Product Categories See All
Track Order Status
SDS Sheet 0065370Printer Friendly View
Safety Data Sheet Date of Issue: 28-Aug-2014 |Revision Date:22-Dec-2014 |Revision Number: 1 Imperial Supplies Part Number: 0065370 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: BRUTE LUBE CUTTING WAX CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Tapping and drilling metal 1.3. Name, Address, and Telephone of the Responsible Party Company CHAMPION CUTTING TOOL CORP 10 Madison Ave., Rockville Centre, NY 11570 Phone: 832-399-1015 1.4. Emergency Telephone Number Emergency |INFOTRAC 1-352-323-3500 (International) number |1-800-535-5053 (North America) SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) | | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) | | | | | | Signal Word (GHS-US) | Hazard Statements (GHS-US) | Precautionary Statements | (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | This product is not hazardous according to OSHA 29 CFR 1910.1200. Components not listed are not hazardous or are below reportable limits. SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: Provide this SDS to medical personnel for treatment. First-aid Measures After Inhalation: Not a normal route of exposure. If symptoms develop, move victim to fresh air. If symptoms persist, obtain medical attention. First-aid Measures After Skin Contact: Wash contact areas with soap and water. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation occurs. First-aid Measures After Eye Contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If irritation develops or persists seek medical attention. First-aid Measures After Ingestion: Do not induce vomiting without medical advice. Seek immediate medical attention/advice. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: May cause skin and eye irritation. Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed Notes to Physician: Treat symptomatically. SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames. Unsuitable Extinguishing Media: Not determined. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Not determined. Explosion Hazard: Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Protection During Firefighting: Evacuate area. Prevent runoff from fire control or dilution from entering streams, sewers, or drinking water supply. Firefighters should use standard protective equipment and in enclosed spaces, self-contained breathing apparatus(SCBA). Use water spray to cool fire exposed surfaces and to protect personnel. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions 6.3. Methods and Material for Containment and Cleaning Up For Containment: Prevent further leakage or spillage if safe to do so. Absorb or cover with dry earth, sand or other non -combustible material. Methods for Cleaning Up: Sweep up absorbed material and shovel into suitable containers for disposal. Discard any product, residue, disposable container or liner in full compliance with federal, state, and local regulations. For waste disposal, see section 13 of the SDS. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Hygiene Measures: Avoid contact with skin, eyes and clothing. After handling this product, wash hands before eating, drinking, or smoking. If contact occurs, remove contaminated clothing. If needed, take first aid action shown on section 4 of this SDS. Launder contaminated clothing before reuse. 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Keep container tightly closed and store in a cool, dry and well-ventilated place. Do not store in open or unlabeled containers. Store away from heat and open flame. Storage temperature > 40 F. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters 8.2. Exposure Controls Appropriate Engineering |Maintain eye wash fountain and quick-drench Controls |facilities in work area. Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection | Eye Protection |If contact is likely, safety glasses with side |shields are recommended. Skin and Body Protection |Impervious gloves such as neoprene or solvex can be |used. Respiratory Protection |Ensure adequate ventilation, especially in confined |areas. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Solid Appearance |Amber solid Odor |Not determined Odor Threshold |Not determined pH |Not determined Relative Evaporation Rate |< 1 (butylacetate=1) | Melting Point |77.77 Â°C / 172 Â°F Freezing Point |77.77 Â°C / 172 Â°F Boiling Point |> 371.11 Â°C / > 700 Â°F Flash Point |> 212.77 Â°C / > 415 Â°F Pensky-Martens Closed |Cup (PMCC) Auto-ignition Temperature |Not determined Decomposition Temperature |Not determined Flammability (solid, gas) |Not determined Vapor Pressure |Not determined Relative Vapor Density at 20 Â°C |< 1.0 (Air=1) Relative Density | Specific Gravity |0.85 Solubility |Nil Partition coefficient: |Not determined n-octanol/water | Viscosity |Not determined Lower Flammable Limit |Not determined Upper Flammable Limit |Not determined 9.2. Other Information SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity Not reactive under normal conditions. 10.2 Chemical Stability Stable under recommended storage conditions. 10.3 Possibility of Hazardous Reactions None under normal processing. 10.4 Conditions to Avoid Incompatible Materials. 10.5 Incompatible Materials Oxidizing agents. Strong acids. Strong bases. 10.6 Hazardous Decomposition Products Thermal decomposition and combustion are not expected to occur except under extreme conditions. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: Germ Cell Mutagenicity: Carcinogenicity: Carcinogenic potential is unknown. Reproductive Toxicity: Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Under normal conditions of intended use, this material is not expected to be an inhalation hazard. Symptoms/Injuries After Skin Contact: Prolonged contact may cause redness and irritation. Symptoms/Injuries After Eye Contact: May cause temporary irritation on eye contact. Symptoms/Injuries After Ingestion: May cause discomfort if swallowed. Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity An environmental hazard cannot be excluded in the event of unprofessional handling or disposal. 12.2. Persistence and Degradability Not determined. 12.3. Bioaccumulative Potential Not determined. 12.4. Mobility in Soil Not determined 12.5. Other Adverse Effects Not determined SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Disposal should be in accordance with applicable regional, national and local laws and regulations. Additional Information: Contaminated Packaging: Disposal should be in accordance with applicable regional, national and local laws and regulations. SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Not regulated Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |Not regulated Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name |Not regulated Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> CERCLA: This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and Reauthorization Act (SARA) (40 CFR 355). SARA 313: Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product does not contain any chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372 SARA Section 311/312 Hazard Classes |This material, as supplied, does not contain |any substances subject to the requirements of |SARA Sections 311/312 (40 CFR 370) Toxic Substances Control Act (TSCA) |Listed 15.2 US State Regulations <COMPONENT> U.S. State Right-to-Know Regulations. This product does not contain any substances regulated under applicable state right-to-know regulations SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |22-Dec-2014 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.