3/8" NPT Filter/Regulator/Lubricator with 0 to 125 psi Adjustment Range
The 3-pc. design integrates filter, regulator, and lubricator into a single unit. Ready-to-mount assembly comes with a pressure gauge and modulator T-bracket/joiner assembly. For the Max. Flow, the CFM is measured with 100 psig inlet adjusted to a set pressure of 90 psig and a 15 psig pressure drop. Note: Unit should not be located in areas subject to direct sunlight, direct impact, or temperatures outside rated range. Incompatible with chlorinated hydrocarbons, ketones, esters, and certain alcohols. Not for use in air systems where compressors are lubricated with fire-resistant fluids such as phosphate ester or diester. Should not be used where strong acids or bases are present or in salt-laden atmospheres.
|Grainger Dropship||6D768||FRL,3 pcs,3/ 8" NPT,5|
|VMRS (ATA) CODES||053-006-009||FRL,3 pcs,3/ 8" NPT,5|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here