTION 1: IDENTIFICATION                                                       

1.1.  Product Identifier
Product Form: Aerosol                                                           
Product Name: TDL                                                               
CAS No:                                                                         

1.2.  Intended Use of the Product
Use of the substance/mixture: Dry Film lubricant                                

1.3.  Name, Address, and Telephone of the Responsible Party
The Blaster Corp                                                                
8500 Sweet Valley Dr.                                                           
Valley View, OH 44125                                                           
Phone: (216)-901-5800                                                           

1.4.  Emergency Telephone Number
Emergency     |Chemtrec (800) 424-9300                                          
number        |                                                                 

SECTION 2: HAZARDS IDENTIFICATION                                               

2.1.  Classification of the Substance or Mixture
Classification (GHS-US)
Flammable     |Category 1    
Aerosols      |              
Gas under     |Compressed Gas
pressure      |              
Skin          |Category 3    
Irritation    |              
Category 2,   |              
Specific      |              
target organ  |              
toxicity,     |              
single        |              
exposure      |              
Aspiration    |Category 1    
hazard        |              
Acute aquatic |Category 1    
toxicity      |              
Chronic       |Category 1    
aquatic       |              
toxicity      |              

2.2.  Label Elements
GHS-US Labeling
Hazard Pictograms (GHS-US)   |Flame |Health Hazard |Environment |Exclamation
Mark |Gas Cylinder
Signal Word (GHS-US)         |Danger                                            
Hazard Statements (GHS-US)   |H222 Extremely flammable aerosol                  
                             |H229 Pressurized container: may burst if heated   
                             |H222 Extremely flammable aerosol                  
                             |H229 Pressurized container: may burst if heated   
                             |H280 Contains gas under pressure, may explode if  
                             |H304 May be fatal if swallowed and enters airways 
                             |H315 Causes Skin irritation                       
                             |H400 Very toxic to aquatic life                   
                             |H410 Very toxic to aquatic life with lasting
Precautionary Statements     |P210 Keep away from heat, hot surfaces, sparks,
(GHS-US)                     |flames, and other ignition sources. No smoking.   
                             |P251 Pressurized container: Do not pierce or burn,
                             |even after use                                    
                             |P261 Avoid breathing dust/fume/gas/mist
                             |P264 Wash...thoroughly after handling.            
                             |P271 Use only outdoors or in a well-ventilated
                             |P280 Wear protective gloves/protective
                             |protection/face protection.                       
                             |P301+P310 If Swallowed: Immediately call a poison 
                             |center or doctor                                  
                             |P304+P340 If Inhaled: Remove person to fresh air
                             |keep comfortable for breathing.                   
                             |P332+P352 If skin irritation occurs: wash with    
                             |plenty of water and soap.                         
                             |P403+P233 Store in well ventilated place Keep     
                             |container tightly closed.                         
                             |P410+P412 Protect from sunlight. Don not expose to
                             |temperatures exceeding 50°C/122°F                 
                             |P501 Dispose of contents/container in accordance  
                             |with local/regional regulations.                  

2.3.  Other Hazards
Other Hazards Not Contributing to the Classification:                           

2.4.  Unknown Acute Toxicity (GHS-US)


3.1.  Substance
Name                            |Product identifier   |%       |Classification  
                                |                     |        |(GHS-US)        
                                |                     |        |                
                                |                     |        |                
                                |                     |        |                
                                |                     |        |                
                                |                     |        |                

Full text of H-phrases: See Section 16
3.2.  Mixture
Name                            |Product identifier   |%       |Classification  
                                |                     |        |(GHS-US)        
n-Heptane                       |142-82-5             |85-99%  |                
Toluene                         |108-88-3             |0-2%    |                
Polytetrafluoroethylene         |9002-84-0            |1-5%    |                
Carbon Dioxide                  |124-38-9             |.1-10 % |                
                                |                     |        |                

SECTION 4: FIRST AID MEASURES                                                   

4.1.  Description of First Aid Measures
First-aid Measures General:                                                     
First-aid Measures After Inhalation: Remove exposed individual to fresh air,    
protecting yourself. Restore breathing if necessary.                            
Contact a physician.                                                            
First-aid Measures After Skin Contact: Wash with soap and water. Remove any     
contaminated clothing and launder before reusing. If irritation persists, seek  
medical attention.                                                              
First-aid Measures After Eye Contact: Flush with warm water for 15 minutes. Seek
medical attention.                                                              
First-aid Measures After Ingestion: Seek medical attention. If individual is    
drowsy or unconscious, do not give anything by mouth; place individual on the
side with the head down. Contact a physician, medical facility, or poison
center for advice about whether to induce vomiting. If possible, do not leave   
individual unattended.                                                          

