Home All Products SKU: 918212-8
Share  
Print  
DAYTON

208 to 240/480 VAC Totally Enclosed Fan-Cooled Straight Center Discharge Pump, 3-Phase, 3" NPT Inlet

Hover over image to magnify
Centrifugal Pump,7.5 Hp,Max.
Centrifugal Pump,7.5 Hp,Max.

#918212-8 | Pkg Qty: 1

Alternate products displayed may not be identical in style or function to original selection.
Alternate Products
$1,108.27 pkg | $1,108.27 ea
Item: 937284-8
Pkg Qty: 1

Technical Specifications

Key Specifications
Agency Compliance
UL Approval in Motor
Maximum Specific Gravity
1
Amps
18.8-17.8/8.9 A
Mfr. Part Number
12A077
Bearing Type
Double Sealed Ball
Mfr. Warranty Length
1 yr.
Bearings
Double Sealed Ball Bearing
Minimum GPM @ Head
144 gpm @ 90 ft.
Best Efficiency GPM @ Head
260 gpm @ 75 ft.
Motor Enclosure
TEFC
Best Efficiency Range GPM @ Head
210 to 315 gpm @ 82 to 64 ft.
Motor RPM
3450
Brand
DAYTON
Motor Type
3 - Phase
Discharge Pressure
Straight Center Discharge Pump
NEMA/IEC Frame
184JM
Drain Plug
Easily Accessible
Outlet
2-1/2 in. NPT
Duty
Continuous
Outlet Size
2-1/2 in. NPT
Frame
184JM
Pack Quantity
1
Height
13-1/8 in.
Phase
3
Horsepower
7-1/2
Port Rotation
4 Position Increments
Housing Material
Cast Iron
RPM
3450
Hz
60
Screw Material
Zinc Plated
Impeller Material
Bronze
Seal Application
Nonflammable and Nonabrasive Liquids Compatible with Seal Component Materials
Impeller Type
Enclosed
Seal Material
Carbon Ceramic, NBR Elastomer, 304 Stainless Steel
Inlet
3 in. NPT
Seal Type
Mechanical
Inlet Pressure
100 psi
Service Factor
1-1/4
Item
Straight Center Discharge Pump
Shaft Material
Steel
Length
22-1/4 in.
Shipping Weight
200 lb.
Maximum Diameter Solids
0.83 in.
Type
Straight
Maximum Fluid Viscosity
100 SSU
Voltage
208 to 240/480 VAC
Maximum GPM @ Head
410 gpm @ 30 ft.
Volute Material
Cast Iron
Maximum Head
94 ft.
Wetted Materials
Cast Iron, Bronze, Carbon, Cermic, Buna N, StainleStainless Steel Steel
Maximum Liquid Temperature
180°F
Width
11-15/16 in.
Maximum Pressure
40 psi
General
Application
For High Volume Service, For Industrial and Commercial Applications, Such as Process Applications, Dewatering, Irrigation,Chemical Transfer, Decorative Water Features.
Manufacturer Warranty Length
1 yr
Best Efficiency Head
64 to 82 ft
Maximum Media Temperature
180 Degrees F
Compatible Discharge Pipe Size
2 1/2 in
Motor Frame Designation
184JM
Compatible Intake Pipe Size
3 in
Nameplate Voltage
208-230/460V AC
Discharge Rotation
90 Degrees Increments
Pump Housing Material
Cast Iron
Discharge Type
NPT
Shut Off Pressure (Maximum)
40 psi
For Use With
Nonflammable and Nonabrasive Liquids Compatible with Pump Component Materials
Solid Diameter (Maximum)
0.83 in
Impeller Design
Closed
Specific Gravity (Maximum)
1
Intake Type
NPT
Wetted Material
Bronze, Buna-N, Carbon, Cast Iron, Ceramic, Stainless Steel

Product Description

This pump features a continuous-duty motor with enclosed impellers, 4-position port rotation, a replaceable case ring, and easy-access housing drain plugs. It is suitable for process applications, dewatering, irrigation, chemical transfer, decorative water features, and other industrial applications. It does not have overload protection, and requires a pump control box, available separately.

Expertly Selected Product Pairings

Sealant,Thread
$20.47 pkg | $20.47 ea
Item: 913406-5 | Pkg Qty: 1
Magnetic Tip Tape Measure,1 In
$31.36 pkg | $31.36 ea
Item: 915147-2 | Pkg Qty: 1

Compliance & Restrictions

California Proposition 65 Icon
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Documents

Dayton Straight Centrifugal Pump 4ZA35A 12A058 12A075 Replacement Parts List
Dayton Straight Centrifugal Pump 4ZA35 and 4ZA37 OIPM
Item Barcode
9182128
Centrifugal Pump,7.5 Hp,Max.
 NameItemDescription
Grainger DropshipGrainger Dropship12A077Centrifugal Pump,7.5 HP,
UNSPSC CODESUNSPSC CODES40151503
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Centrifugal Pump,7.5 HP,

For more product information by email, click here