Product Categories See All
Track Order Status
SDS Sheet 0055620Printer Friendly View
SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Mixture Product Name: JOHNSEN'S PREMIUM ESTER WITH UV DYE 8 FL.OZ. CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Lubricant 1.3. Name, Address, and Telephone of the Responsible Party Company: Technical Chemical Company P.O. BOX 139 Cleburne, Texas 76033 Phone: 817-645-6088 1.4. Emergency Telephone Number Emergency | CHEMTREC 24 Hour 1-800-424-9300, 1-703-527-3887 (International) number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Not classified| | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |None Signal Word (GHS-US) |Warning Hazard Statements (GHS-US) |None Precautionary Statements |None (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: None under normal conditions. 2.4. Unknown Acute Toxicity (GHS-US) No data available SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Ester |Proprietary |70 - 85 |Not classified Proprietary Inhibitor Package |Proprietary |10 - 30 |Not classified Lubricant Oil for UV Dye |NJ TSRN |0.054 |Not classified |80100023-5002P |-0.072 | Fluorescent Dye |NJ EIN 80100312-5004P|0.018 |Not classified | |-0.036 | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). First-aid Measures After Inhalation: Assure fresh air breathing. Allow the victim to rest. First-aid Measures After Skin Contact: Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. First-aid Measures After Eye Contact: Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persist. First-aid Measures After Ingestion: Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: If you feel unwell, seek medical advice. Not expected to present a significant hazard under anticipated conditions of normal use. Symptoms/Injuries After Inhalation: May cause respiratory irritation. Symptoms/Injuries After Skin Contact: May cause slight irritation . May cause moderate irritation. Itching. Red skin. Symptoms/Injuries After Eye Contact: May cause slight eye irritation . Irritation of the eye tissue. Inflammation/damage of the eye tissue. Redness of the eye tissue. Symptoms/Injuries After Ingestion: May be harmful if swallowed and enters airways. Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed No additional information available SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Foam. Dry powder. Carbon dioxide. Water spray. Sand. Unsuitable Extinguishing Media: Do not use a heavy water stream. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Explosion Hazard: Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment. Protection During Firefighting: Do not enter fire area without proper protective equipment, including respiratory protection. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: Remove ignition sources. 6.1.1. For Non-emergency Personnel Protective Equipment: Gloves. Safety glasses. Emergency Procedures: Evacuate unnecessary personnel. 6.1.2. For Emergency Responders Protective Equipment: Equip cleanup crew with proper protection. Emergency Procedures: Ventilate area. 6.2. Environmental Precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters. 6.3. Methods and Material for Containment and Cleaning Up For Containment: Dam up the liquid spill. Plug the leak, cut off the supply. Contain released substance, pump into suitable containers. Methods for Cleaning Up: Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapor. Hygiene Measures: Do not eat, drink or smoke when using this product. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Wash affected areas thoroughly after handling. Wash contaminated clothing before reuse. 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Proper grounding procedures to avoid static electricity should be followed. Comply with applicable regulations. Storage Conditions: Keep only in the original container in a cool, well ventilated place away from : Keep container closed when not in use. 7.3. Specific End Use(s) Follow Label Directions. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Lubricant Oil for UV Dye (NJ TSRN 80100023-5002P) USA ACGIH ACGIH TWA (mg/mÂ³) 5 mg/mÂ³ 8 HR USA ACGIH ACGIH STEL (mg/mÂ³) 10 mg/mÂ³ USA OSHA OSHA PEL (TWA) (mg/mÂ³) 5 mg/mÂ³ 8 HR 8.2. Exposure Controls Appropriate Engineering |Local exhaust venilation, vent hoods. Controls | Personal Protective Equipment|Gloves. Safety glasses. Avoid all unnecessary |exposure. Materials for Protective | Clothing | Hand Protection |Wear protective gloves. Eye Protection |Chemical goggles or safety glasses. Skin and Body Protection |Wear suitable protective clothing. Respiratory Protection |Wear appropriate mask. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Liquid Appearance |Liquid. Odor |Characteristic. Petroleum-like odour. Odor Threshold |No data available pH |No data available Relative Evaporation Rate |No data available (butylacetate=1) | Melting Point |No data available Freezing Point |No data available Boiling Point |No data available Flash Point |> 245 Â°C Auto-ignition Temperature |No data available Decomposition Temperature |No data available Flammability (solid, gas) |No data available Vapor Pressure |No data available Relative Vapor Density at 20 Â°C |No data available Relative Density |0.995 Specific Gravity | Solubility |Poorly soluble in water. Partition coefficient: | n-octanol/water | Viscosity |Viscosity, kinematic: 95 - 105 cSt @ 40 deg C | |Viscosity, dynamic: No data available Lower Flammable Limit | Upper Flammable Limit | 9.2. Other Information VOC content: 0 % SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity No additional information available 10.2 Chemical Stability Not established. 10.3 Possibility of Hazardous Reactions Not established. 10.4 Conditions to Avoid Direct sunlight. Extremely high or low temperatures. 10.5 Incompatible Materials Strong acids. Strong bases. 10.6 Hazardous Decomposition Products Toxic fume. . Carbon monoxide. Carbon dioxide. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Not classified Skin Corrosion/Irritation: Not classified Serious Eye Damage/Irritation: Not classified Respiratory or Skin Sensitization: Not classified Germ Cell Mutagenicity: Not classified Carcinogenicity: Not classified Reproductive Toxicity: Not classified Specific Target Organ Toxicity (Single Exposure): Not classified Specific Target Organ Toxicity (Repeated Exposure): Not classified Aspiration Hazard: Not classified Symptoms/Injuries After Inhalation: May cause respiratory irritation. Symptoms/Injuries After Skin Contact: May cause slight irritation . May cause moderate irritation. Itching. Red skin. Symptoms/Injuries After Eye Contact: May cause slight eye irritation . Irritation of the eye tissue. Inflammation/damage of the eye tissue. Redness of the eye tissue. Symptoms/Injuries After Ingestion: May be harmful if swallowed and enters airways. Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity No additional information available 12.2. Persistence and Degradability JOHNSEN'S PREMIUM ESTER WITH UV DYE 8 FL.OZ. Persistence and degradability Not established. Ester (Proprietary) Persistence and degradability Not established. Proprietary Inhibitor Package (Proprietary) Persistence and degradability Not established. Lubricant Oil for UV Dye (NJ TSRN 80100023-5002P) Persistence and degradability Not established. Fluorescent Dye (NJ EIN 80100312-5004P) Persistence and degradability Not established. 12.3. Bioaccumulative Potential JOHNSEN'S PREMIUM ESTER WITH UV DYE 8 FL.OZ. Bioaccumulative potential Not established. Ester (Proprietary) Bioaccumulative potential Not established. Proprietary Inhibitor Package (Proprietary) Bioaccumulative potential Not established. Lubricant Oil for UV Dye (NJ TSRN 80100023-5002P) Bioaccumulative potential Not established. Fluorescent Dye (NJ EIN 80100312-5004P) Bioaccumulative potential Not established. 12.4. Mobility in Soil No additional information available 12.5. Other Adverse Effects Other information: Avoid release to the environment. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Dispose of contents/container to appropriate waste disposal facility, in accordance with local, regional, national, international regulations. Dispose in a safe manner in accordance with local/national regulations. Additional Information: Ecology - waste materials: Avoid release to the environment. SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Not regulated Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |Not regulated Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name |Not regulated Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> SARA Section 311/312 Hazard Classes |JOHNSEN'S PREMIUM ESTER WITH UV DYE 8 FL.OZ. |Immediate (acute) health hazard Toxic Substances Control Act (TSCA) | 15.2 US State Regulations <COMPONENT> No additional information available SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |09/19/2014 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.