Share  
Print  
CONTINENTAL

Pressure Washer Hose, 4,000 PSI, -20° to 250°F Temp. Range, 3/8", 100 ft, Neoprene

Hover over image to magnify
Pressure Washer Hose,3/8" Id x
Pressure Washer Hose,3/8" Id x

#932033-9 | Pkg Qty: 1

$567.36 pkg | $567.36 ea

Drop Ship Item

Shipping to 60045

Technical Specifications

Key Specifications
Bend Radius
3-3/4 in.
Inside Diameter
3/8 in.
Brand
CONTINENTAL
Item
Pressure Washer Hose
Fitting Size
3/8 in. x 3/8 in.
Mfr. Part Number
NPK-4K038-100MMS
Fitting Type
MNPT x MNPT
Pack Quantity
1
Hose Length
100 ft.
Shipping Weight
22 lb.
General
For Media Type
Air, Calcium Chloride, Carbon Dioxide, Ethanol, Ethylene Glycol, Formaldehyde, Glycerin, Heptane, Hexane, Isopropanol, Kerosene, Lubricated Air, Methanol, Naphtha, Nitrogen Gas, Parrafins (Wax), Sodium Bisulfate, Solvents, Stoddard Solvent, Turpentine, Water
Hose Reinforcement Material
Carbon Steel
Hose Configuration
Coupled Assembly
Hose Reinforcement Type
Braid
Hose Cover Material
Neoprene
Hose Strain Relief
Yes
Hose Fitting A Material
Carbon Steel
Hose Tube Material
Nitrile
Hose Fitting A Type
MNPT
Max. Working Pressure @ 70 F
4,000 psi
Hose Fitting B Material
Carbon Steel
Not Recommended Chemicals
Acetic Acid (Glacial), Acetone, Ammonia (Liquids), Ammonium Hydroxide, Anhydrous Ammonia, Automatic Transmission Fluid, Beverage, Brake Fluid, Chromic Acid 30%, Chromic Acid 50%, Cyclohexane, DEF, Diesel Fuel, Dry Food, Ethyl Acetate, Formaldehyde, Formic Acid, Fuel Oil, Gasoline, Hydraulic Fluid (Petroleum), Hydraulic Fluid (Synthetic), Hydrazine, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Liquid Propane, LP Gas, Methyl Chloride, Methyl Ethyl Ketone (MEK), Motor Oil, Natural Gas, Nitric Acid (50% Solution), Oxygen, Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Refrigerant R-12, Refrigerant R-134a, Refrigerant R-22, Refrigerant R-404A, Refrigerant R-407C, Refrigerant R-502, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Sodium Hypochlorite/Bleach (to 20%), Steam, Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Toluene, Trichlorethylene (50%), Xylene
Hose Fitting B Type
MNPT
Pressure Washer Hose Type
Water Hose
Hose Fittings
Carbon Steel 3/8 in MNPT x Carbon Steel 3/8 in MNPT
Safety Factor
4:1
Hose Inside Dia.
3/8 in
Temp. Range
-20° to 250°F
Hose Outside Dia.
0.6875 in

Product Description

Neptune 4001-R pressure washer hose assemblies are suitable for hot- and cold-water pressure-washing applications. They come with fittings on the ends of the hose for connecting to pressure-washing equipment. The hoses are reinforced with one braided steel wire that provides strength. They are designed for use on pressure washer machines with a maximum working pressure of 4000 psi. The hoses have a nitrile tube that resists oils, solvents, and aromatics. They also have an oil-resistant synthetic rubber cover with a smooth finish.

Pressure washer hoses (also known as power-washer hoses) connect to a compatible pressure washer to convey pressurized jets of water that loosen and remove dirt, grime, grease, oils, and other substances from equipment and surfaces. These high-pressure hoses are used for cleaning and sanitation tasks in a wide range of industries.

Item Barcode
9320339
Pressure Washer Hose,3/8" Id x
 NameItemDescription
Grainger DropshipGrainger Dropship55CN96Pressure Washer Hose,
UNSPSC CODESUNSPSC CODES47121903
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Pressure Washer Hose,

For more product information by email, click here