4.2.  Most important symptoms and effects, both acute and delayed
Symptoms/Injuries After Inhalation:                                             
Symptoms/Injuries After Skin Contact:                                           
Symptoms/Injuries After Eye Contact:                                            
Symptoms/Injuries After Ingestion:                                              
Chronic Symptoms:                                                               

4.3.  Indication of Any Immediate Medical Attention and Special Treatment

SECTION 5: FIRE-FIGHTING MEASURES                                               

5.1.  Extinguishing Media
Suitable Extinguishing Media: Dry chemical, carbon dioxide, halon, or foam is   
recommended. Water spray may be used to cool containers or structures. Halon may
decompose into toxic materials and carbon dioxide will displace oxygen, take    
proper precautions when using these materials.                                  
Unsuitable Extinguishing Media:                                                 

5.2.  Special Hazards Arising From the Substance or Mixture
Fire Hazard:                                                                    
Explosion Hazard: This material may be ignited by extreme heat, sparks, flames
other ignition sources (static electricity). Vapors are heavier than air and
collect in low areas (sewers) or travel considerable distances. If containers
not cooled in a fire, they may rupture and ignite.                              

5.3.  Advice for Firefighters
Precautionary Measures Fire:                                                    
Firefighting Instructions:                                                      
Protection During Firefighting: At elevated temperatures (over 130F) aerosol    
container may burst, vent or rupture; use equipment or shielding to protect     
personnel. Cooling exposed containers with streams of water may be helpful.     
Emergency responders should wear self-contained breathing apparatus. Wear other 
protective gear as conditions warrant. Keep unauthorized people out and try to  
contain spills or leaks if it can be done safely. Material will float on water, 
avoid spreading the fire.                                                       

SECTION 6: ACCIDENTAL RELEASE MEASURES                                          

6.1.  Personal Precautions, Protective Equipment and Emergency Procedures
General Measures:                                                               

6.1.1.      For Non-emergency Personnel
Protective Equipment:                                                           
Emergency Procedures:                                                           

6.1.2.      For Emergency Responders
Protective Equipment:                                                           
Emergency Procedures:                                                           

6.2.  Environmental Precautions

6.3.  Methods and Material for Containment and Cleaning Up
For Containment:                                                                
Methods for Cleaning Up: Spill or Leak Instructions: Contain spill with dikes of
soil or nonflammable absorbent to minimize contaminated area. Avoid run-off into
storm sewers and ditches leading to waterways. If required, notify state and
authorities. Place leaking containers in well-ventilated area. Clean up small   
spills by using a nonflammable absorbent or flushing sparingly with water.
larger spills with nonflammable diking or absorbent. Clean up by vacuuming or   
Keep unnecessary people away; isolate hazard area and deny entry. Stay upwind;  
keep out of low areas. Assess the spill situation, as the spill may not evolve  
large amounts of hazardous airborne contaminants in many outdoor spill
It may be advisable in some cases to simply monitor the situation until spilled 
product is removed.                                                             

6.4.  Reference to Other Sections
See heading  8, Exposure Controls and Personal Protection.                      

SECTION 7: HANDLING AND STORAGE                                                 

7.1.  Precautions for Safe Handling
Additional Hazards When Processed: Store below 120°F in cool, dry area, out of  
direct sunlight and away from strong oxidizers. Do not puncture or burst. Use in
accordance with good work place practices. Use with adequate ventilation. Keep  
containers closed when not in use. Always open containers slowly to allow any   
excess pressure to vent. Avoid breathing vapor. Avoid contact with eyes, skin or
clothing. Wash thoroughly with soap and water after handling. Decontaminate
clothing thoroughly before re-use. Destroy contaminated leather clothing. Empty 
containers may contain residues from the product. Treat empty containers with
same precautions as the material last contained. Do not cut, weld or apply heat
empty containers Do not incinerate.                                             
Hygiene Measures:                                                               

7.2.  Conditions for Safe Storage, Including Any Incompatibilities
Technical Measures:                                                             
Storage Conditions: Store in a cool, dry area, away form heat or direct
Keep containers closed when not in use. Do not store with incompatible

7.3.  Specific End Use(s)


8.1.  Control Parameters
Exposure guidelines:                                                            
CAS #                                                                           
Exposure Limits                                                                 
OSHA (TWA) 4 00 ppm                                                             
ACGIH (TWA)  400 ppm                                                            
OSHA (TWA) 200 ppm                                                              
ACGIH (TLV) 20 ppm                                                              
ACGIH (TLV) 10 mg/m3                                                            
Inhalable particles                                                             
Carbon Dioxide                                                                  
.1-10 %                                                                         
OSHA (PEL) 5000 ppm                                                             
ACGIH (TLV_TWA) 5000 ppm                                                        

