JET

Jet Floor Drill Press: Belt, Variable, 245 RPM û 2,000 RPM, 230V AC /Three-Phase, 20 in Swing, 2 hp

Hover over image to magnify
Floor Drill Press,2 Hp,5/8"
Floor Drill Press,2 Hp,5/8"

#938975-7 | Pkg Qty: 1

$7,122.86 pkg | $7,122.86 ea
This item requires special shipping, additional charges may apply.

Technical Specifications

Key Specifications
Amps AC
9.2
Overall Depth
38-3/16 in.
Base Length
27 in.
Overall Height
79-1/2 in.
Base Width
19 in.
Overall Length
38-1/8 in.
Brand
JET
Overall Width
27 in.
Chuck Size
5/8 in.
Package Quantity
1
Corded/Cordless
Corded
Phase
Three-Phase
Drive Type
Belt
Primary Material Application
Metal
Horsepower
2 hp
Shipping Weight
792 lb.
Hz
60
Speed Control
Variable
Item
Floor Drill Press
Spindle Taper
3MT
Mfr. Part Number
JDP-20EVST -230
Swing
20 in.
Number of Spindle Speeds
Variable
Tool Weight
792 lb.
Number of T-Slots
2
Voltage
230 VAC
General
Application
Drilling, Tapping
Minimum Spindle Speed
245 RPM
Chuck Style
Keyed
Nominal Voltage
230V AC
Column Diameter
4 1/2 in
Power Down Feed Included
No
Coolant System
Yes
Quill Diameter
2 61/64 in
Current
9.2 A
Radial Arm
No
Drill Press Application
Drilling, Tapping
Speed Adjustment
Mechanical Variable Speed Drive System
Drill Press Type
Floor Stand
Speed Range
65 to 2,000 RPM
Drill Spindle Travel
6 in - 7 in
Spindle Speed Range
245 RPM - 2,000 RPM
Drilling Capacity in Cast Iron
1 1/2 in
Spindle Travel
6 in
Drilling Capacity in Stainless Steel
1 in
Spindle-to-Column Distance
10 7/16 in
Drilling Capacity in Steel
1 3/8 in
Table Length
22 in
Drilling Capacity in Wood
1 1/2 in
Table Load Capacity
154 lb
Guard Included
Yes
Table Slot
Yes
Includes
Chuck Guard
Table Slot Width
5/8 in
Maximum Overall Height
79 1/2 in
Table Width
18 3/4 in
Maximum Spindle Speed
2,000 RPM
Tapping Capacity in Stainless Steel
5/8 in
Maximum Spindle-to-Base Height
44 1/2 in
Tapping Capacity in Steel
3/4 in
Maximum Spindle-to-Table Height
30 1/4 in
Tapping Compatible
Yes

Product Description

Floor Drill Press, Primary Material Application Metal, Power Down Feed Included No, Drill Press Type Floor Stand, Drill Press Application Drilling, Tapping, Speed Control Variable, Speed Adjustment Mechanical Variable Speed Drive System, Swing 20 in, Spindle-to-Column Distance 10 7/16 in, Horsepower 2 hp, Voltage 230V AC, Spindle Taper 3MT, Number of Speeds Variable, Chuck Size 5/8 in, Chuck Style Keyed, Guard Included Yes, Coolant System Yes, Quill Diameter 2 61/64 in

Item Barcode
9389757
Floor Drill Press,2 Hp,5/8"
  Name Item Description
Grainger Dropship Grainger Dropship 52XH99
UNSPSC CODES UNSPSC CODES 27112703
VMRS (ATA) CODES VMRS (ATA) CODES 053-006-009

For more product information by email, click here