This product has been discontinued and is no longer available. Shop Category
Share
Print
DAYTON
120/240 VAC Totally Enclosed Fan-Cooled Straight Center Discharge Pump, 1-Phase, 2-1/2" NPT Inlet Siz
Hover over image to magnify
#926517-3 | Pkg Qty: 1
Alternate products displayed may not be identical in style or function to original selection.
Technical Specifications
Key Specifications
Amps
16.6/8.3 A
Maximum Liquid Temperature
180°F
Bearing Type
Ball
Maximum Pressure
26.5 psi
Bearings
Ball
Maximum Specific Gravity
1
Best Efficiency GPM @ Head
101 gpm @ 48 ft.
Mfr. Part Number
4ZA35
Best Efficiency Range GPM @ Head
65 to 33 gpm @ 90 to 140 ft..
Mfr. Warranty Length
1 yr.
Brand
DAYTON
Minimum GPM @ Head
93 gpm @ 50 ft.
Discharge Pressure
Straight Center Discharge Pump
Motor Enclosure
TEFC
Drain Plug
Easily Accessible
Motor RPM
3500
Duty
Continuous
Motor Type
Capacitor Start
Frame
56J
NEMA/IEC Frame
56J
GPM of Water @ 20 Ft. of Head
168
Outlet
2 in. NPT
GPM of Water @ 30 Ft. of Head
153
Outlet Size
2 in. NPT
GPM of Water @ 40 Ft. of Head
130
Pack Quantity
1
GPM of Water @ 50 Ft. of Head
96.2
Phase
1
Height
12 in.
Port Rotation
4 Position Increments
Horsepower
2
RPM
3500
Housing Material
Cast Iron
Screw Material
Zinc Plated
Hz
60
Seal Application
Nonflammable And Nonabrasive Liquids Compatible With Seal Component Materials Up To 180F
Impeller Material
Bronze
Seal Material
Standard, Carbon Ceramic Faces, Buna Elastomer and Stainless Steel Parts
Impeller Type
Enclosed
Seal Type
Mechanical
Inlet
2-1/2 in. NPT
Service Factor
1
Inlet Pressure
100 psi
Shaft Material
Stainless Steel
Item
Straight Center Discharge Pump
Shipping Weight
90 lb.
Length
16-1/4 in.
Type
Straight
Maximum Diameter Solids
0.40625 in.
Voltage
120/240 VAC
Maximum Fluid Viscosity
100 SSU
Volute Material
Cast Iron
Maximum GPM @ Head
163 gpm @ 20 ft.
Wetted Materials
CI,BR, Carbon, Ceramic, Buna N, Stainless Steel
Maximum Head
63 ft.
Width
9-3/8 in.
General
Application
For High Volume Service, For Industrial And Commercial Applications, Such As Process Applications, Dewatering, Irrigation,Chemical Transfer, Decorative Water Features.
Impeller Design
Closed
Best Efficiency Head
90 to 140 ft
Intake Type
NPT
Compatible Discharge Pipe Size
2 in
Maximum Media Temperature
180 Degrees F
Compatible Intake Pipe Size
2 1/2 in
Motor Frame Designation
56J
Discharge Rotation
90 Degrees Increments
Nameplate Voltage
115/230V AC
Discharge Type
NPT
Pump Housing Material
Cast Iron
Flow Rate @ 20 ft of Head (Maximum)
168 gpm
Shut Off Pressure (Maximum)
27 psi
Flow Rate @ 30 ft of Head (Maximum)
153 gpm
Solid Diameter (Maximum)
0.41 in
Flow Rate @ 40 ft of Head (Maximum)
130 gpm
Specific Gravity (Maximum)
1
Flow Rate @ 50 ft of Head (Maximum)
96.2 gpm
Wetted Material
Brass, Buna-N, Carbon, Cast Iron, Ceramic, Stainless Steel
For Use With
Nonflammable and Non-abrasive Liquids Compatible with Pump Component Materials
Product Description
Dayton straight centrifugal pumps are close-coupled to continuous duty motors and designed to provide high volume service for industrial and commercial applications such as liquid transfer, and for nonflammable liquids compatible with pump component materials
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Pump,2 Hp,1 Ph,120/240VAC
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 4ZA35 | Pump,2 HP,1 Ph,120/240VAC |
 | UNSPSC CODES | 40151503 | |
 | VMRS (ATA) CODES | 053-006-009 | Pump,2 HP,1 Ph,120/240VAC |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here