|Anchor Adhesive Type||Epoxy Anchor Adhesive||ICC Approved for Un-Cracked Concrete||Yes|
|Application||Surfaces to Receive Epoxy Must Be Clean, Base-Material Temperature Must Be 50Â° F or Above At Time Of Installation, For Best Results, Material Should Be 70Â° to 80Â°F At The Time of Application, Cartridges Should Not Be Immersed In Water to Facilitate Warming, Cartridges Should Be Stored In A Warm, Uniformly-Heated Area or Storage Container for A Sufficient Time to Allow Epoxy to Warm Completely, Mixed Material In Nozzle Can Harden In 5 to 7 Minutes At A Temperature of 40Â° F Or Above||Item||Structural Anchoring Adhesive|
|Brand||SIMPSON STRONG-TIE ANCHOR SYSTEMS||Mfg Part Number||SET-XP10-G|
|Characteristics||SET-XPÂ® 1:1 Two-Component, High-Solids, Epoxy-Based Anchoring Adhesive Formulated for Optimum Performance In Both Cracked and Uncracked Concrete, SET-XPÂ® Adhesive is Teal In Color In Order to Be Identified As High-Performance Adhesive for Adverse Conditions||Mixing Ratio||10:1|
|Container Size||8-1/2 oz.||Mixing Steps||Resin and Hardener are Dispensed and Mixed Simultaneously Through the Mixing Nozzle|
|Container Type||Cartridge||Pack Quantity||1|
|Curing Time||72 hr. or Less||Temperature Range||50 deg. to 110 deg.|
|For Use With||All Threaded Rod or Rebar||Type||Epoxy-Tie Anchoring Adhesive|
|ICC Approved for Cracked Concrete||Yes|
- Shipping Weight 1.32 lbs.
|VMRS (ATA) CODES||053-006-009||Structural Anchoring|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here