Product Categories See All
Track Order Status
SDS Sheet 0057560Printer Friendly View
Safety Data Sheet Date of Issue: |Revision Date: March 2, |Revision Number: A - 3 |2015 | Imperial Supplies Part Number: 0057560 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Thin liquid. Product Name: Turtle Wax Premium Scratch Repair Kit - Clear Coat Pen CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Automotive Paint - Clear. 1.3. Name, Address, and Telephone of the Responsible Party Company Turtle Wax Inc. by: Genicolor 437 rue des Monteregiennes Quebec, Qc, Canada G1C 7J7 Phone: 1(887)661-4848 1.4. Emergency Telephone Number Emergency |Phone Number: 1(887)661-4848 number |Fax Number: 1(887)661-4878 |Transportation: 1(800)424-9300 (CHEMTREC) |Medical Assistance: Call your local Poison Control Center SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Flammable | 1 Liquid | Serious Eye |2A Irritation | Skin | 1 Sensitization | Aspiration |1 Hazard | Acute Toxicity| 4 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |Flame |Health |Exclamat| | | | |hazard |ion mark| | | Signal Word (GHS-US) |Danger Hazard Statements (GHS-US) |Extremely flammable liquid and vapor. Causes serious |eye irritation. May cause an allergic skin reaction. |May be fatal if swallowed and enters airways. Vapors |and mist may be harmful. Inhaled product may cause |dizziness, headache, or nausea. Precautionary Statements |Keep away from heat, sparks, hot surfaces, and open (GHS-US) |flames. No smoking. Keep container tightly closed. |Ground container and receiving equipment. Use |explosion proof ventilation, lighting, and tools. |Protect against static charge. Avoid breathing |fumes, vapors, and spray. Wash hands thoroughly |after handling. Wear protective gloves, Keep away |from heat, sparks, hot surfaces, and open flames. No |smoking. Keep container tightly closed. Ground |container and receiving equipment. Use explosion |proof ventilation, lighting, and tools. Protect |against static charge. Avoid breathing fumes, |vapors, and spray. Wash hands thoroughly after |handling. Wear protective gloves. goggles, and |clothing. If on skin or hair, remove immediately. |Remove all clothing and launder before re-use. If |irritation occurs, get medical attention. If in |eyes, rinse thoroughly with water for 15 minutes. |Remove contact lenses if easy to do. If eye |irritation persists, get medical attention. If |swallowed, call a poison control center or a |physician immediately. Do not induce vomiting. Store |in a cool, well ventilated place. Dispose of in |accordance with local, state, and federal |regulations. 2.3. Other Hazards Other Hazards Not Contributing to the Classification: None. 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Cellulose Acetate Butyrate |9004-36-8 |1-5% | Glycol Dibenzoate Ester |27138-31-4 |3-7% | N-Butyl Alcohol |71-36-3 |3-7% | Acetone |67-64-1 |15-40% | Methyl Ethyl Ketone |78-93-3 |1-5% | Methyl Isoamyl Ketone |110-12-3 |3-7% | Toluene |108-88-3 |7-13% | Isopropyl Alcohol |67-63-0 |10-30% | Propylene Glycol Monomethyl |108-65-6 |10-30% | Ether Acetate | | | Heptane |142-82-5 |15-40% | Ethylbenzene |100-41-1 |0.1-1.0%| Xylene |1330-20-7 |0.5-1.5%| Acrylic Polymer |25852-37-3 |7-13% | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: Remove to fresh air and promote deep breathing. Get medical attention if effects persist. First-aid Measures After Skin Contact: In case of skin contact, wash thoroughly with soap and water. Remove contaminated clothing and launder before re-use. If irritation or allergic reaction occurs, get medical attention. First-aid Measures After Eye Contact: In case of eye contact, immediately flush eyes with plenty of water. Remove contact lenses if worn. If irritation persists, get medical attention. First-aid Measures After Ingestion: If swallowed, do not induce vomiting. Never give anything by mouth to an unconscious person. Call a poison control center or physician immediately. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Vapor may be harmful. May cause respiratory tract irritation. May cause dizziness, headache, and nausea. Symptoms/Injuries After Skin Contact: May cause skin irritation and sensitization. Contact may cause redness, drying, de-fatting, and cracking of the skin. Contact may cause sensitization by skin contact. Symptoms/Injuries After Eye Contact: Cause serious eye irritation. Symptoms may include discomfort, excess blinking, and tearing, with redness and conjunctiva. Symptoms/Injuries After Ingestion: May be fatal if swallowed and enters airways. This product may be aspirated into the lungs and cause chemical pneumonitis. May cause stomach distress, nausea, and vomiting. Contact a physician if product is ingested. Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed Symptoms may not appear immediately. Seek medical attention if effects persist and you feel unwell. SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Carbon dioxide, dry chemical, and alcohol foam. Unsuitable Extinguishing Media: 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: CO2, CO, and hydrocarbons. Explosion Hazard: Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Keep up wind of fire. Firefighting Instructions: Protection During Firefighting: Wear full firefighting turn out gear (full bunker gear) and respiratory protection (SCBA). See Section 8 for personal protection. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to unnecessary and unprotected personnel. 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions 6.3. Methods and Material for Containment and Cleaning Up For Containment: Contain and absorb spill with inert material. Place in suitable container for disposal. Spilled material may be slippery. Do not allow to enter sewer or run-off. Methods for Cleaning Up: Take up material and place in a suitable container. Provide adequate ventilation. Spilled material may be slippery. