Share  
Print  
DAYTON

1/2-HP Self Priming Centrifugal Pump, 78 ft. Max. Head, 1/8" Max. Dia. Solids, Cast Iron

Hover over image to magnify
Pump,Centrifugal,1/2hp
Pump,Centrifugal,1/2hp

#925986-2 | Pkg Qty: 1

$561.49 pkg | $561.49 ea

Drop Ship Item

Shipping to 60045

Technical Specifications

Key Specifications
Agency Compliance
c UL us
Maximum Liquid Temperature
200°F
Amps
8.4/4.8 A
Maximum Pressure
33.7 psi
Bearing Type
Ball
Maximum Specific Gravity
1
Best Efficiency GPM @ Head
33 gpm @ 46 ft.
Mfr. Part Number
4UA67
Best Efficiency Range GPM @ Head
18 to 38 gpm @ 60 to 40 ft.
Mfr. Warranty Length
1 yr.
Brand
DAYTON
Minimum GPM @ Head
10 gpm @ 70 ft.
Drain Plug
Easily Accessible
Motor Design
Capacitor-Start
Duty
Continuous
Motor Enclosure
ODP
Frame
56J
Motor RPM
3500
GPM of Water @ 10 Ft. of Head
53
Motor Type
Single Phase
GPM of Water @ 15 Ft. of Head
51
NEMA/IEC Frame
56J
GPM of Water @ 20 Ft. of Head
49
Outlet
1-1/2 in. NPT
GPM of Water @ 25 Ft. of Head
47
Outlet Size
1-1/2 in. NPT
GPM of Water @ 30 Ft. of Head
45
Pack Quantity
1
GPM of Water @ 40 Ft. of Head
38
Phase
1
GPM of Water @ 50 Ft. of Head
28
Port Rotation
No
GPM of Water @ 60 Ft. of Head
18
RPM
3450
GPM of Water @ 70 Ft. of Head
9
Screw Material
Zinc Plated
Height
9-1/8 in.
Seal Application
Non-Flammable and Non-Abrasive Liquids Compatible with Seal Component Materials Up to 180° F
Horsepower
1/2
Seal Material
Carbon Ceramic-Buna N
Housing Material
Cast Iron
Seal Type
Mechanical
Hz
60
Self-Priming
Yes
Impeller Material
Cast Iron
Service Factor
1.6
Impeller Type
Semi Open
Shaft Material
Stainless Steel
Inlet
1-1/2 in. NPT
Shipping Weight
52.85 lb.
Inlet Pressure
100 psi
Suction Lift
20 ft.
Item
Centrifugal Pump
Type
Self Priming
Maximum Case Pressure
165 psi
Voltage
115/230 VAC
Maximum Diameter Solids
1/8 in.
Volute Material
Cast Iron
Maximum Fluid Viscosity
100 SSU
Warranty
2ACD1
Maximum GPM @ Head
54 gpm @ 10 ft.
Wetted Materials
Cast Iron, Buna N, Carbon, Ceramic
Maximum Head
78 ft.
Width
6-7/8 in.
General
Application
For High-Volume Industrial and Commercial Applications Including Liquid and Chemical Transfer, Irrigation, Dewatering, and Processing Application
Includes
Manual
Best Efficiency Flow
18 to 38 gpm
Intake Type
NPT
Best Efficiency Head
40 to 60 ft
Intake and Discharge Size
1 1/2 in , 1 1/2 in
Compatible Discharge Pipe Size
1 1/2 in
Maximum Feet of Head
78 ft
Compatible Intake Pipe Size
1 1/2 in
Minimum Media Temperature
40 Degrees F
Discharge Type
NPT
Motor Enclosure Type
ODP
Flow Rate @ 10 ft of Head (Maximum)
54 gpm
Motor Frame Designation
56J
Flow Rate @ 15 ft of Head (Maximum)
51 gpm
Nameplate Voltage
115/230V AC
Flow Rate @ 20 ft of Head (Maximum)
49 gpm
Nominal Voltage
115/230V AC
Flow Rate @ 30 ft of Head (Maximum)
42 gpm
Pump Housing Material
Cast Iron
Flow Rate @ 40 ft of Head (Maximum)
39 gpm
Shut Off Pressure (Maximum)
33 psi
Flow Rate @ 50 ft of Head (Maximum)
30 gpm
Solid Diameter (Maximum)
0.13 in
Flow Rate @ 60 ft of Head (Maximum)
20 gpm
Specific Gravity (Maximum)
1
For Use With
Non-Flammable/Non-Abrasive Liquids, Compatible with Pump Material
Suction Lift (Maximum)
20 ft
For Use With Potable Systems
No
Wetted Material
Buna-N, Carbon, Cast Iron, Ceramic
Impeller Design
Semi-Open

Product Description

Dayton self-priming centrifugal pumps are close-coupled to continuous duty motors and designed to provide high volume service for industrial and commercial applications. These applications include process applications, for nonflammable liquids compatible with pump component materials, liquid and chemical transfer, dewatering, irrigation, and decorative water features.

Compliance & Restrictions

California Proposition 65 Icon
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
9259862
Pump,Centrifugal,1/2hp
 NameItemDescription
Grainger DropshipGrainger Dropship4UA67Pump, Centrifugal,
UNSPSC CODESUNSPSC CODES40151503
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Pump, Centrifugal,

For more product information by email, click here