Product Categories See All
Track Order Status
SDS Sheet 0047184Printer Friendly View
SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: TODCO FG Lube 39000.1016FG - Gallon CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Food Grade Lubricant 1.3. Name, Address, and Telephone of the Responsible Party Company TODCO OVERHEAD DOOR 1295 FAIRGROUND RD. E - MARION, OH 43302 USA Phone: (740) 383-6376 1.4. Emergency Telephone Number Emergency | 1-800-535-5053 number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Not classified| | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |None Signal Word (GHS-US) |None Hazard Statements (GHS-US) |General: |P101 - If medical advice is needed, have product |container or label at hand. |P102 - Keep out of reach of children. |P103 - Read label before use. | |Prevention: |No precautionary statement available. | |Response: |No precautionary statement available. | |Storage: |No precautionary statement available. | |Disposal: |No precautionary statement available. Precautionary Statements | (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) MINERAL OIL, SLAB OIL |0008042-47-5 |70% - | | |87% | Soybean oil, Me ester |0067784-80-9 |7% - 19%| | | | | | | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: Remove source of exposure or move person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. If breathing has stopped, trained personnel should begin rescue breathing or, if the heart has stopped, immediately start cardiopulmonary resuscitation (CPR) or automated external defibrillation(AED). First-aid Measures After Skin Contact: Take off immediately contaminated clothing. Rinse skin with water/shower for 5 minutes or until product is removed. Store contaminated clothing under water and wash before re-use or discard. First-aid Measures After Eye Contact: Remove source of exposure or move person to fresh air. Rinse eyes cautiously with lukewarm, gently flowing water for several minutes, while holding the eyelids open. Remove contact lenses, if present and easy to do. Continue rinsing for a duration of 15-20 minutes. Take care not to rinse contaminated water into the unaffected eye or onto the face. If eye irritation persists: Get medical advice/attention. First-aid Measures After Ingestion: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER/doctor. If vomiting occurs naturally, lie on your side, in the recovery position. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Dry chemical, foam, carbon dioxide water spray or fog is recommended. Water spray is recommended to cool or protect exposed materials or structures. Carbon dioxide can displace oxygen. Use caution when applying carbon dioxide in confined spaces. Simultaneous use of foam and water on the same surface is to be avoided as water destroys the foam. Sand or earth may be used for small fires only. Unsuitable Extinguishing Media: 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Explosion Hazard: Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Isolate immediate hazard area and keep unauthorized personnel out. Stop spill/release if it can be done safely. Move undamaged containers from immediate hazard area if it can be done safely. Water spray may be useful in minimizing or dispersing vapors and to protect personnel. Dispose of fire debris and contaminated extinguishing water in accordance with official regulations. Protection During Firefighting: Wear protective pressure self-contained breathing apparatus (SCBA)and full turnout gear. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: Avoid breathing vapor. Avoid contact with skin, eye or clothing. Do not touch damaged containers or spilled materials unless wearing appropriate protective clothing. 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Positive pressure, full-face piece self-contained breathing apparatus(SCBA), or positive pressure supplied air respirator with escape SCBA (NIOSH approved). Emergency Procedures: ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Do not touch or walk through spilled material. Isolate hazard area and keep unnecessary people away. Remove all possible sources of ignition in the surrounding area. Notify authorities if any exposure to the general public or the environment occurs or is likely to occur. Do not use combustible materials such as sawdust. 6.2. Environmental Precautions Stop spill/release if it can be done safely. Prevent spilled material from entering sewers, storm drains, other unauthorized drainage systems and natural waterways by using sand, earth, or other appropriate barriers. 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Wash hands after use. Do not get in eyes, on skin or on clothing. Do not breathe vapors or mists. Use good personal hygiene practices. Eating, drinking and smoking in work areas is prohibited. Remove contaminated clothing and protective equipment before entering eating areas. Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Use only with adequate ventilation to control air contaminants to their exposure limits. The use of local ventilation is recommended to control emissions near the source. Storage Conditions: Keep container(s) tightly closed and properly labeled. Store in cool, dry, well-ventilated areas away from heat, direct sunlight and incompatibilities. Store in approved containers and protect against physical damage. Keep containers securely sealed when not in use. Indoor storage should meet OSHA standards and appropriate fire codes. Containers that have been opened must be carefully resealed to prevent leakage. Empty container retain residue and may be dangerous. Do not cut, drill, grind, weld, or perform similar operations on or near containers. Do not pressurize containers to empty them. Ground all structures, transfer containers and equipment to conform to the national electrical code. Use procedures that prevent static electrical sparks. Static electricity may accumulate and create a fire hazard. