Share  
Print  
DAYTON

Effluent Pump, HP 1, 240 VAC, Intermittent Duty Cycle, Max. Head 109.0 ft.

Hover over image to magnify
Pump,Effluent,1hp
PI_Asset_948169
PI_Asset_948170
Pump,Effluent,1hp
PI_Asset_948169
PI_Asset_948170

#927092-7 | Pkg Qty: 1

$1,403.18 pkg | $1,403.18 ea
Pricing is subject to change without notice

Drop Ship Item

Shipping to 60045

Technical Specifications

Key Specifications
Amps
8.3 A
Hz
60
Base Material
Cast Iron
Impeller Material
Polypropylene
Brand
DAYTON
Input Phase AC
1
Cord Length
20 ft.
Item
Submersible Effluent Pump
Diameter
12-3/16 in.
Length
16-3/4 in.
Discharge NPT
2 in.
Maximum Diameter Solids
3/4 in.
Duty
Intermittent
Maximum Head
109 ft.
GPM of Water @ 10 Ft. of Head
85
Maximum Liquid Temperature
104°F
GPM of Water @ 100 Ft. of Head
12
Maximum Temperature (Deg. F)
104
GPM of Water @ 15 Ft. of Head
83
Mechanical Seal
SiC/Buna
GPM of Water @ 20 Ft. of Head
80
Mfr. Part Number
3BB85
GPM of Water @ 25 Ft. of Head
78
Minimum Sump Pit Diameter
18 in.
GPM of Water @ 30 Ft. of Head
74
Operation Type
Automatic
GPM of Water @ 35 Ft. of Head
71
Pack Quantity
1
GPM of Water @ 40 Ft. of Head
68
Phase
1
GPM of Water @ 45 Ft. of Head
64
Pump Body Material
Cast Iron
GPM of Water @ 5 Ft. of Head
86
Pump HP
1
GPM of Water @ 50 Ft. of Head
60
Pump RPM
3450
GPM of Water @ 55 Ft. of Head
56
Pump Type
Automatic Operation (Switch Included)
GPM of Water @ 60 Ft. of Head
52
Shaft Material
Silicon Carbide/Buna N
GPM of Water @ 70 Ft. of Head
44
Shaft Seal
Silicon Carbide/Buna N
GPM of Water @ 80 Ft. of Head
34
Shaft Seal Material
Buna-N, Silicon Carbide
GPM of Water @ 90 Ft. of Head
22
Shipping Weight
81 lb.
Handle
Yes
Switch Type
Tether
Height
16-3/4 in.
Top Material
Cast Iron
Horsepower
1
Type
Automatic Operation (Switch Included)
Housing
Cast Iron
Voltage
240 VAC
Housing Material
Cast Iron
Width
12-3/16 in.
General
Body Dia.
12 3/16 in
Min. Sump Pit Dia.
18 in
Discharge Dia.
2 in
Minimum Water Depth
18 in
Flow Rate @ 10 Ft. of Head
85 gpm
Nominal Voltage
220V AC
Flow Rate @ 100 Ft. of Head
12 gpm
Phase - Pumps
1
Flow Rate @ 15 Ft. of Head
83 gpm
Rated Voltage
240V AC
Flow Rate @ 20 Ft. of Head
80 gpm
Shaft Seal Material - Pumps
Nitrile Rubber, Silicon Carbide
Flow Rate @ 40 Ft. of Head
68 gpm
Switch Actuation
Tether Float
Flow Rate @ 60 Ft. of Head
52 gpm
Switch Electrical Connection
Piggyback
Flow Rate @ 80 Ft. of Head
34 gpm
Width at Widest Point
12 3/16 in
HP
1

Product Description

These single-phase 200 to 240V effluent pumps use a higher voltage that allows for larger motors that require less current than lower-voltage motors. They are used to drain treated water containing small solids from septic tanks and out to a drain field.

Expertly Selected Product Pairings

Check Valve,2 In,Slipxslip,PVC
$47.55 pkg | $47.55 ea
Item: 912791-2 | Pkg Qty: 1
Sealant,Thread
$20.47 pkg | $20.47 ea
Item: 913406-5 | Pkg Qty: 1
Hose,Suction,2 In
$119.72 pkg | $119.72 ea
Item: 914181-9 | Pkg Qty: 1
Sealant,Pipe Thread
$35.54 pkg | $35.54 ea
Item: 914259-8 | Pkg Qty: 1
Sealant Tape,1/2 In. W,260 In.
$2.83 pkg | $2.83 ea
Item: 916013 | Pkg Qty: 1
Suction Hose,2 In x 100 Ft,
$1,209.80 pkg | $1,209.80 ea
Item: 916025-5 | Pkg Qty: 1
Sealant Tape,1/2 x 260 In
$2.26 pkg | $2.26 ea
Item: 918259-9 | Pkg Qty: 1
Suction Hose,2 In x 20 Ft,Black
$241.69 pkg | $241.69 ea
Item: 918919-2 | Pkg Qty: 1

Compliance & Restrictions

California Proposition 65 Icon
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
9270927
Pump,Effluent,1hp
 NameItemDescription
Grainger DropshipGrainger Dropship3BB85Pump, Effluent,1hp
UNSPSC CODESUNSPSC CODES40151512
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Pump, Effluent,1hp

For more product information by email, click here