Share
Print
Electric Operated Drum Pump, Metered Dispensing with Manual Shut-Off, 8 GPM,115V AC, 1/10 hp Motor HP, Polypropylene
Hover over image to magnify
#938095-2 | Pkg Qty: 1
$2,433.80 pkg
| $2,433.80 ea
This item requires special shipping, additional charges may apply.
Technical Specifications
Key Specifications
Adapter Material
316 Stainless Steel
Metered
Yes
Adapter Type
RSV
Motor Enclosure
IP55
Agency Compliance
ISO
Motor RPM
1,750 RPM
Amps
3-1/2
Motor Type
2 Pole
Application
Diesel Exhaust Fluid, Anti-Freeze, Clean Water
Nozzle Material
Poly, Stainless Steel
Bearing Type
Sealed Ball
Nozzle Type
Manual
Brand
LIQUIDYNAMICS INC.
Outlet Size
3/4" Barb
Bypass Valve
Internal
Pack Quantity
1
Cord Length
54 in.
Phase
1
Duty
Intermittent
Power Source
Electric
Duty Cycle
Intermittent
Pressure Range
23 psi
Features
Dispenses 9 gpm
Pump Body Material
Polypropylene
Food Grade
No
Pump Design
Nutating Diaphragm
For Use With
Anti-Freeze, Clean Water, Diesel Exhaust Fluid
Seal Material
EPDM
Full Load Amps
4-1/2
Seal Type
Mechanical
GPM
8
Self-Priming
Yes
Gasket Material
EPDM
Shaft Material
Stainless Steel
Horsepower
1/10
Shipping Weight
170 lb.
Hose Length
12 ft.
Spout Length
3 in.
Hose Material
Peroxide Cured EPDM
Spout Material
316 Stainless Steel
Housing Material
Polypropylene
Suction Lift
6 ft.
Hz
60
Suction Tube Length
48 in.
Includes
Coupler, Drip Cup, Four-Wheel Heavy Duty Drum Cart, Hose, Nozzle, Nozzle Hanger
Transfer Pump Application
Agriculture, Automotive, Construction, Farming, Industrial, Marine, Trucking
Inlet
3/4"
Variable Speed
No
Inlet Size
3/4"
Voltage
115VAC
Item
Electric Operated Drum Pump
Wetted Materials
EPDM, Polypropylene, Stainless Steel
Manufacturers Warranty Length
20 yr. Pump, 1 yr. Dispensing System
pH Range
5.0 to 10
General
Compatible Chemicals
Acetic Acid 20%, Ammonium Hydroxide, Antifreeze (Coolant), Citric Acid 50%, DEF, Deionized Water, Ethyl (Ethanol), Ethylene Glycol, Formaldehyde, Formaldehyde 40%, Fresh Water, Glycerin, Isopropyl (Isopropanol), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfite, Sodium Hypochlorite/Bleach (to 20%)
Max. Fluid Temp.
104 Degrees F
Diesel Exhaust Fluid Compatible
Yes
Max. Head - Pumps
48 ft
Discharge Connection Type
Hose Barb
Max. Head Pressure
23 psi
Discharge Tube Outlet ID
3/4 in
Max. Oil Flow
8 gpm
Discharge Tube Outlet OD
1 in
Max. Outlet Pressure
23 psi
Explosion Proof
No
Max. Viscosity
10 cps
For Container Size
55 gal, 275 gal, 330 gal
Min. Fluid Temp.
17 Degrees F
For Container Type
Drum, Tote
Noise Level
70 db
For Media Type
Acetic Acid, Ammonium Hydroxide, Antifreeze, Bleach, Citric Acid, DEF, Ethanol, Ethylene Glycol, Formaldehyde, Glycerin, Isopropanol, Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfite, Water
Nominal Voltage
110V AC
Frequency (Hz)
60
Not Recommended Chemicals
Acetic Acid (Glacial), Acetic Acid 80%, Acetone, Ammonia (Liquids), Anhydrous Ammonia, Automatic Transmission Fluid, Biodiesel, Brake Fluid, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Cyclohexane, Diesel Fuel, E85, Ethyl Acetate, Fertilizers, Formic Acid, Fungicides, Gasoline, Heptane, Herbicides, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrazine, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Kerosene, Lacquer Thinners, Lithium Grease, Methyl (Methanol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Motor Oil, Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint, Paint Thinner, Pesticides, Phosphoric Acid (40% Solution), Sodium Bisulfate, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Toluene, Trichlorethylene (50%), Turpentine, Windshield Washer Fluid, Xylene
Height Above Container
4 in
Nozzle Operation
Manual
Hose Cover Material
Thermal Plastic
Number of Phases
1
Hose Inside Dia.
3/4 in
Pump Connection OD
1 in
Hose Outside Dia.
1 in
Pump Connection Type
Hose Barb
Hose Tube Material
EPDM
Pump Package Type
Metered Dispensing with Manual Shut-Off
Housing Material - Pumps
Polypropylene
Rated Voltage
115V AC
Includes Bung Adapter
No
Runs Dry
Yes
Includes Discharge Hose
Yes
Spout Connection Type
Integral to Nozzle
Includes Nozzle
Yes
Spout Discharge Size
3/4 in
Includes Spout
Yes
Suction Tube ID
3/4 in
Includes Suction Tube
Yes
Suction Tube Material
EPDM
Max. Flow Rate
8 gpm
Suction Tube OD
1 in
Product Description
Diesel exhaust fluid (DEF) electric pump carts combine a motor-driven pump and a wheeled frame for mobile dispensing and transferring of large volumes of DEF. These pump carts are used specifically with DEF to maintain purity when filling the reservoir of a diesel engine's Selective Catalytic Reduction (SCR) system. They are certified to ISO standards that regulate the handling, transportation, and storage of DEF. These carts are commonly used for draining DEF from one container and transferring it to another container. Mini-transfer carts transport the pump to a stationary container. Drum carts have space for carrying drums between locations.
Item Barcode
Electric Drum Pump,115VAC,8
| Name | Item | Description | |
|---|---|---|---|
|
Grainger Dropship | 49NT57 | |
|
UNSPSC CODES | 40151532 | |
|
VMRS (ATA) CODES | 053-006-009 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here