8.2.  Exposure Controls
Appropriate Engineering      |General or dilution ventilation is frequently     
Controls                     |sufficient as the sole means of controlling
                             |exposure. Local ventilation is usually preferred. 
                             |Use a NIOSH approved respirato if ventilation is
                             |adequate to maintain exposures below TLV levels.  
Personal Protective Equipment|We. take no responsibility for determining what   
                             |measures are required for personal protection in
                             |specific application. The general information
                             |be used with discretion.                          
                             |Use synthetic gloves if necessary to prevent      
                             |excessive skin contact. Do not wear contacts and  
                             |always use ANSI approved safety glasses or splash 
Materials for Protective     |                                                  
Clothing                     |                                                  
Hand Protection              |                                                  
Eye Protection               |Eye wash station and emergency showers should be  
Skin and Body Protection     |                                                  
Respiratory Protection       |Use adequate ventilation to maintain exposure     
                             |limits. If the exposure limits of the products or 
                             |any of its components is exceeded, an approved    
                             |organic vapor mask should be used (consult your   
                             |safety equipment supplier). Above exposure levels
                             |approved self-container breathing apparatus or    
                             |airline respirator with full face-piece is
Thermal Hazard Protection    |                                                  

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES                                     

9.1.  Information on Basic Physical and Chemical Properties
Physical State                      |                                           
Appearance                          |Clear mist as dispensed from aerosol can.  
Odor                                |Clear mist as dispensed from aerosol can.  
Odor Threshold                      |                                           
pH                                  |                                           
Relative Evaporation Rate           |Ether = 1 Slower                           
(butylacetate=1)                    |                                           
Melting Point                       |                                           
Freezing Point                      |                                           
Boiling Point                       |NA                                         
Flash Point                         |Flash point of liquid portion < 30°F       
Auto-ignition Temperature           |                                           
Decomposition Temperature           |                                           
Flammability (solid, gas)           |                                           
Vapor Pressure                      |                                           
Relative Vapor Density at 20 °C     |                                           
Relative Density                    |                                           
Specific Gravity                    |<1                                         
Solubility                          |Negligible                                 
Partition coefficient:              |                                           
n-octanol/water                     |                                           
Viscosity                           |                                           
Lower Flammable Limit               |No Information                             
Upper Flammable Limit               |No Information                             

9.2.  Other Information

SECTION 10: STABILITY AND REACTIVITY                                            

10.1      Reactivity

10.2      Chemical Stability
Heat, spark, and open flame.                                                    

10.3      Possibility of Hazardous Reactions

10.4      Conditions to Avoid
Heat, spark, and open flame                                                     

10.5      Incompatible Materials
Strong-Oxidizing Agents.                                                        

10.6      Hazardous Decomposition Products
Combustion will produce Carbon Monoxide, Carbon Dioxide and hydrocarbons.       

SECTION 11: TOXICOLOGICAL INFORMATION                                           

11.1. Information on Toxicological Effects
Acute Toxicity:                                                                 
Skin Corrosion/Irritation:                                                      
Serious Eye Damage/Irritation:                                                  
Respiratory or Skin Sensitization:                                              
Germ Cell Mutagenicity:                                                         
Carcinogenicity: Exposure of rats and mice to toluene at concentrations ranging 
from 120-1200 ppm for two years did not demonstrate evidence of carcinogenicity.
Toluene has not been listed as a carcinogen by IARC.                            
Reproductive Toxicity:                                                          
n-Heptane: No evidence of developmental toxicity was found in pregnant
animals (rats and                                                               
mice) exposed to high vapor concentrations of unleaded gasoline and petroleum   
naphthas via inhalation. A twogeneration                                        
reproductive toxicity study of vapor recovery gasoline did not adversely affect 
reproductive function or offspring survival and development.                    
Toluene: Exposure to toluene during pregnancy has demonstrated limited evidence
developmental toxicity in laboratory animals. Decreased fetal body weight and   
increased skeletal variations in both inhalation and oral studies, but only at  
doses that were maternally toxic. No fetal toxicity was seen at doses that were 
not maternally toxic. Decreased sperm counts have been observed in male rats in 
the absence of a reduction in fertility. Toluene has been reported to cause
or growth retardation in the children of solvent abusers who directly inhale    
toluene during pregnancy.                                                       
Specific Target Organ Toxicity (Single Exposure): Epidemiology studies suggest  
that chronic occupational overexposure to toluene may damage color vision.      
Subchronic and chronic inhalation studies with toluene produced kidney and liver
damage, hearing loss and central nervous system (brain) damage in laboratory    
animals. Intentional misuse by deliberate inhalation of high concentrations of  
toluene has been shown to cause liver, kidney, and central nervous system
including hearing loss and visual disturbances.                                 
Specific Target Organ Toxicity (Repeated Exposure):                             
Aspiration Hazard:                                                              
Symptoms/Injuries After Inhalation:                                             
Symptoms/Injuries After Skin Contact:                                           
Symptoms/Injuries After Eye Contact:                                            
Symptoms/Injuries After Ingestion:                                              
Chronic Symptoms:                                                               

