Product Categories See All
Track Order Status
SDS Sheet 0055310Printer Friendly View
Safety Data Sheet | | Date of Issue: |Revision Date: 05/28/2015 |Revision Number: Imperial Supplies Part Number: 0055310 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: Fuel Power CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Fuel system treatment No restrictions on use known. 1.3. Name, Address, and Telephone of the Responsible Party Company: FPPF Chemical Company, Inc. 117 West Tupper Street Buffalo, NY, USA 14201 Phone: 1-800-735-3773 Supplier: Imperial Supplies LLC 1.4. Emergency Telephone Number Emergency |1-800-424-9300 (Within Continental U.S.); Chemtrec 703-527-3887 number |(Outside U.S.) SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Flammable |Category 4 Liquid | Acute |Category 4 Toxicity, oral| Acute |Category 3 Toxicity, | dermal | Acute |Category 3 Toxicity, | inhalation | (vapor) | Skin |Category 2 Corrosion/Irri| tation | Serious eye |Category 2A damage/eye | irritation | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |Skulls |Exclamat| | | | |and |ion mark| | | | |crossbon| | | | | |es | | | | | Signal Word (GHS-US) |DANGER! Hazard Statements (GHS-US) |Combustible liquid and vapor. |Harmful if swallowed. |Toxic if inhaled. |Toxic in contact with skin. |Causes skin irritation. |Causes serious eye irritation. Precautionary Statements |Keep away from flames and hot surfaces. - No (GHS-US) |smoking. |Use only outdoors or in a well-ventilated area. |Avoid breathing mist, vapors or spray. |Do not eat, drink or smoke when using this product. |Wear protective gloves/clothing and eye/face |protection. |Wash hands and face thoroughly after handling. |In case of fire, use water fog, dry chemical, CO2 or |'alcohol' foam. |IF SWALLOWED: Call a POISON CENTRE or |doctor/physician if you feel unwell. Rinse mouth. |IF ON SKIN: Wash with plenty of soap and water. |Call a POISON CENTRE or doctor/physician if you feel |unwell. |If skin irritation occurs, get medical |advice/attention. |Take off immediately all contaminated clothing and |wash it before reuse. |IF INHALED: Remove person to fresh air and keep |comfortable for breathing. |Call a POISON CENTRE or doctor/physician. |IF IN EYES: Rinse cautiously with water for several |minutes. Remove contact lenses, if present and easy |to do. Continue rinsing. |If eye irritation persists, get medical |advice/attention. |Store in well-ventilated place. Keep container |closed. Keep cool. Store locked up. |Dispose of contents/container in accordance with |local/regional/national/international regulations. 2.3. Other Hazards Other Hazards Not Contributing to the Classification: No OSHA defined hazard classes. Other hazards which do not result in classification: May be sensitive to static discharge. Burning produces obnoxious and toxic fumes. Ingestion can cause gastrointestinal irritation, nausea, and diarrhea. Inhalation of high vapour concentrations may cause symptoms like headache, dizziness, tiredness, nausea and vomiting. Prolonged or repeated contact may cause drying, cracking and defatting of the skin. Environmental precautions: Avoid release to the environment. See ECOLOGICAL INFORMATION, Section 12. 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Ethylene glycol monobutyl ether |111-76-2 |95.0 - | (EGMBE) | |100.0 | | | | | | | | | | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/physician. First-aid Measures After Skin Contact: IF ON SKIN: Wash with plenty of soap and water. Call a POISON CENTER or doctor/physician if you feel unwell. Take off immediately all contaminated clothing and wash it before reuse. If skin irritation occurs, get medical advice/attention. First-aid Measures After Eye Contact: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention. First-aid Measures After Ingestion: IF SWALLOWED: Call a POISON CENTRE or doctor/physician if you feel unwell. Rinse mouth. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Prolonged overexposure may cause slight kidney effects, such as increased organ weight. Prolonged or repeated contact may cause drying, cracking and defatting of the skin. Chronic overexposure to 2-butoxyethanol may cause liver, kidney and blood damage, based on animal data. Symptoms/Injuries After Inhalation: Toxic if inhaled. Symptoms may include coughing, choking and wheezing. May cause respiratory impairment and lung damage. Symptoms/Injuries After Skin Contact: Toxic in contact with skin. May be absorbed through the skin, producing symptoms similar to ingestion or inhalation. Causes skin irritation. Contact may cause redness, swelling and a painful sensation. Symptoms/Injuries After Eye Contact: Causes serious eye irritation. Symptoms may include redness, pain, tearing and conjunctivitis. Symptoms/Injuries After Ingestion: Harmful if swallowed. