Product Categories See All
Track Order Status
SDS Sheet 0046500Printer Friendly View
SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: MAX ELIMINATOR CAS No: Not applicable. Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Cleaner, Degreaser. 1.3. Name, Address, and Telephone of the Responsible Party Company: Bradley Systems, Inc. 2720 S River Road Suite 146 Des Plaines, IL 60018 Phone: (773)-638-3827 1.4. Emergency Telephone Number Emergency |CHEMTREC, U.S.: 1-800-424-9300 International: +1-703-527-3887 number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Not | classified. | | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |None Signal Word (GHS-US) |No signal word. Hazard Statements (GHS-US) |No known significant effects or critical hazards. Precautionary Statements |General: Read label before use. Keep out of reach of (GHS-US) |children. If medical advice is needed, have product |container or label at hand. |Prevention: Not applicable. |Response: Not applicable. |Storage: Not applicable. |Disposal: Not applicable. 2.3. Other Hazards Other Hazards Not Contributing to the Classification: None known. 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Alcohols, C12-18, ethoxylated |69227-21-0 |1-5 | and propoxylated | | | 1 -Propoxypropan-2-ol |1569-01-3 |1-5 | Sodium xylenesulphonate |1300-72-7 |1-5 | Dodecyldimethylamine oxide |1643-20-5 |0.1-1 | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if symptoms occur. First-aid Measures After Skin Contact: Flush contaminated skin with plenty of water. Get medical attention if symptoms occur. First-aid Measures After Eye Contact: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation occurs. First-aid Measures After Ingestion: Wash out mouth with water. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: No known significant effects or critical hazards. Symptoms/Injuries After Skin Contact: No known significant effects or critical hazards. Symptoms/Injuries After Eye Contact: No known significant effects or critical hazards. Symptoms/Injuries After Ingestion: No known significant effects or critical hazards. Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed Notes to physician: Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled. Specific treatments: No specific treatment. Protection of first-aiders: No action shall be taken involving any personal risk or without suitable training. SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Use an extinguishing agent suitable for the surrounding fire. Unsuitable Extinguishing Media: None known. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: No specific fire or explosion hazard. Explosion Hazard: Decomposition products may include The following materials: carbon dioxide, carbon monoxide, Sulfur oxides, metal oxide/oxides Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: No special measures are required. Protection During Firefighting: Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: 6.1.1. For Non-emergency Personnel Protective Equipment: No action shall be taken involving any personal risk or without suitable training. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Put on appropriate personal protective equipment. Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: If specialized clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also the information in "For non emergency personnel". 6.2. Environmental Precautions Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: Small spill: Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor. Large spill : Stop leak if without risk. Move containers from spill area. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose of via a licensed waste disposal contractor. Note: see Section 1 for emergency contact information and Section 13 for waste disposal. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Put on appropriate personal protective equipment (see Section 8). Hygiene Measures: Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. See also Section 8 for additional information on hygiene measures. 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters 8.2. Exposure Controls Appropriate Engineering |Good general ventilation should be sufficient to Controls |control worker exposure to airborne contaminants. Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection |Chemical-resistant, impervious gloves complying with |an approved standard should be worn at all times |when handling chemical products if a risk assessment |indicates this is necessary. Eye Protection |Safety eye wear complying with an approved standard |should be used when a risk assessment indicates this |is necessary to avoid exposure to liquid splashes, |mists, gases or dusts. If contact is possible, the |following protection should be worn, unless the |assessment indicates a higher degree of protection: |safety glasses with side-shields. Skin and Body Protection |Personal protective equipment for the body should be |selected based on the task being performed and the |risks involved and should be approved by a |specialist before handling this product. Respiratory Protection |Use a properly fitted, air-purifying or supplied air |respirator complying with an approved standard if a |risk assessment indicates this is necessary. |Respirator selection must be based on known or |anticipated exposure levels, the hazards of the |product and the safe working limits of the selected |respirator. