Double Acting Tie Rod Style Hydraulic Cylinder; 2 Bore Dia. (In.), 14 Stroke (In.)

Hover over image to magnify
Hyd Cylinder,2 In Bore,14 In
Hyd Cylinder,2 In Bore,14 In

#916952-2 | Pkg Qty: 1

$245.49 pkg | $245.49 ea

Technical Specifications

Key Specifications
Hydraulic Cylinder
Pins and Clips
Pack Quantity
Bore Dia.
2 in
Rod Seal Type
Column Load
7850 lb
Rod Thread Size
Cylinder Style
Single Acting/Double Acting
Double Acting
Max. Pressure
2,500 psi
Temp. Range
-20 Degrees to 220 Degrees F
Pin Dia.
1 in
Tie Rods
High Tensile
Rod Dia.
1 1/4 in

Product Description

Standard-duty tie-rod hydraulic cylinders are double-acting steel cylinders rated to 2500 psi. They are slightly smaller than heavy-duty cylinders. They provide power in both push and pull directions, allowing for more precise positioning than single-acting cylinders. The hard chrome-plated case-hardened steel rod provides smooth movement and a long service life.

Tie-rod hydraulic cylinders are have four rods (bolts) that connect the ends of a double-acting hydraulic cylinder to add strength and stability to the cylinder and prevent it from coming apart under pressure. Double-acting tie-rod hydraulic cylinders provide power in both directions (extending and retracting), which allows for more precise movement. They have a linear actuator and are used in agricultural equipment, industrial machinery, and construction equipment to support, lift, and press heavy loads. Seals can be replaced as needed to keep cylinders in good working order. Clevis mounts on both ends allow the cylinder to be mounted directly to the equipment. The rod end has a clevis attachment that is welded to the body for strength and stability. The piston-side end cap has a clevis bracket for attaching to equipment.

Item Barcode
Hyd Cylinder,2 In Bore,14 In
  Name Item Description
Grainger Dropship Grainger Dropship 6FCU5 Hyd Cylinder, 2 In Bore,14
VMRS (ATA) CODES VMRS (ATA) CODES 053-006-009 Hyd Cylinder, 2 In Bore,14

For more product information by email, click here