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. Symptoms may include severe abdominal pain, nausea and vomiting. Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed Provide general supportive measures and treat symptomatically. Show this safety data sheet to the doctor in attendance. Medical conditions aggravated by overexposure: Pre-existing skin, eye, respiratory and central nervous system disorders. SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Dry chemical, foam, carbon dioxide and water fog. Unsuitable Extinguishing Media: Do not use water stream as it may scatter and spread fire. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Combustible liquid and vapor. Keep away from flames and hot surfaces. Vapours are heavier than air and collect in confined and low-lying areas. Material will float on water and can be re-ignited at the water's surface. Vapors may travel considerable distance to a source of ignition and flash back. After prolonged storage, may release explosive peroxides in the presence of air. Rate of peroxide formation is not known. This product will accumulate static charge by flow, splashing or agitation. Closed containers may rupture if exposed to excess heat or flame due to a build-up of internal pressure. Explosion Hazard: Hazardous combustion products: None known or reported by the manufacturer. In the event of fire the following can be released: Carbon oxides; irritating fumes and smoke. Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighters must use standard protective equipment including flame retardant coat, helmet with face shield, gloves, rubber boots, and in enclosed spaces, SCBA. Firefighters should wear proper protective equipment and self-contained breathing apparatus with full face piece operated in positive pressure mode. Firefighting Instructions: Move containers from fire area if safe to do so. Use water spray to keep containers cool. Prevent runoff from fire control or dilution from entering sewers, drains, drinking water supply or any natural waterway. Dike for water control. Protection During Firefighting: Firefighters must use standard protective equipment including flame retardant coat, helmet with face shield, gloves, rubber boots, and in enclosed spaces, SCBA. Firefighters should wear proper protective equipment and self-contained breathing apparatus with full face piece operated in positive pressure mode. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: Evacuate personnel to safe areas. Keep all other personnel upwind and away from the spill/release. All persons dealing with clean-up should wear the appropriate protective equipment including self-contained breathing apparatus. Restrict access to area until completion of clean-up. Refer to protective measures listed in sections 7 and 8. 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions Ensure spilled product does not enter drains, sewers, waterways, or confined spaces. If necessary, dike well ahead of the spill to prevent runoff into drains, sewers, or any natural waterway or drinking supply. 6.3. Methods and Material for Containment and Cleaning Up For Containment: Ventilate the area. Remove all sources of ignition. Prevent further leakage or spillage if safe to do so. Use only non-sparking tools. Bond and ground transfer containers and equipment to avoid static accumulation. For spilled liquids: absorb spill with inert, non-combustible material such as sand, then place into suitable containers. Do not use combustible absorbents, such as sawdust. Pick up and transfer to properly labelled containers. Contaminated absorbent material may pose the same hazards as the spilled product. Contact the proper local authorities. Methods for Cleaning Up: In case of a transportation accident, in the United States contact CHEMTREC at 1-800-424-9300 or International at 1-703-527-3887. If a spill/release in excess of the EPA reportable quantity is made into the environment, immediately notify the national response center in the United States (phone: 1-800-424-8802). US CERCLA Reportable quantity (RQ): None. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Keep away from flames and hot surfaces. - No smoking. Use only outdoors or in a well-ventilated area. Wear protective gloves/clothing and eye/face protection. Avoid breathing mist or spray. Take precautionary measures against static discharges. