Product Categories See All
Track Order Status
SDS Sheet 0035020Printer Friendly View
SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: Window, Door & Siding 100% Silicone Rubber Sealant - Clear CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Caulking Compound 1.3. Name, Address, and Telephone of the Responsible Party Company DAP Products Inc. 2400 Boston Street Suite 200 Baltimore, MD 21224-4723 Phone: 888-327-8477 1.4. Emergency Telephone Number Emergency | 1-800-222-1222 number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Not a | hazardous | substance or | mixture. | | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |None Signal Word (GHS-US) |Not a hazardous substance or mixture. Hazard Statements (GHS-US) | Precautionary Statements | (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Hydrotreated middle distillate |64742-46-7 |10-25 |GHS03-GHS06 | | |H270-331 Silica, amorphous |7631-86-9 |2.5-10 |GHS03-GHS07 | | |H270-332 Silanetriol, methyl-, triaceta |4253-34-3 |2.5-10 |GHS03-GHS07 | | |H270-302-312-315-3 | | |19-332 | | | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: Material is not likely to present an inhalation hazard at ambient conditions. If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately. First-aid Measures After Skin Contact: Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist. First-aid Measures After Eye Contact: In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides. Get medical attention immediately. First-aid Measures After Ingestion: If swallowed. DO NOT INDUCE VOMITING. Get medical attention immediately. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Carbon Dioxide, Dry Chemical, Foam, Water Fog Unsuitable Extinguishing Media: 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: None known. Explosion Hazard: None known. Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Protection During Firefighting: Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear. Use water spray to cool exposed Surfaces. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions No information. 6.3. Methods and Material for Containment and Cleaning Up For Containment: No Information Methods for Cleaning Up: STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Contain spilled material and remove with inert absorbent. Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations. Scrape up dried material and place into containers. Use personal protective equipment as necessary. In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Avoid breathing vapor and contact with eyes, skin and clothing. Use only with adequate ventilation. Ensure fresh air entry during application and drying. Wash thoroughly after handling. Remove contact lenses before using. Do not handle contact lenses until all sealant has been cleaned from fingertips, nails and cuticles. Residual sealant may transfer to contact lenses and cause severe eye irritation. Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Avoid excessive heat and freezing. Do not store at temperatures above 120 degrees F. Store away from caustics and oxidizers. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Chemical Name ACGIH TLV-TWA ACGIH TLV STEL OSHA PEL-TWA OSHA PEL-CEILING Hydrotreated middle distillate N.E. N.E. N.E. N.E. Silica, amorphous N.E. N.E. N.E. N.E. Silanetriol, methyl-, triaceta N.E. N.E. N.E. N.E. 8.2. Exposure Controls Appropriate Engineering | Controls | Personal Protective Equipment| Materials for Protective |OTHER PROTECTIVE EQUIPMENT: Not required under Clothing |normal use. Hand Protection | Eye Protection |Goggles or safely glasses with side shields. Skin and Body Protection |Wear nitrile or neoprene gloves. Respiratory Protection |No personal respiratory protective equipment |normally required. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Paste Appearance |Clear Odor |Acetic Acid Odor Threshold |Not Established pH |Not Established Relative Evaporation Rate |Slower Than n-Bulyl Acetate (butylacetate=1) | Melting Point | Freezing Point |Not Established Boiling Point |N.I. - N.I. Flash Point |Min. 100 Deg C, Method: Seta Closed Cup Auto-ignition Temperature |Not Established Decomposition Temperature |Not Established Flammability (solid, gas) | Vapor Pressure |No Information Relative Vapor Density at 20 Â°C | Relative Density | Specific Gravity | Solubility |Not Established Partition coefficient: |Not Established n-octanol/water | Viscosity |Not Established Lower Flammable Limit | Upper Flammable Limit | 9.2. Other Information VOC Less Water Less Exempt Solvent, g/L: 28.9 VOC Material, g/L: 29 VOC as Defined by California Consumer Product Regulation, Wt/Wt%: 3.0 SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity 10.2 Chemical Stability Stable under recommended storage conditions. 10.3 Possibility of Hazardous Reactions 10.4 Conditions to Avoid Oxidizing agents. Excessive heat and freezing. 10.5 Incompatible Materials Incompatible with Strong bases and oxidizing agents. 10.6 Hazardous Decomposition Products Normal decomposition products, i.e., COx, NOx. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: Germ Cell Mutagenicity: Carcinogenicity: No Information Reproductive Toxicity: Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Under normal use conditions, this product is not expected to cause adverse health effects. During application and cure, this product releases methanol. During application and cure, this product releases acetic acid. Inhalation of vapors in high concentration may cause mild irritation of respiratory system (nose, mouth, mucous membranes). Symptoms/Injuries After Skin Contact: Under normal use conditions, this product is not expected to cause adverse health effects. Prolonged or repeated contact with skin may cause mild irritation. Symptoms/Injuries After Eye Contact: Under normal use conditions, this product is not expected to cause adverse health effects. Direct eye contact may cause irritation. Symptoms/Injuries After Ingestion: EFFECT OF OVEREXPOSURE - INGESTION: Under normal use conditions, this product is not expected to cause adverse health effects. Single dose oral toxicity is very low. Amounts ingested incidental to industrial handling are not likely to cause injury; however, ingestion of large amounts may cause injury. Ingestion may result in obstruction when material hardens. Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity Ecological injuries are not known or expected under normal use. 12.2. Persistence and Degradability 12.3. Bioaccumulative Potential 12.4. Mobility in Soil 12.5. Other Adverse Effects SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: DISPOSAL INFORMATION: This product does not meet the definition of a hazardous waste according to U.S. EPA Hazardous Waste Management Regulation. 40 CFR Section 261. Dispose as hazardous waste according to all local, state, federal and provincial regulations. State and Local regulations/restrictions are complex and may differ from Federal regulations. Responsibility for proper waste disposal is with the owner of the waste. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Not Regulated. Hazard Class |N.A. |<PICTOGRAM PHRASE> Identification Number|N.A. | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name | Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name | Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> SARA Section 311/312 Hazard Classes | Toxic Substances Control Act (TSCA) |Toxic Substances Control Act (TSCA) : All |ingredients in this product are either on |TSCA inventory list, or otherwise exempt. |This product contains the following chemical |substances subject to the reporting |requirements of TSCA 12(B) if exported from |the United States: No TSCA 12(b) components |exist in this product. 15.2 US State Regulations <COMPONENT> California Proposition 65 Carcinogens: This product does not contain any chemicals known to the state of California to cause Cancer. California Proposition 65 Reproductive Toxins: This product does not contain any chemicals known to the state of California to cause birth defects or other reproductive harm. SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |6/29/2015 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----|H270 |May cause or intensify fire; oxidiser. -- | | ----|H302 |Harmful if swallowed. -- | | ----|H312 |Harmful in contact with skin. -- | | ----|H315 |Causes skin irritation. -- | | ----|H319 |Causes serious eye irritation. -- | | |H331 |Toxic if inhaled. |H332 |Harmful if inhaled. Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.