8 ft. 300 lb. Load Capacity Fiberglass Stepladder
Werner® 8 ft. IA Fiberglass Leaning Ladder features LEANSAFE™ ladder top designed to lean against flat wall surfaces, wall corners, poles, and wall studs, protecting these surfaces with a nonmarring rubber bumper pad. Can be used as either a standard stepladder or as a leaning ladder. Using as a stepladder requires the lower rear rail to be latched to the front rail connection point, allowing the user to get closer to designated work area. Leaning requires the rear is to be latched to the front rail. Single latch ladder is easy to open/close and switch modes. The top base of the ladder has a drill holder, tool slots, fasteners bin, tape measure slot, and can hold a paint can of each 1 gal. and 1 qt. Curved footpad on front feet maximizes surface contact with the ground in both leaning and stepladder mode. Features double riveted slip-resistant TRACTION-TRED® steps that provide solid footing when moving up and down the ladder. Two-color ladder allows easy identification of standard stepladder and leaning ladder modes when in use from a distance. Load capacity of 300 lb.
|Grainger Dropship||416K78||Stepladder, Fiberglass,|
|VMRS (ATA) CODES||053-006-009||Stepladder, Fiberglass,|
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here