Stainless Steel Solenoid Valve Less Coil, 2-Way Valve Design, Normally Closed Valve Configuration
- Mount in any position To prevent backflow, add a check valve to the system (sold separately on page 4059). Valves that have OPD minimums beginning with 0 (e.g., 0 to 300 psi) are direct-acting and will open and close when line pressures are within minimum and maximum psi ranges. Valves that have OPD minimums starting at 2 or 5 (e.g., 5 to 150 psi) are designated pilot-operated and will open and close only if pressure differential between the inlet and outlet is within OPD ranges. Normally closed valves will open when energized. Normally open valves will close when energized. Standards: UL; CSA; Fluid Control Institute, Inc.; National Fluid Power Association (NFPA). WARNING: Not for use in explosive atmospheres. Note: Maximum suggested cycling rate is 10 times per min.
|Grainger Dropship||2A195||Solenoid Valve,2-Way,|
|VMRS (ATA) CODES||053-006-009||Solenoid Valve,2-Way,|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here