Share  
Print  
LITTLE GIANT

4/10 HP Submersible Sump Pump, Diaphragm Switch Type, Polypropylene Base Material

Hover over image to magnify
Sump Pump,4/10 Hp,1-1/2In,23ft
PI_Asset_949687
PI_Asset_949688
PI_Asset_949689
PI_Asset_949690
PI_Asset_949691
Sump Pump,4/10 Hp,1-1/2In,23ft
PI_Asset_949687
PI_Asset_949688
PI_Asset_949689
PI_Asset_949690
PI_Asset_949691

#918919-3 | Pkg Qty: 1

Alternate products displayed may not be identical in style or function to original selection.
Alternate Products
Sump Pump,1/3 Hp,1-1/2" NPT,15
$399.59 pkg | $399.59 ea
Item: 914651-3
Pkg Qty: 1
Sump Pump,1/3 Hp,1-1/2" NPT,10
$251.50 pkg | $251.50 ea
Item: 918485-7
Pkg Qty: 1
Sump Pump,1/3 Hp,1-1/2" NPT,15
$361.64 pkg | $361.64 ea
Item: 921811-1
Pkg Qty: 1

Technical Specifications

Key Specifications
Alarm
No
Maximum Liquid Temperature
140°F
Alarm Included
No
Maximum Temperature (Deg. F)
140
Amps
10 A
Mechanical Seal
CRB/CMC
Base Material
Polypropylene
Mfr. Part Number
508357
Bearing Type
Ball
Mfr. Warranty Length
2 yr.
Brand
LITTLE GIANT
Motor RPM
1500
Cord Length
9.6 ft.
Motor Type
Split Phase
Diameter
9-1/2 in.
NEC Cord Designation
SJTW
Discharge NPT
1-1/2 in. F
Off Point
1 in. to 4 in.
GPM of Water @ 10 Ft. of Head
42
On Point
7 in. to 10 in.
GPM of Water @ 15 Ft. of Head
26
Pack Quantity
1
GPM of Water @ 20 Ft. of Head
7
Pump HP
4/10
GPM of Water @ 5 Ft. of Head
54
Pump Type
Automatic
Gauge/Conductor
18/3
RPM
1500
Height
6 in.
Shaft Seal
Carbon/Ceramic
Horsepower
4/10
Shaft Seal Material
Carbon, Ceramic
Housing
Cast Bronze
Shipping Weight
20.65 lb.
Housing Material
Cast Bronze
Sump Pump Item
Submersible Sump Pump
Hz
50/60 HZ
Switch Type
Diaphragm
Impeller Material
Glass Filled Polypropylene
Top Material
Polycarbonate
Item
Submersible Sump Pump
Type
Automatic
Maximum Diameter Solids
1/8 in.
Voltage
120 VAC
Maximum Head
23 ft.
Warranty
2 yrs.
General
Body Dia.
9 1/2 in
Flow Rate @ 5 Ft. of Head
54 gpm
Discharge Dia.
1 1/2 in
Nominal Voltage
110 V AC
Discharge Gender
Female
Rated Voltage
115V AC
Discharge Standard
NPT
Shaft Seal Material - Pumps
Carbon, Ceramic
Flow Rate @ 10 Ft. of Head
42 gpm
Switch Actuation
Diaphragm
Flow Rate @ 15 Ft. of Head
26 gpm
Switch Electrical Connection
Integral
Flow Rate @ 20 Ft. of Head
7 gpm

Product Description

These 110V cast-bronze submersible sump pumps have a cast-bronze body that is more corrosion resistant than cast iron and are commonly used to drain water in sump pits. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Pumps have an unpainted finish.

Expertly Selected Product Pairings

Check Valve 1 1/2"
$23.80 pkg | $23.80 ea
Item: 910956-1 | Pkg Qty: 1
Sealant,Thread
$20.47 pkg | $20.47 ea
Item: 913406-5 | Pkg Qty: 1
Check Valve,Tpr,1-1/4 In. Or 1-
$23.34 pkg | $23.34 ea
Item: 915562 | Pkg Qty: 1

Compliance & Restrictions

California Proposition 65 Icon
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
9189193
Sump Pump,4/10 Hp,1-1/2In,23ft
 NameItemDescription
Grainger DropshipGrainger Dropship3P641Sump Pump,4/ 10 HP,1-1/
UNSPSC CODESUNSPSC CODES40151512
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Sump Pump,4/ 10 HP,1-1/

For more product information by email, click here