Home All Products Fluid Transfer & Pumps Water Pumps Engine Driven Pumps Portable Engine Driven Pumps SKU: 924750-6
TSURUMI

8 HP Aluminum, Cast Iron 242cc Engine Driven Centrifugal Pump, 1.59 gal Tank Capacity

Hover over image to magnify
Engine Driven Centrifugal Pump,
Engine Driven Centrifugal Pump,

#924750-6 | Pkg Qty: 1

$2,023.58 pkg | $2,023.58 ea
This item requires special shipping, additional charges may apply.

Technical Specifications

Key Specifications
Agency Compliance
EPA/CARB
Housing
Aluminum
Application
Dewatering
Ignition Type
Recoil
Base Material
Aluminum
Impeller Material
Cast Iron
Bearing Type
Ball, Permanently Lubricated and Sealed
Impeller Type
Semi Open
Brand
TSURUMI
Includes
Impeller Wrench
Casing Adapter
Aluminum
Inlet
4 in. NPT
Check Valve
Buna-N
Item
Engine Driven Centrifugal Pump
Discharge NPT
4 in.
Length
25 in.
Duty
Heavy
Material of Construction
Aluminum, Cast Iron
Engine Brand
Honda
Maximum Diameter Solids
25/64 in.
Engine RPM
3600
Maximum Head
95 ft.
Engine Size
242cc
Maximum Liquid Temperature
104°F
Engine/Motor Type
Gas
Maximum Pressure
41 psi
For Use With
Water
Maximum Suction Lift
26 ft.
Function
Dewatering
Mechanical Seal
Silicon Carbide
GPM @ 1 Ft. of Head
474
Mfr. Part Number
TE2-100HA
GPM of Water @ 10 Ft. of Head
432
Motor Type
Gas Engine
GPM of Water @ 100 Ft. of Head
25
Outlet
4 in. NPT
GPM of Water @ 15 Ft. of Head
412
Pack Quantity
1
GPM of Water @ 20 Ft. of Head
387
RPM
3600
GPM of Water @ 25 Ft. of Head
367
Roll Bar Frame
Steel
GPM of Water @ 30 Ft. of Head
342
Self-Priming
Yes
GPM of Water @ 35 Ft. of Head
320
Sensor Type
Low Oil
GPM of Water @ 40 Ft. of Head
280
Shaft Material
Stainless Steel
GPM of Water @ 45 Ft. of Head
262
Shaft Seal
Silicon Carbide
GPM of Water @ 5 Ft. of Head
470
Shipping Weight
109 lb.
GPM of Water @ 50 Ft. of Head
225
Solids Handling Capacity
3/8 in.
GPM of Water @ 60 Ft. of Head
175
Temperature Range
33 deg. to 104 deg. F
GPM of Water @ 70 Ft. of Head
125
Top Material
Aluminum
GPM of Water @ 80 Ft. of Head
75
Type
Centrifugal
GPM of Water @ 90 Ft. of Head
45
Volute/Wear Plate
Cast Iron
Handle
Cage Frame
Warranty
2 yr.
Height
23-1/2 in.
Width
18 in.
Horsepower
8
General
Discharge Dia.
4 in
HP
8 hp
Discharge Gender
Male
Impeller Design
Semi-Open
Discharge Standard
NPT
Inlet Dia.
4 in
Flow Rate @ 10 Ft. of Head
432.0 gpm
Inlet Gender
Male
Flow Rate @ 20 Ft. of Head
387.0 gpm
Inlet Standard
NPT
Flow Rate @ 40 Ft. of Head
280.0 gpm
Maximum Discharge Pressure
41 psi
Flow Rate @ 60 Ft. of Head
175.0 gpm
Maximum Self-Priming Lift
20.0 ft
Flow Rate @ 80 Ft. of Head
75.0 gpm
Pump Mechanism
Centrifugal
Frame Design - Pumps
Full Tubular Frame

Product Description

These remote-location engine-driven trash and utility pumps are gasoline powered so they don't need to be placed near an electrical outlet, and they run for long periods of time between refueling. They transfer large amounts of water containing medium to large solids, and they drain water using an inlet hose so the pumps don't have to be placed in the water that needs to be drained. Pumps have a tubular frame to protect the engine and the pump.

Item Barcode
9247506
Engine Driven Centrifugal Pump,
  Name Item Description
Grainger Dropship Grainger Dropship 20LR10 Engine Driven
UNSPSC CODES UNSPSC CODES 40151531
VMRS (ATA) CODES VMRS (ATA) CODES 053-006-009 Engine Driven

For more product information by email, click here