Share  
Print  
DAYTON

3/4 HP, Convertible Jet Pump System, 18/9 Amps, 14.9 gpm Flow Rate at 10 Ft. Lift at 40 PSI

Hover over image to magnify
Convertible Jet Pump Sys,3/4HP,
Convertible Jet Pump Sys,3/4HP,

#915242-5 | Pkg Qty: 1

$1,130.07 pkg | $1,130.07 ea
Pricing is subject to change without notice

Drop Ship Item

Shipping to 60045

Technical Specifications

Key Specifications
Amps
18/9
Maximum Operating Temperature
90
Brand
DAYTON
Mfr. Part Number
5UXL2
Compliance
CSA-US
Motor Enclosure
ODP
Discharge
1 in. NPT
Motor Type
Capacitor Start
GPM of Water @ 10 Ft @ 30, 50 PSI
15.2<lt/>SNF/<gt/>14.3
NPT Inlet
1 1/4
GPM of Water @ 15 Ft @ 30, 50 PSI
13.1<lt/>SNF/<gt/>12.5
Number of Stages
1
GPM of Water @ 20 Ft @ 30, 50 PSI
11.1<lt/>SNF/<gt/>10.1
Outlet
1 in. NPT
GPM of Water @ 25 Ft @ 30, 50 PSI
8.4<lt/>SNF/<gt/>7.8
Overall Height
24-3/16
GPM of Water @ 5 Ft @ 30, 50 PSI
17<lt/>SNF/<gt/>15.8
Package Quantity
1
GPM of Water @ 70 Ft @ 30, 50 PSI
8.5<lt/>SNF/<gt/>5.5
Pressure Switch Setting
30 to 50 psi
Horsepower
3/4
Seal Type
Mechanical
Inlet
1-1/4 in. NPT
Shipping Weight
44 lb.
Item
Convertible Jet Pump System
Shut-Off
65 psi
Material of Construction
Cast Iron
Tank (Gal.)
17
Maximum Inlet Pressure
123
Voltage
115/230
General
Application
Use Only With Nonflammable Liquids Compatible With Pump Component Materials And In Nonflammable/Non Explosive Atmospheres. Can Be Used For Shallow Or Deep Well Applications Depending On The Ejector, Sold Separately.
Inlet Dia.
1 1/4 in
Discharge Standard
NPT
Inlet Standard
NPT
Flow Rate @ 10 Ft. Lift @ 30 PSI
15.0 gpm
Max. Suction Lift
110 ft
Flow Rate @ 10 Ft. Lift @ 40 PSI
14.9 gpm
Nominal Voltage
110V AC, 230V AC
Flow Rate @ 10 Ft. Lift @ 50 PSI
14.1 gpm
Rated Voltage
115/230V AC
HP
3/4 hp
Shut Off Pressure
65 psi
Includes
Pump and Tank, Requires Ejector Sold Separately (see accessories depending on application)
Tank Bladder Pressure
28 psi

Product Description

Convertible well jet pump systems are for use in shallow wells or deep wells depending on the ejector selected. They eliminate the need to connect to a municipal water source and come with precharged pressure tanks that allow water to flow consistently at a desired pressure. Cast-iron pump systems come with a pressure gauge and are for use in shallow or deep wells up to 140 ft. deep depending on the selected ejector. Thermoplastic pumps systems have a pressure gauge, built-in pressure regulator, and are for use in shallow or deep wells up to 100 ft. deep depending on the selected ejector. All pumps are mounted above ground for repair and maintenance compared to submersible well pumps that are installed in the well and need to be removed from the well for inspection. Jet pumps are not subject to pump twisting found in submersible pumps that causes them to strike against and damage the sides of the well casing. Pumps are connected to an ejector, pressure tank, and control panel to automatically supply water as needed.

Expertly Selected Product Pairings

Mech. Seal
$93.00 pkg | $93.00 ea
Item: 927466-4 | Pkg Qty: 1

Item Barcode
9152425
Convertible Jet Pump Sys,3/4HP,
 NameItemDescription
Grainger DropshipGrainger Dropship5UXL2Convertible Jet Pump Sys,
UNSPSC CODESUNSPSC CODES40151511
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Convertible Jet Pump Sys,

For more product information by email, click here