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Avoid contact with skin and eyes. Do not swallow. Do not eat, drink or smoke while handling. Wash hands with soap and water after handling. Launder all clothing and foot wear before re-use. Use only non-sparking tools. Keep away from sparks, open flames, and hot surfaces. Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Keep out of reach of children. Storage Conditions: Keep container tightly closed. Store in a well ventilated place. Do not store above 49Â°C (120Â°F). 7.3. Specific End Use(s) Shelf Life: Shelf life is considered to be 7 - 10 years when properly stored and kept closed. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Exposure Limits 8 hr TWA: (OSHA PEL) (ACGIH TWA) N-Butyl Alcohol 100 ppm 20 ppm Acetone 1000 ppm 500 ppm Methyl Ethyl Ketone 200 ppm 200 ppm Methyl Isoamyl Ketone None 20 ppm Toluene 300 ppm 20 ppm Heptane 500 ppm 500 ppm Ethylbenzene 100 ppm 20 ppm Xylene 100 ppm 100 ppm Acrylic Polymer 8.2. Exposure Controls Appropriate Engineering |Use adequate ventilation to keep exposure below Controls |recommended limits. Ensure that eye wash station and |safety shower are close to work station. Use only |spark resistant tools, and equipment. Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection |Wear chemical resistant gloves and clothing to |prevent skin contact. Eye Protection |Wear safety glasses or splash goggles to prevent eye |contact. Skin and Body Protection |Wear suitable protective clothing. Respiratory Protection |Provide good ventilation. Thermal Hazard Protection |Ingestion Protection Requirements: Do not eat, drink |or smoke while handling. Wash hands with soap and |water after handling. Launder all clothing and foot |wear before reuse. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State | Appearance | Odor |Typical aromatic solvent Odor Threshold |Not available pH |Not applicable (solvent based paint) Relative Evaporation Rate |Slower than ether (butylacetate=1) | Melting Point |-134Â°C (209Â°F) Freezing Point |-134Â°C (209Â°F) Boiling Point |82Â°C (180Â°F) Flash Point |<-7Â°C (<19Â°F) (Seta Closed Cup) Auto-ignition Temperature |246Â°C (480Â°F) Decomposition Temperature | Flammability (solid, gas) |Not applicable Vapor Pressure |247 hPa @ 20Â°C (68Â°F) Relative Vapor Density at 20 Â°C |2.0 Relative Density | Specific Gravity |0.850 Solubility |in Water: Insoluble Partition coefficient: |Not available n-octanol/water | Viscosity |1200 cP Lower Flammable Limit |1.0% Upper Flammable Limit |12.8% 9.2. Other Information %NVM by Weight: 15.0% %VOC Content (California): 27.0% SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity Does not react under normal conditions. 10.2 Chemical Stability Stable. 10.3 Possibility of Hazardous Reactions Does not react under normal conditions. 10.4 Conditions to Avoid Heat and incompatible materials. 10.5 Incompatible Materials Strong oxidizers such as bleach and peroxides. 10.6 Hazardous Decomposition Products CO2, CO and hydrocarbons. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Skin Corrosion/Irritation: Based on available data, classification data are not met. Serious Eye Damage/Irritation: Causes serious eye irritation. Respiratory or Skin Sensitization: May cause an allergic skin reaction. Germ Cell Mutagenicity: Based on available data, classification data are not met. Carcinogenicity: Based on available data, classification data are not met. Reproductive Toxicity: Based on available data, classification data are not met. Specific Target Organ Toxicity (Single Exposure): Based on available data, classification data are not met. Specific Target Organ Toxicity (Repeated Exposure): Based on available data, classification data are not met. Aspiration Hazard: May be fatal if swallowed and enters airways. Symptoms/Injuries After Inhalation: May cause respiratory tract irritation, dizziness, headache, and nausea. Symptoms/Injuries After Skin Contact: May cause skin irritation. Contact may cause redness, drying, de-fatting, and cracking of the skin. Contact may cause sensitization by skin contact for susceptible people. Symptoms/Injuries After Eye Contact: Cause serious eye irritation. Symptoms may include discomfort, excess blinking, and tearing, with redness and conjunctiva. Symptoms/Injuries After Ingestion: May be fatal if swallowed and enters airways. This product may be aspirated into the lungs and cause chemical pneumonitis. May cause stomach distress, nausea, and vomiting. Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity Not recommended for release into aquatic systems without treatment. 12.2. Persistence and Degradability Not established. 12.3. Bioaccumulative Potential Not established. 12.4. Mobility in Soil Not established. 12.5. Other Adverse Effects None known. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: RCRA Hazardous Waste: Regulated as a RCRA Hazardous waste - D001 ignitable. Waste Disposal Method: Dispose of in accordance with local, state and federal regulations. Waste Disposal Vessel: Metal drums or containers, only. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name | Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name | Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name | Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> SARA Section 311/312 Hazard Classes | Toxic Substances Control Act (TSCA) |All ingredients are commercially available |and listed by the manufacturer under TSCA. 15.2 US State Regulations State Regulatory Information: The following chemicals are specifically listed by individual states; other product specific health and safety data in other sections of the SDS may also be applicable for state requirements. For details on your regulatory requirements, contact the appropriate agency in your state. California Prop 65: CAS Number Concentration State Code Ethyl Benzene (100-41-4) 0.1 - 1.0% Cancer Toluene (108-88-3) 7 - 13% Developmental SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |March 2, 2015 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.