SECTION 12: ECOLOGICAL INFORMATION                                              

12.1. Toxicity
The acute toxicity in aquatic organisms is expected to be between 10 and 100
based on component data. This material                                          
should be regarded as harmful to aquatic organisms, with the potential to cause 
long term adverse effects in the aquatic environment.                           

12.2. Persistence and Degradability
Heptane is expected to biodegrade in soil based on 100% degradation after 4 and
days in screening tests using gasoline contaminated soil and activated sewage   
sludge, respectively. Based on 100% degradation within 25 days during aerobic   
biodegradation screening tests, heptane is expected to biodegrade in natural    

12.3. Bioaccumulative Potential

12.4. Mobility in Soil

12.5. Other Adverse Effects

13.1. Waste treatment methods
Waste Disposal Recommendations: Do not puncture or burn containers. Give empty, 
leaking, or full containers to disposal service equipped to handle and dispose
aerosol (pressurized) containers. Dispose of spilled material in accordance with
state and local regulations for waste that is non-hazardous by Federal
Note that this information applies to the material as manufactured; processing, 
use, or contamination may make this information inappropriate, inaccurate, or   
Note that this handling and disposal information may also apply to empty        
containers, liners and rinsate. State or local regulations or restrictions are  
complex and may differ from federal regulations. This information is intended as
an aid to proper handling and disposal; the final responsibility for handling
disposal is with the owner of the waste. See Section 9 - Physical and Chemical  
Additional Information:                                                         

SECTION 14: TRANSPORT INFORMATION                                               

14.1 In Accordance with DOT
Proper Shipping Name |                                                          
Hazard Class         |                       |<PICTOGRAM PHRASE>                
Identification Number|                       |                                  
Label Codes          |                       |                                  
ERG Number           |                                                          

14.2 In Accordance with IMDG
Proper Shipping Name |                                                          
Hazard Class         |                                                          
Identification Number|                                                          
Label Codes          |                      |<PICTOGRAM PHRASE>                 
ntification Of The   |                      |                                   
Substance/m          |                      |                                   
EmS-No. (Fire)       |                      |                                   
EmS-No. (Spillage)   |                      |                                   

14.3 In Accordance with IATA
Proper Shipping Name |Aerosols (limited quantity)                               
Identification Number|UN 1950                |<PICTOGRAM PHRASE>                
Hazard Class         |2.1                    |                                  
Label Codes          |                       |                                  
ntification Of The   |                       |                                  
Substance/m          |                       |                                  
ERG Code (IATA)      |126                                                       

SECTION 15: REGULATORY INFORMATION                                              

15.1      US Federal Regulations
SARA 302/304: None.                                                             
Section 313: This product contains:                                             
Toluene                                               1-4%                      
SARA Section 311/312 Hazard Classes |Immediate ( x ) Delayed ( ) Fire ( x )     
                                    |Reactive ( ) Sudden Release of Pressure ( x
Toxic Substances Control Act (TSCA) |                                           

15.2      US State Regulations
California Prop 65: WARNING! This product contains a chemical known in the State
of California to cause cancer.                                                  
WARNING! This product contains a chemical known in the State of California to   
cause birth defects or other reproductive harm.                                 
All the chemicals used in this product are TSCA listed.                         
Check with your local regulators to be sure all local regulations are met.      


Revision date   |1/05/2015                                                      
Other           |This document has been prepared in accordance with the SDS     
Information     |requirements of the OSHA Hazard Communication Standard 29 CFR  
GHS Full Text Phrases:                                                          
----|                               |                                           
--  |                               |                                           
----|                               |                                           
--  |                               |                                           
----|                               |                                           
--  |                               |                                           
----|                               |                                           
--  |                               |                                           
----|                               |                                           
--  |                               |                                           

Grainger disclaimer.

The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.