6-Pc. C2 Micrograin Carbide Combined Drill/Countersink Set, Uncoated Finish, 60°
#919899-4 | Pkg Qty: 1
Drop Ship Item
Technical Specifications
Key Specifications
General
Product Description
Center drills consist of a pilot drill and a countersink and are used to create holes at the center of a piece of stock so it can be turned between centers on a lathe. The pilot drill creates a small hole in the stock and the countersink expands the hole, leaving a small gap at the bottom of the hole that helps protect the lathe's centers from damage when the stock is turned on it. These sets contain multiple center drills in a range of sizes.
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 16T464 | Combo Drill/ Countersink |
 | UNSPSC CODES | 27112812 | |
 | VMRS (ATA) CODES | 053-006-009 | Combo Drill/ Countersink |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here