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Liquid. Appearance | Odor |Not available. Odor Threshold |Not applicable. pH |11.4 Relative Evaporation Rate |Not available. (butylacetate=1) | Melting Point |Not applicable. Freezing Point | Boiling Point | Flash Point | Auto-ignition Temperature | Decomposition Temperature | Flammability (solid, gas) | Vapor Pressure |Not available. Relative Vapor Density at 20 Â°C | Relative Density |1.011 Specific Gravity | Solubility |Not available. Partition coefficient: |Not available. n-octanol/water | Viscosity |Not available. Lower Flammable Limit |Not available. Upper Flammable Limit |Not available. 9.2. Other Information VOC content : 2.2 % (w/w) SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity No specific test data related to reactivity available for this product or its ingredients. 10.2 Chemical Stability The product is stable. 10.3 Possibility of Hazardous Reactions Under normal conditions of storage and use, hazardous reactions will not occur. 10.4 Conditions to Avoid No specific data. 10.5 Incompatible Materials Reactive or incompatible with the following materials: oxidizing materials and acids. 10.6 Hazardous Decomposition Products Under normal conditions of storage and use, hazardous decomposition products should not be produced. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Product/ingredient name Result Species Dose Exposure 1-Propoxypropan-2-ol LD50 Dermal Rabbit 3550 mg/kg - LD50 Oral Rat 2504 mg/kg - Sodium xylenesulphonate LD50 Oral Rat 7200 mg/kg - Skin Corrosion/Irritation: Not available. Serious Eye Damage/Irritation: Not available. Respiratory or Skin Sensitization: There is no data available. Germ Cell Mutagenicity: Carcinogenicity: There is no data available. Reproductive Toxicity: Specific Target Organ Toxicity (Single Exposure): There is no data available. Specific Target Organ Toxicity (Repeated Exposure): There is no data available. Aspiration Hazard: There is no data available. Symptoms/Injuries After Inhalation: No known significant effects or critical hazards. Symptoms/Injuries After Skin Contact: No known significant effects or critical hazards. Symptoms/Injuries After Eye Contact: No known significant effects or critical hazards. Symptoms/Injuries After Ingestion: No known significant effects or critical hazards. Chronic Symptoms: General: No known significant effects or critical hazards. Carcinogenicity: No known significant effects or critical hazards. Mutagenicity: No known significant effects or critical hazards. Teratogenicity: No known significant effects or critical hazards. Developmental effects: No known significant effects or critical hazards. Fertility effects: No known significant effects or critical hazards. SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity There is no data available. 12.2. Persistence and Degradability Not available. 12.3. Bioaccumulative Potential Product/ingredient name LogPow BCF Potential 1-Propoxypropan-2-ol 0.621 - low Sodium xylenesulphonate -3.12 - low 12.4. Mobility in Soil Soil/water partition coefficient (Koc): Not available. 12.5. Other Adverse Effects No known significant effects or critical hazards. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Empty containers or liners may retain some product residues. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |- Hazard Class |- |<PICTOGRAM PHRASE> Identification Number|Not regulated. | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |- Hazard Class |- Identification Number|Not regulated. Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name |- Identification Number|Not regulated. |<PICTOGRAM PHRASE> Hazard Class |- | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> Clean Water Act (CWA) 311: Sodium hydroxide Clean Air Act Section 112 (b) Hazardous Air Pollutants (HAPs): Not listed Clean Air Act Section 602 Class I Substances: Not listed Clean Air Act Section 602 Class II Substances: Not listed DEA List I Chemicals (Precursor Chemicals): Not listed DEA List II Chemicals (Essential Chemicals): Not listed SARA 302/304 Composition/information on ingredients: No products were found. SARA 304 RQ : Not applicable. SARA Section 311/312 Hazard Classes |Name |% |Fire Hazard |Sudden release of pressure |Reactive |Immediate |(Acute) Health Hazard |Delayed (Chronic) |Health |Hazard | |Alcohols, C12-18. ethoxylated and |propoxylatec |1-5 |No |No |No |Yes |No | |1-Propoxypropan-2-ol |1-5 |Yes |No |No |Yes |No | |Sodium xylenesulphonate |1-5 |No |No |No |Yes |No | |Dodecyldimethylamine oxide |0.1-1 |No |No |No |Yes |No | Toxic Substances Control Act (TSCA) |TSCA 8(a) CDR Exempt/Partial exemption: Not |determined |United States inventory (TSCA 8b): All |components are listed or exempted. 15.2 US State Regulations <COMPONENT> State regulations Massachusetts: None of the components are listed. New York: None of the components are listed. New Jersey: None of the components are listed. Pennsylvania: None of the components are listed. California Prop. 65: No products were found. . SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date | Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.