This product has been discontinued and is no longer available. Shop Category
Share
Print
APPROVED SUPPLIER
Jaw End Fitting, Jaw End, Orientation Right, Forged/Hot Dipped Galvanized Steel
Hover over image to magnify
#922171-9 | Pkg Qty: 1
Alternate products displayed may not be identical in style or function to original selection.
Technical Specifications
Key Specifications
Brand
APPROVED SUPPLIER
Pack Quantity
1
Item
Jaw End Fitting
Shipping Weight
.17 lb.
Mfr. Part Number
2ULP2
General
Take Up (In.)
4 1/2 in
Working Load Limit (Lb.)
800
Thread Dia. (In.)
5/16
Product Description
Turnbuckles
- Turnbuckles quickly tighten and loosen chain and wire rope, providing secure connections with the precise tension required. When ordering components, order 1 body and 2 ends (1 left-handed thread and 1 right-handed thread) to make a complete unit.
- Meet ASTM F1145-92, Type 1, Grade 1, Class D standards.
- WARNING: Do not exceed working load limit. Working load limit of an assembly is determined by the component with the lowest working load limit.
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Jaw End Fitting,Right,Dia 5/
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 2ULP2 | Jaw End Fitting, |
 | UNSPSC CODES | 31162405 | |
 | VMRS (ATA) CODES | 053-006-009 | Jaw End Fitting, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here