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Do not ingest. Do not get in eyes, on skin, or on clothing. Use proper bonding and grounding techniques when transferring liquid. Avoid contact with incompatible materials. Hygiene Measures: Avoid breathing mist or spray. Do not eat, drink, smoke or use cosmetics while working with this product. Wash thoroughly after handling. Do not get in eyes, on skin, or on clothing. Remove and wash contaminated clothing before re-use. Handle in accordance with good industrial hygiene and safety practice. 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Store in well-ventilated place. Keep cool. Keep tightly closed. Store locked up. Store away from incompatibles and out of direct sunlight. Take measures to prevent the build up of electrostatic charge. After prolonged storage, may release explosive peroxides in the presence of air. Rate of peroxide formation is not known. Direct sunlight or heat may accelerate the release of peroxides. Storage area should be clearly identified, clear of obstruction and accessible only to trained and authorized personnel. Inspect periodically for damage or leaks. No smoking in the area. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Chemical Name ACGIH TLV OSHA PEL Ethylene glycol monobutyl ether (EGMBE) TWA STEL 20 ppm N/Av PEL STEL 50 ppm (skin) N/Av 8.2. Exposure Controls Appropriate Engineering |Use only outdoors or in a well-ventilated area. Controls |Apply technical measures to comply with the |occupational exposure limits. Where reasonably |practicable this should be achieved by the use of |local exhaust ventilation and good general |extraction. Use non-sparking equipment. In case of |insufficient ventilation wear suitable respiratory |equipment. Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection |Other protective equipment: Ensure that eyewash |stations and safety showers are close to the |workstation location. Other equipment may be |required depending on workplace standards. Eye Protection |Wear eye/face protection. Chemical splash goggles |are recommended. A full face |shield may also be necessary. Skin and Body Protection |Wear protective gloves/clothing. Where extensive |exposure to product is possible, use resistant |coveralls, apron and boots to prevent contact. The |suitability for a specific workplace should be |discussed with the producers of the protective |gloves. Respiratory Protection |If engineering controls and work practices are not |effective in controlling exposure to this material, |then wear suitable approved respiratory protection. |If the TLV is exceeded, a NIOSH/MSHA-approved |respirator is advised. Respirators should be |selected based on the form and concentration of |contaminants in air, and in accordance with OSHA (29 |CFR 1910.134) or CSA Z94.4-02. Confirmation of which |type of respirator is most suitable for the intended |application should be obtained from respiratory |protection suppliers. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Liquid. Appearance |Clear to slightly hazy amber liquid. Odor |Solvent odor. Odor Threshold |N/Av pH |N/Av Relative Evaporation Rate |Slower than n-butyl acetate (BuAe = 1) (butylacetate=1) | Melting Point |-102.64Â°F (-74.8Â°C) estimated Freezing Point |N/Av Boiling Point |>334.4Â°F (>168Â°C) estimated Flash Point |67.8Â°C / 154Â°F Tag closed cup Auto-ignition Temperature |460.4Â°F (238Â°C) estimated Decomposition Temperature |N/Av Flammability (solid, gas) |N/Ap Vapor Pressure |0.6 mm Hg Relative Vapor Density at 20 Â°C |>1 Relative Density |0.89 Specific Gravity |0.89 Solubility |soluble Partition coefficient: | n-octanol/water | Viscosity | Lower Flammable Limit |1.1% Upper Flammable Limit |10.6% 9.2. Other Information Volatile organic Compounds (VOC's) 100%estimated Absolute pressure of container: N/Ap Flame projection length: N/Av Other physical/chemical comments: None known or reported by the manufacturer. SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity Not normally reactive. 10.2 Chemical Stability Stable under normal conditions. 10.3 Possibility of Hazardous Reactions Hazardous polymerization does not occur. May form explosive peroxides during prolonged exposure to air and heat. May be sensitive to static discharge. 10.4 Conditions to Avoid Keep away from flames and hot surfaces. Keep away from direct sunlight. Do not use in areas without adequate ventilation. Take precautionary measures against static discharge. Avoid contact with incompatible materials. 10.5 Incompatible Materials Strong oxidizing agents, Perchloric acid, Bases. 10.6 Hazardous Decomposition Products May form explosive peroxides. Exposure to light may accelerate peroxide formation. None known, refer to hazardous combustion products in Section 5. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: There is no available data for the product itself, only for the ingredients. See below for individual ingredient acute toxicity data. Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: Not expected to be a skin or respiratory sensitizer. Germ Cell Mutagenicity: Not expected to be mutagenic in humans. Carcinogenicity: Not expected to have carcinogenic effect. Reproductive Toxicity: This product is not expected to cause reproductive or developmental effects. Specific Target Organ Toxicity (Single Exposure): The substance or mixture is not classified as specific target organ toxicant, single exposure. Specific Target Organ Toxicity (Repeated Exposure): The substance or mixture is not classified as specific target organ toxicant, repeated exposure. Aspiration Hazard: Symptoms/Injuries After Inhalation: Toxic if inhaled. Symptoms may include pain, headache, nausea, vomiting, dizziness,drowsiness and other central nervous system effects. Inhalation of vapors or mists may cause irritation to the nose, throat and upper respiratory tract. Symptoms may include coughing, choking and wheezing. Symptoms/Injuries After Skin Contact: Toxic in contact with skin. May be absorbed through the skin, producing symptoms similar to ingestion or inhalation. Causes skin irritation. Symptoms include: Dryness, itching, cracking, burning, redness and swelling. Symptoms/Injuries After Eye Contact: Causes serious eye irritation. Symptoms may include redness, pain, tearing and conjunctivitis. Symptoms/Injuries After Ingestion: Harmful if swallowed. Ingestion may cause symptoms similar to inhalation. Symptoms may include pain, headache, nausea, vomiting, dizziness, drowsiness and other central nervous system effects. Ingestion may irritate digestive tract and cause nausea, vomiting and diarrhea. Chronic Symptoms: Prolonged or repeated contact may cause drying, cracking and defatting of the skin. Chronic overexposure to 2-butoxyethanol may cause liver, kidney and blood damage. Prolonged overexposure may cause slight kidney effects, such as increased organ weight. SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity No data is available on the product itself. See the following tables for individual ingredient ecotoxicity data. 12.2. Persistence and Degradability The following ingredients are considered to be readily biodegradable: Ethylene glycol monobutyl ether. 12.3. Bioaccumulative Potential No data is available on the product itself. See the following data for ingredient information. 12.4. Mobility in Soil No data is available on the product itself. 12.5. Other Adverse Effects The ecological characteristics of this product have not been fully investigated. The product should not be allowed to enter drains or water courses, or be deposited where it can affect ground or surface waters. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Handle in accordance with good industrial hygiene and safety practice. Refer to protective measures listed in sections 7 and 8. Methods of Disposal: Dispose in accordance with all applicable regulations. Additional Information: RCRA: If this product, as supplied, becomes a waste in the United States, it may meet the criteria of a hazardous waste as defined under RCRA, Title 40 CFR 261. It is the responsibility of the waste generator to determine the proper waste identification and disposal method. For disposal of unused or waste material, check with local, state and federal environmental agencies. SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Combustible liquid, n.o.s. (Ethylene glycol monobutyl ether) Hazard Class |NA1993 |<PICTOGRAM PHRASE> Identification Number|Combustible. | Label Codes |III | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name | Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name | Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT>Components listed below are present on the following U.S. Federal chemical lists: Ingredients CAS # CERCLA Reportable Quantity(RQ) (40 CFR 117.302): SARA TITLE III: Sec. 302, Extremely Hazardous Substance, 40 CFR 355: SARA TITLE III: Sec. 313, 40 CFR 372, Specific Toxic Chemical Toxic Chemical de minimus Concentration Ethylene glycol monobutyl ether (EGMBE) 111-76-2 N/Ap N/Ap No N/Ap SARA Section 311/312 Hazard Classes |SARA TITLE III: Sec. 311 and 312, MSDS |Requirements, 40 CFR 370 Hazard Classes: Fire |Hazard; Acute Health Toxic Substances Control Act (TSCA) |Ingredients |CAS # |TSCA Inventory | |Ethylene glycol |monobutyl ether |(EGMBE) |111-76-2 |Yes | 15.2 US State Regulations <COMPONENT> Ingredients CAS # California Proposition 65 State "Right to Know" Lists Ethylene glycol monobutyl ether (EGMBE) 111-76-2 Listed Type of Toxicity No Not listed CA MA MN NJ PA RI Yes Yes Yes Yes Yes Yes SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |05/28/2015 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.