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters 8.2. Exposure Controls Appropriate Engineering |Provide exhaust ventilation or other engineering Controls |controls to keep the airborne concentrations of |vapors below their respective threshold limit value. Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection | Eye Protection |Wear eye protection with side shields or goggles. |Wear indirect-vent, impact and splash resistant |goggles when working with liquids. If additional |protection is needed for entire face, use in |combination with a face shield. Skin and Body Protection |Use of gloves approved to relevant standards made |from the following materials may provide suitable |chemical protection: PVC, neoprene or nitrile rubber |gloves. Suitability and durability of a glove is |dependent on usage, e.g. frequency and duration of |contact, chemical resistance of glove material, |glove thickness, dexterity. Always seek advice from |glove suppliers. Contaminated gloves should be |replaced. Use of an apron and over- boots of |chemically impervious materials such as neoprene or |nitrile rubber is recommended to avoid skin |sensitization. The type of protective equipment must |be selected according to the concentration and |amount of the dangerous substance at the specific |workplace. Launder soiled clothes or properly |disposed of contaminated material, which cannot be |decontaminated. Respiratory Protection |If engineering controls do not maintain airborne |concentrations to a level which is adequate to |protect worker, a respiratory protection program |that meets or is equivalent to OSHA 29 CFR 1910.134 |and ANSI Z88.2 should be followed. Check with |respiratory protective equipment suppliers. Where |air-filtering respirators are suitable, select an |appropriate combination of mask and filter. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State | Appearance |Amber liquid Odor |Characteristic odor Odor Threshold |N.A. pH |N.A. Relative Evaporation Rate |0.1 Â± 0.1 (butylacetate=1) | Melting Point |N.A. Freezing Point |N.A. Boiling Point |Low Boiling Point > 350 Â°F |High Boiling Point N.A. Flash Point |320 Â°F Auto-ignition Temperature |830 Â°F Decomposition Temperature |N.A. Flammability (solid, gas) |Flash Point at or above 200 Â°F Vapor Pressure |9 Â± 1 mmhg @ 68 Â°F Relative Vapor Density at 20 Â°C |N.A. Relative Density | Specific Gravity | Solubility |N.A. Partition coefficient: | n-octanol/water | Viscosity |N.A. Lower Flammable Limit |NA Upper Flammable Limit |NA 9.2. Other Information % Solids By Weight 100.00000% % VOC 0.00000% Density 7.01658 lb/gal Density VOC 0.00000 lb/gal VOC Actual 0.00000 g/l VOC Actual 0.00000 lb/gal VOC Composite Partial Pressure N.A. SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity 10.2 Chemical Stability The product is stable under normal storage conditions. 10.3 Possibility of Hazardous Reactions Will not occur. 10.4 Conditions to Avoid No data available. 10.5 Incompatible Materials Nitric acid, sulfuric acid, strong oxidizing agents. 10.6 Hazardous Decomposition Products No data available. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: High vapor/aerosol concentrations, (greather than approximately 1000ppm) are irritating to the eyes and the respiratory tract, may cause headaches, dizziness, anesthesia, drowsiness, unconsciousness, and other central nervous system effects, including death. Skin Corrosion/Irritation: Low order of toxicity. Frequent or prolonged contact may irritate and cause dermatitis. Skin contact may aggravate an existing dermatitis condition. Serious Eye Damage/Irritation: Slightly irritating but does not injure eye tissue. Respiratory or Skin Sensitization: No data available Germ Cell Mutagenicity: No data available Carcinogenicity: No data available Reproductive Toxicity: No data available Specific Target Organ Toxicity (Single Exposure): No data available Specific Target Organ Toxicity (Repeated Exposure): No data available Aspiration Hazard: Small amounts of this product aspirated into the respiratory system during ingestion or vomiting may cause mild to severe pulmonary injury, possibly progressing to death. Minimal toxicity. Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity No data available. 12.2. Persistence and Degradability No data available. 12.3. Bioaccumulative Potential No data available. 12.4. Mobility in Soil No data available. 12.5. Other Adverse Effects No data available. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Under RCRA, it is the responsibility of the user of the product, to determine a the time of disposal whether the product meets RCRA criteria for hazardous waste. Waste management should be in full compliance with federal, state, and local laws. Empty containers retain product residue which may exhibit hazards of material, therefore do not pressurize, cut, glaze, weld or use for any other purposes. Return drums to reclamation centers for proper cleaning and reuse. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Not regulated. Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |Not regulated. Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name |Not regulated. Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations CAS Chemical Name % By Weight Regulation List 0008042-47-5 MINERAL OIL, SLAB OIL 70% - 87% SARA312 0067784-80-9 Soybean oil, Me ester 7% - 19% SARA312 SARA Section 311/312 Hazard Classes | Toxic Substances Control Act (TSCA) |Regulation List, TSCA |MINERAL OIL, SLAB OIL 0008042-47-5 |70% - 87% |Soybean oil, Me ester 0067784-80-9 |% - 19% 15.2 US State Regulations <COMPONENT> SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |Aug 14, 2015 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.