Share  
Print  
DAYTON

1/2 HP Submersible Sump Pump, No Switch Included Switch Type, Cast Iron Base Material

Hover over image to magnify
Sump Pump,1/2 Hp,1-1/2" NPT,10
PI_Asset_958469
PI_Asset_958470
Sump Pump,1/2 Hp,1-1/2" NPT,10
PI_Asset_958469
PI_Asset_958470

#915987-7 | Pkg Qty: 1

$230.18 pkg | $230.18 ea

Drop Ship Item

Shipping to 60045

Technical Specifications

Key Specifications
Agency Compliance
CSA
Maximum Head
30 ft.
Alarm
No
Maximum Liquid Temperature
104°F
Alarm Included
No
Maximum Temperature (Deg. F)
104
Amps
6.8 A
Mechanical Seal
SiC
Base Material
Cast Iron
Mfr. Part Number
4HU69
Bearing Type
Dual Ball
Minimum Sump Pit Diameter
12 in.
Brand
DAYTON
Motor RPM
3450
Cord Length
10 ft.
Motor Type
Permanent Split Capacitor
Diameter
8-1/2 in.
NEC Cord Designation
SJTOW
Discharge NPT
1-1/2 in. F
Pack Quantity
1
Duty
Continuous
Pump Body Material
Cast Iron
GPM of Water @ 10 Ft. of Head
57
Pump HP
1/2
GPM of Water @ 15 Ft. of Head
45
Pump Type
Manual
GPM of Water @ 20 Ft. of Head
30
RPM
3450
GPM of Water @ 25 Ft. of Head
15
Shaft Material
Stainless Steel
GPM of Water @ 5 Ft. of Head
65
Shaft Seal
Silicon Carbide
Gauge/Conductor
18/3
Shaft Seal Material
Carbon Ceramic
Height
11-3/4 in.
Shipping Weight
28.2 lb.
Horsepower
1/2
Sump Pump Item
Submersible Sump Pump
Housing
Cast Iron
Switch Type
None
Housing Material
Cast Iron
Thermal Protection
Yes
Hz
60 HZ
Top Material
Cast Iron
Impeller Material
Cast Iron
Type
Manual
Item
Submersible Sump Pump
Voltage
120 VAC
Maximum Diameter Solids
1/2 in.
General
Body Dia.
8 1/2 in
Min. Sump Pit Dia.
12 in
Discharge Dia.
1 1/2 in
Nominal Voltage
110 V AC
Discharge Gender
Female
Rated Voltage
120V AC
Discharge Standard
NPT
Shaft Seal Material - Pumps
Carbon Ceramic
Flow Rate @ 10 Ft. of Head
57 gpm
Standards
CSA
Flow Rate @ 15 Ft. of Head
45 gpm
Switch Actuation
No Switch Included
Flow Rate @ 20 Ft. of Head
30 gpm
Switch Electrical Connection
No Switch Included
Flow Rate @ 5 Ft. of Head
65 gpm

Product Description

These 110V submersible sump pumps have a cast-iron body that helps dissipate heat as the pump drains water from sump pits. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Pumps have a painted or powder-coated finish to protect the body from corrosion.

Compliance & Restrictions

California Proposition 65 Icon
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
9159877
Sump Pump,1/2 Hp,1-1/2" NPT,10
 NameItemDescription
Grainger DropshipGrainger Dropship4HU69Sump Pump,1/ 2 HP,1-1/2"
UNSPSC CODESUNSPSC CODES40151512
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Sump Pump,1/ 2 HP,1-1/2"

For more product information by email, click here