Product Categories See All
Track Order Status
SDS Sheet 0052430Printer Friendly View
Safety Data Sheet Date of Issue: May 1, 2015 |Revision Date: N/A |Revision Number: Imperial Supplies Part Number: 0052430 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Nylon Bags, Plastic Drums, Sorbent Fabrics Product Name: STARDUST Spill Kits CAS No: Synonyms: D560; STARDUST Wall Mount Spill Kit D710; STARDUST Quick Response Spill Kit D715; STARDUST Quick Response II Spill Kit D920P; STARDUST 20-Gallon Oil-Only Spill Kit D920U; STARDUST 20-Gallon Universal Spill Kit D930P; STARDUST 30-Gallon Oil-Only Spill Kit D930U; STARDUST 30-Gallon Universal Spill Kit D932PW; STARDUST 32-Gallon Oil-Only Wheeled Spill Kit D932UW; STARDUST 32-Gallon Universal Wheeled Spill Kit D950P; STARDUST 95-Gallon Catastrophic Oil-Only Wheeled Spill Kit D950U; STARDUST 95-Gallon Catastrophic Universal Wheeled Spill Kit 1.2. Intended Use of the Product Use of the substance/mixture: 1.3. Name, Address, and Telephone of the Responsible Party Company Paradigm International, Inc. 45 Mirador Irvine, CA 92162 USA Phone: 714-550-4999 1.4. Emergency Telephone Number Emergency |714-550-4999 number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) | | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |None | | | | | |required| | | | | Signal Word (GHS-US) | Hazard Statements (GHS-US) |None Precautionary Statements |None (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: None 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Polypropylene |9003-07-0 |98.3% | Surfactant |N/A |1.4% | Color dye |N/A |0.3% | | | | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: N/A First-aid Measures After Skin Contact: N/A First-aid Measures After Eye Contact: Use eyewash, or flush with water for 15 minutes consult physician if accompanied by pain or irritation. First-aid Measures After Ingestion: N/A 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Water, Foam, CO2, Dry Chemical Unsuitable Extinguishing Media: 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Explosion Hazard: Some carbon monoxide formation is possible under oxygen-lean conditions. Matting will not support combustion. Sorbents will take on the characteristics/properties of whatever liquid is absorbed. Therefore, all measures must be taken as if you were handling the liquid itself. Sorbents do not make the liquid less hazardous. Always refer to the SDS for the chemical absorbed before proceeding. Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Protection During Firefighting: Standard procedures for Class A fires. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: Spill or Leak Procedures: If material is unused, sweep or pick up and dispose of as a non-hazardous material. 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Use self-contained air masks to entersmoky area in the event of fire. Adequate ventilation is required to remove decomposition products when temperature exceeds melting point. Avoid contact with melted product. Hygiene Measures: Sorbents will take on the characteristics/properties of whatever liquid is absorbed. Therefore, all measures must be taken as if you were handling the liquid itself. Sorbents do not make the liquid less hazardous. Always refer to the SDS for the chemical absorbed before proceeding. Wash after handling, especially before eating, drinking or smoking. 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Incompatible Materials: Strong oxidizers, strong acids, strong alkalines. Storage Conditions: Store in dry area. Do not store near open flame, high heat, strong oxidants, or halogenated hydrocarbons. Polypropylene, when heated, becomes very sticky and will burn. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters 8.2. Exposure Controls Appropriate Engineering |None Required. Controls | Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection |Protective Gloves: Not required. However, use of |cloth, canvas or leather gloves is a good industrial |practice. Eye Protection |Safety glasses with side shields are recommended as |a good practice for industrial safety. Skin and Body Protection |Other Protective Equipment: None Required Respiratory Protection |None Required. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State | Appearance |Gray, White, or Yellow Odor |virtually odor free Odor Threshold | pH | Relative Evaporation Rate |N/A (butylacetate=1) | Melting Point |>160Â° C (320Â° F) Freezing Point | Boiling Point |Not Applicable Flash Point |329 Deg C (625 Deg F) (in fire fighting |measures) |625Â° C (1157Â° F) Auto-ignition Temperature | Decomposition Temperature | Flammability (solid, gas) |Â° Vapor Pressure |N/A Relative Vapor Density at 20 Â°C |N/A Relative Density | Specific Gravity |0.88 - 0.92 Solubility |Insoluble Partition coefficient: | n-octanol/water | Viscosity | Lower Flammable Limit | Upper Flammable Limit | 9.2. Other Information SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity Stable 10.2 Chemical Stability Hazardous reactions will not occur under normal conditions. 10.3 Possibility of Hazardous Reactions Hazardous Polymerization: Will not occur. 10.4 Conditions to Avoid Strong oxidizing agents may degrade product over an extended period of time. 10.5 Incompatible Materials Strong oxidizers, strong acids, strong alkalines. Strong oxidizing agents. 10.6 Hazardous Decomposition Products When heated, it may emit toxic fumes. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Products are inert. N/A Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: Germ Cell Mutagenicity: Carcinogenicity: Reproductive Toxicity: Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity 12.2. Persistence and Degradability 12.3. Bioaccumulative Potential 12.4. Mobility in Soil 12.5. Other Adverse Effects No data available. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Disposal must be done in accordance with local, state and federal regulations based on chemicals adsorbed by products. Sorbents will take on the characteristics/properties of whatever liquid is absorbed. Therefore, all measures must be taken as if you were handling the liquid itself. Sorbents do not make the liquid less hazardous. Additional Information: Always refer to the SDS for the chemical absorbed before proceeding. SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Not regulated Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |Not regulated Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name |Not regulated Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> CERCLA: This product is not subject to reporting. OSHA HAZARD COMMUNICATION STANDARD, 29 CFR 1910.1200: Not listed SECTIONS 313: Not applicable. SECTIONS 302: Not applicable. CAA (CLEAN AIR ACT): Not applicable. CWA (CLEAN WATER ACT): Not applicable. SARA Section 311/312 Hazard Classes |Not applicable Toxic Substances Control Act (TSCA) |Not regulated 15.2 US State Regulations CALIFORNIA PROPOSITION 65: Not applicable. STATE RIGHT TO KNOW LISTS: Not applicable. WHMIS: Not applicable. SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |N/A. Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.