Share  
Print  
BUSSMANN

Fuse: 60 A Amps, 250V AC, H, 3 in L x 13/16 in dia Fuse Size, Cylindrical Body

Hover over image to magnify
Fuse,Class H,60A,Ren Series
Fuse,Class H,60A,Ren Series

#933791 | Pkg Qty: 1

Alternate products displayed may not be identical in style or function to original selection.
No alternate products are currently available
See more options:

Technical Specifications

Key Specifications
AC Voltage Rating
250 VAC
Indicating
No
Amperage
60 A
Indicating / Nonindicating
Nonindicating
Body Material
Melamine
Interrupt Rating
10k A at 250 VAC
Body Style
Cylindrical
Item
Fuse
Brand
BUSSMANN
Length
3 in.
Class
H
Mfr. Part Number
REN-60
DC Voltage Rating
Not Rated
Package Quantity
1
Diameter
13/16 in.
Rejection / Nonrejection
Nonrejection
Element
Dual
Series
Ren
Functionally Equal To
Mersen/Ferraz Shawmut RF, Littelfuse RLN
Shipping Weight
.09 lb.
Fuse Amps
60A
Speed
Time Delay
Fuse Holder Code
K
Type
Low Voltage
Fuse Speed
Time Delay
Voltage Rating
250 VAC
Fuse Voltage Rating
250 VAC
General
Compatible Fuse Block Series
2HKRFB, H250, HM600
Fuse Size
3 in L x 13/16 in dia
Equivalent Series
REN, RF, RLN
Renewable
Yes
Fits Fuse Block Style
Nonrejection

Product Description

Time-delay, nonindicating UL Class H fuses have a 10kA interrupting rating (IR) for general purpose use in existing installations where a small-interrupt, slow-blow fuse is needed. They're sometimes used in place of Class K5 fuses to downgrade from a current-limiting system. These renewable fuses have a fusible link that can be replaced after the fuse blows to allow reuse. They tolerate temporary inrush currents without opening, which prevents nuisance-blowing from equipment startups. They open to disconnect an electrical circuit when exposed to sustained loads and short circuits. These fuses have no indicator for identifying a blown fuse, so they're sometimes used with an indicating fuse block or cover.

UL Class H and K5 fuses are used as replacement fuses for overcurrent protection in older HVAC installations. These fuses are dimensionally the same, so they can be interchanged to change from a current-limiting system using Class K fuses to a noncurrent-limiting system using Class H fuses. Class H fuses are used in low-interrupt applications while Class K fuses have a higher interrupting rating.

Expertly Selected Product Pairings

Puller,Fuse,Medium
$45.12 pkg | $45.12 ea
Item: 915926-8 | Pkg Qty: 1

Item Barcode
9337910
Fuse,Class H,60A,Ren Series
 NameItemDescription
Grainger DropshipGrainger Dropship4XH74Fuse,Class H, 60A,REN
UNSPSC CODESUNSPSC CODES39121606
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Fuse,Class H, 60A,REN

For more product information by email, click here