Share
Print
DAYTON
208 to 240/480 VAC Thermoplastic Centrifugal Pump, 3-Phase, 2" NPT Inlet Size
#918796-4 | Pkg Qty: 1
$515.62 pkg | $515.62 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
Motor Only CSA
Maximum Specific Gravity
1
Amps
3.6-3.2/1.6 A
Mfr. Part Number
5UPW4
Bearing Type
Double Shielded Pre Lubricated Ball
Mfr. Warranty Length
1 yr.
Best Efficiency GPM @ Head
35 @ 46 ft.
Minimum GPM @ Head
26 gpm @60 ft.
Brand
DAYTON
Motor Enclosure
TEFC
Drain Plug
Yes
Motor Type
3-Phase
Duty
Continuous
NEMA/IEC Frame
56J
Frame
56J
Outlet
1-1/2 in.
GPM @ 10 PSI
43
Outlet Size
1-1/2 in. NPT
GPM @ 15 PSI
41
Package Quantity
1
GPM @ 20 PSI
35
Phase
3
GPM @ 25 PSI
30
Port Rotation
90 Degrees Increments
GPM @ 30 PSI
25
Pressure Pump Type
Centrifugal Pump
GPM @ 35 PSI
19
RPM
3450
GPM @ 40 PSI
13
Screw Material
Stainless Steel
GPM of Water @ 2 Ft. of Head
46
Seal Application
Water
Height
11-13/16 in.
Seal Material
Viton, Carbon, Ceramic, Stainless Steel
Horsepower
1/2
Seal Type
Viton Fitted Mechanical Shaft
Housing Material
Thermoplastic
Service Factor
1.1
Hz
60
Shaft Material
Stainless Steel
Impeller Material
Noryl
Shipping Weight
38.38 lb.
Impeller Type
Closed
Shut-Off
64 ft.
Inlet
2 in.
Stages
1
Inlet Pressure
52 psi
Suction Lift
25 ft.
Item
Centrifugal Pump
Type
Self-Priming
Length
18-5/8 in.
Voltage
208 to 240/480 VAC
Maximum Case Pressure
80 psi
Volute Material
Thermoplastic
Maximum Fluid Viscosity
31 SSU
Wetted Materials
Thermoplastic, SS,Viton,Carbon,Ceramic
Maximum Head
64 ft.
Width
6-9/16 in.
Maximum Pressure
28 psi
General
Application
Water Transfer, Dewatering and Lawn Sprinkling for Residential and Commercial Uses
Intake Type
NPT
Best Efficiency Flow
35 gpm
Intake and Discharge Size
2 in , 1 1/2 in
Best Efficiency Head
46 ft of head
Manufacturer Warranty Length
1 yr
Case Pressure (Maximum)
80 psi
Maximum Feet of Head
64 ft
Compatible Discharge Pipe Size
1 1/2 in
Motor Ambient Temperature (Maximum)
104 Degrees F
Compatible Intake Pipe Size
2 in
Motor Enclosure Type
TEFC
Compatible with Media Type
Non-Flammable Liquids
Motor Frame Designation
56J
Discharge Rotation
90 Degrees Increments
Nameplate Voltage
208-240/480V AC
Discharge Type
NPT
Priming
Self-Priming
Features
Stainless Steel Fasteners and Inserts
Pump Housing Material
Plastic
Flow Rate @ 10 psi
43 gpm
Shut Off Pressure (Maximum)
28 psi
Flow Rate @ 15 psi
41 gpm
Specific Gravity (Maximum)
1
Flow Rate @ 20 psi
35 gpm
Suction Lift (Maximum)
20 ft
For Use With
Nonflammable Liquids Compatible with Pump Component Materials
Thermal Overload Protection
Yes
For Use With Potable Systems
No
Wetted Material
Carbon, Ceramic, Stainless Steel, Thermoplastic, Viton
Includes
Manual
Product Description
The fiberglass-reinforced pump body is specially fitted to resist seawater and saltwater. It is durable and corrosion-resistant.
Expertly Selected Product Pairings
$31.36 pkg | $31.36 ea
$11.06 pkg | $11.06 ea
Item Barcode
Pump,Centrifugal,1/2 Hp, 3 Ph
Name | Item | Description | |
---|---|---|---|
Grainger Dropship | 5UPW4 | Pump, Centrifugal, | |
UNSPSC CODES | 40151503 | ||
VMRS (ATA) CODES | 053-006-009 | Pump, Centrifugal, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here