Share  
Print  
DAYTON

1/2 HP Submersible Sump Pump, Vertical Switch Type, Polypropylene Base Material

Hover over image to magnify
Sump Pump,1/2 Hp,1-1/4" NPT,10
PI_Asset_950600
PI_Asset_950601
Sump Pump,1/2 Hp,1-1/4" NPT,10
PI_Asset_950600
PI_Asset_950601

#920436-2 | Pkg Qty: 1

$316.86 pkg | $316.86 ea

Drop Ship Item

Shipping to 60045

Technical Specifications

Key Specifications
Alarm
No
Maximum Head
25 ft.
Alarm Included
No
Maximum Liquid Temperature
104°F
Amps
2.9 A
Maximum Temperature (Deg. F)
104
Base Material
Polypropylene
Mechanical Seal
Buna N
Bearing Type
Lubricated Ball
Mfr. Part Number
3YU73
Brand
DAYTON
Minimum Sump Pit Diameter
12 in.
Cord Length
10 ft.
NEC Cord Designation
SJTW
Diameter
9 in.
Off Point
2-9/16 in.
Discharge NPT
1-1/4 in. M
On Point
6-13/64 in.
Duty
Continuous
Pack Quantity
1
GPM of Water @ 10 Ft. of Head
35
Pump Body Material
Stainless Steel
GPM of Water @ 15 Ft. of Head
25
Pump HP
1/2
GPM of Water @ 20 Ft. of Head
12
Pump Type
Automatic
GPM of Water @ 5 Ft. of Head
42
Shaft Material
Stainless Steel
Gauge/Conductor
18/3
Shaft Seal
Buna N
Height
12-7/8 in.
Shaft Seal Material
Buna-N
Horsepower
1/2
Shipping Weight
11.05 lb.
Housing
Stainless Steel
Sump Pump Item
Submersible Sump Pump
Housing Material
Stainless Steel
Switch Type
Vertical
Hz
60
Top Material
Polypropylene
Impeller Material
Polyamide
Type
Automatic
Item
Submersible Sump Pump
Voltage
120 VAC
Maximum Diameter Solids
1/4 in.
General
Body Dia.
9 in
Includes
90 Degrees 1 1/4" NPT Discharge Elbow
Discharge Dia.
1 1/4 in
Min. Sump Pit Dia.
12 in
Discharge Gender
Male
Nominal Voltage
110 V AC
Discharge Standard
NPT
Rated Voltage
115V AC
Flow Rate @ 10 Ft. of Head
35 gpm
Shaft Seal Material - Pumps
Buna-N
Flow Rate @ 15 Ft. of Head
25 gpm
Switch Actuation
Vertical Float
Flow Rate @ 20 Ft. of Head
12 gpm
Switch Electrical Connection
Piggyback
Flow Rate @ 5 Ft. of Head
42 gpm

Product Description

These 110V stainless-steel submersible sump pumps come with a stainless-steel body that is more corrosion resistant than cast iron and are commonly used to drain water in sump pits. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Pumps have an unpainted finish.

Expertly Selected Product Pairings

Check Valve 1 1/2"
$23.80 pkg | $23.80 ea
Item: 910956-1 | Pkg Qty: 1
Check Valve,Tpr,1-1/4 In. Or 1-
$23.34 pkg | $23.34 ea
Item: 915562 | Pkg Qty: 1
Nipple,1 1/4 X 4", PVC
$3.67 pkg | $3.67 ea
Item: 932257-8 | Pkg Qty: 1

Compliance & Restrictions

California Proposition 65 Icon
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
9204362
Sump Pump,1/2 Hp,1-1/4" NPT,10
 NameItemDescription
Grainger DropshipGrainger Dropship3YU73Sump Pump,1/ 2 HP,1-1/4"
UNSPSC CODESUNSPSC CODES40151512
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Sump Pump,1/ 2 HP,1-1/4"

For more product information by email, click here