Product Categories See All
Track Order Status
SDS Sheet 0057410Printer Friendly View
Safety Data Sheet | | Date of Issue: |Revision Date: 8/05/2015 |Revision Number: Imperial Supplies Part Number: 0057410 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: Universal Spill Kits CAS No: Synonyms: SKA-PP, SKH-SRP, SKA-30, SKA-65W, SKH30-R, SC-CART-UF, SKA-PP-TAA, SKA-BKT, SKA-30-TAA, SKH-65W, SKA55-R, SC-CART-HF, SKH-PP, SKA-BKT-TAA, SKH-30, SKA-95, SKH55-R, SC-CABINET-UF, SKA-ATK, SKH-BKT, SKA-55, SKH-95, SKA65-R, SC-CABINET-HF, SKA-ATK-TAA, SKA-20-RESCUE, SKA-55-TAA, SKA-95W, SKH65-R, SKA-K2, SKH-ATK, SKH-20-RESCUE, SKH-55, SKH-95W, SKA95-R, SKH-K2, SKA-CFB, SKA-20, SKA-55W, SKA-LT, SKH95-R, SKA-K2R, SKH-CFB, SKA-20-TAA, SKH-55W, SKH-LT, SKALT-R, SKH-K2R, SKA-SAK, SKH-20, SKA-65, SKA-XLT, SKHLT-R, SCA-PRA, SKH-SAK, SKA-20, SKA-65-TAA, SKH-XLT, SKAXLT-R, SORCSKF45, SKA-SRP, SKH-20, SKH-65, SKA30-R, SKHXLT-R, SORCFB-AC, SORSKA20, SORSKA30, SORSKA95R, SORSKA-CFB, SORSKA-K2, SORSKA-XLT, SORSK-CAMO, SORSKH20, SORSKH-K2, SORSKH-XLT, SKA-BKT/PVT 1.2. Intended Use of the Product Use of the substance/mixture: Recommended Use: Absorbent. Restrictions On Use: Not to be used for anything other than recommended use. 1.3. Name, Address, and Telephone of the Responsible Party Company: Brady SPC 7201 National Turnpike Louisville, KY 40214 Phone: 502-380-4080 Supplier: Imperial Supplies LLC 1.4. Emergency Telephone Number Emergency |800-333-7672 number |32 14 32 18 55 SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Acute Toxicity|N/C (Oral) | Acute Toxicity|N/C (Dermal) | Acute Toxicity|N/C (Inhalation) | Skin |N/C Corrosion/Irri| tation | Eye |N/C Damage/Irritat| ion | Respiratory |N/C Sensitization | Skin |N/C Sensitization | Germ Cell |N/C Mutagenicity | Carcinogenicit|N/C y | Reproductive |N/C Toxicity | Specific |N/C Target Organ | Toxicity | Single-Exposur| e | Specific |N/C Target Organ | Toxicity | Repeated or | Prolonged | Exposure | Aspiration |N/C Hazard | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) | | | | | | Signal Word (GHS-US) | Hazard Statements (GHS-US) | Precautionary Statements | (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: None identified. 2.4. Unknown Acute Toxicity (GHS-US) <1% of this mixture consists of ingredients of unknown dermal and inhalational toxicity. Medical conditions which are generally recognized as being aggravated by exposure: This product is not dangerous in its unused form and contains no hazardous ingredients. There are no risks to general population. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) POLYPROPYLENE |9003-07-0 |99% | PROPRIETARY SURFACTANT |Proprietary |<1.0% | | | | | | | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: Not Applicable. First-aid Measures After Inhalation: Not Applicable. First-aid Measures After Skin Contact: Not Applicable; Product is inert. If product is melted, use gloves. For hot melted product, immerse of flush affected area with water to dissipate heat and obtain medical attention. First-aid Measures After Eye Contact: Not Applicable. First-aid Measures After Ingestion: Not Applicable. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Acute: None. Delayed: None. Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed Not Applicable. Notes to physician: Not Applicable. SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Water spray. Unsuitable Extinguishing Media: None identified. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: None identified. Explosion Hazard: Flash point: > 600 Â°F; 315 Â°C (estimated) LFL/LEL: Not established UFL/UEL: Note established Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Be cautions of hot melted polypropylene. Isolate product from fire. Respiratory and eye protection required for firefighting personnel. Protection During Firefighting: SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: (Land): Recover material and place in suitable container for reuse or for disposal in conformance with local regulations. (Water): Recover material and place in suitable container for reuse of for disposal in conformance with local regulations. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: No precautions noted - see local regulation is needed. Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Keep products in ambient conditions away from direct sunlight and at atmospheric pressures. Direct sunlight will degrade the polypropylene after a period of 9 months. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters 8.2. Exposure Controls Appropriate Engineering | Controls | Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection |Not Applicable Eye Protection |Not Applicable Skin and Body Protection |Not Applicable Respiratory Protection |Not Applicable Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Solid pads, rolls, pillows, booms, drum top |covers, particulate Appearance | Odor |Mild Hydrocarbon Odor Threshold |Not Applicable pH |Not Applicable Relative Evaporation Rate (butyl |Not Applicable acetate=1) | Melting Point |320 Â°F; 160 Â°C Freezing Point |320 Â°F; 160 Â°C Boiling Point |Not Applicable Flash Point |>600 Â°F; 315 Â°C (estimated) Auto-ignition Temperature |>600 Â°F; 315 Â°C (estimated) Decomposition Temperature |Not Applicable Flammability (solid, gas) |Not Applicable Vapor Pressure |Not Applicable Relative Vapor Density at 20 Â°C |Not Applicable Relative Density |0.04-0.06 gram/cc Specific Gravity |Not Applicable Solubility |Not Applicable Partition coefficient: |Not Applicable n-octanol/water | Viscosity |Not Applicable Lower Flammable Limit |Not Applicable Upper Flammable Limit |Not Applicable 9.2. Other Information SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity No data available. 10.2 Chemical Stability Material is stable under normal conditions. 10.3 Possibility of Hazardous Reactions Hazardous polymerization will not occur. 10.4 Conditions to Avoid Higher temperatures and direct sunlight. Temperatures over 480 ÂºF may cause degradation. 10.5 Incompatible Materials No data available. 10.6 Hazardous Decomposition Products Will not occur. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: Germ Cell Mutagenicity: Carcinogenicity: Reproductive Toxicity: Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Product is inert - no exposure. Symptoms/Injuries After Skin Contact: Product is inert - no exposure. Symptoms/Injuries After Eye Contact: Product is inert - no exposure. Symptoms/Injuries After Ingestion: Product is inert - no exposure. Chronic Symptoms: None. SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity Data not available. 12.2. Persistence and Degradability 12.3. Bioaccumulative Potential 12.4. Mobility in Soil 12.5. Other Adverse Effects ENVIRONMENTAL FATE: Data not available. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Dispose waste in accordance with the federal, state, and local laws and regulations. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |This Product is not regulated. Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |This Product is not regulated. Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name |This Product is not regulated. Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations This product is an "Article" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. SARA Section 311/312 Hazard Classes |Acute Health: No |Chronic Health: No |Fire Hazard: No |Pressure Hazard: No |Reactive Hazard: No Toxic Substances Control Act (TSCA) | 15.2 US State Regulations US EPCRA (SARA Title III) Section 313- No information available. CERCLA (Superfund) reportable quantity (lbs.): No information available. California Proposition 65: This product is not subject to the reporting requirements under California Proposition 65. National Chemical Inventories: All components are either listed on the US TSCA Inventory, or are not regulated under TSCA. All components are either on the DSL, or are exempt from DSL listing requirements. SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |8/5/2015 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.