Share
Print
DAYTON
2-HP Self Priming Centrifugal Pump, 72 ft. Max. Head, 1/8" Max. Dia. Solids, Cast Iron
Hover over image to magnify
#914106-5 | Pkg Qty: 1
$939.37 pkg | $939.37 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
c UL us
Maximum Liquid Temperature
200°F
Amps
5.9-5.2/2.5 A
Maximum Pressure
31.1 psi
Bearing Type
Ball
Maximum Specific Gravity
1
Best Efficiency GPM @ Head
76 gpm @ 56 ft.
Mfr. Part Number
4UA77
Best Efficiency Range GPM @ Head
58 to 100 gpm @ 60 to 46 ft.
Mfr. Warranty Length
1 yr.
Brand
DAYTON
Minimum GPM @ Head
24 gpm @ 70 ft.
Drain Plug
Easily Accessible
Motor Design
3-Phase
Duty
Continuous
Motor Enclosure
ODP
Frame
56J
Motor RPM
3500
GPM of Water @ 10 Ft. of Head
Motor Type
Three Phase
GPM of Water @ 15 Ft. of Head
130
NEMA/IEC Frame
56J
GPM of Water @ 20 Ft. of Head
128
Outlet
2 in. NPT
GPM of Water @ 25 Ft. of Head
126
Outlet Size
2 in. NPT
GPM of Water @ 30 Ft. of Head
124
Pack Quantity
1
GPM of Water @ 40 Ft. of Head
109
Phase
3
GPM of Water @ 50 Ft. of Head
92
Port Rotation
No
GPM of Water @ 60 Ft. of Head
63
RPM
3450
GPM of Water @ 70 Ft. of Head
13
Screw Material
Zinc Plated
Height
9-1/8 in.
Seal Application
Non-Flammable and Non-Abrasive Liquids Compatible with Seal Component Materials Up to 180° F
Horsepower
2
Seal Material
Carbon Ceramic-Buna N
Housing Material
Cast Iron
Seal Type
Mechanical
Hz
60
Self-Priming
Yes
Impeller Material
Cast Iron
Service Factor
1.2
Impeller Type
Semi Open
Shaft Material
Stainless Steel
Inlet
2 in. NPT
Shipping Weight
55 lb.
Inlet Pressure
100 psi
Suction Lift
20 ft.
Item
Centrifugal Pump
Type
Self Priming
Maximum Case Pressure
165 psi
Voltage
208 to 230/460 VAC
Maximum Diameter Solids
1/8 in.
Volute Material
Cast Iron
Maximum Fluid Viscosity
100 SSU
Wetted Materials
Cast Iron, Buna N, Carbon, Ceramic
Maximum GPM @ Head
130 gpm @ 15 ft.
Width
6-7/8 in.
Maximum Head
72 ft.
General
Application
For High-Volume Industrial and Commercial Applications Including Liquid and Chemical Transfer, Irrigation, Dewatering, and Processing Application
Includes
Manual
Best Efficiency Flow
58 to 100 gpm
Intake Type
NPT
Best Efficiency Head
46 to 60 ft
Intake and Discharge Size
2 in , 2 in
Compatible Discharge Pipe Size
2 in
Maximum Feet of Head
72 ft
Compatible Intake Pipe Size
2 in
Minimum Media Temperature
40 Degrees F
Discharge Type
NPT
Motor Enclosure Type
ODP
Flow Rate @ 15 ft of Head (Maximum)
118 gpm
Motor Frame Designation
56J
Flow Rate @ 20 ft of Head (Maximum)
115 gpm
Nameplate Voltage
208-230/460V AC
Flow Rate @ 30 ft of Head (Maximum)
108 gpm
Nominal Voltage
208-230/460V AC
Flow Rate @ 40 ft of Head (Maximum)
99 gpm
Pump Housing Material
Cast Iron
Flow Rate @ 50 ft of Head (Maximum)
89 gpm
Shut Off Pressure (Maximum)
31 psi
Flow Rate @ 60 ft of Head (Maximum)
64 gpm
Solid Diameter (Maximum)
0.13 in
For Use With
Non-Flammable/Non-Abrasive Liquids, Compatible with Pump Material
Specific Gravity (Maximum)
1
For Use With Potable Systems
No
Suction Lift (Maximum)
20 ft
Impeller Design
Semi-Open
Wetted Material
Buna-N, Carbon, Cast Iron, Ceramic
Product Description
Designed for high-volume industrial and commercial applications, including liquid and chemical transfer, irrigation, dewatering, and processing. Mechanical seals are made from carbon, ceramic, and Buna N. Replacement seals are available separately.
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Documents
Item Barcode
Pump,Centrifugal,2 Hp
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 4UA77 | Pump, Centrifugal, |
 | UNSPSC CODES | 40151503 | |
 | VMRS (ATA) CODES | 053-006-009 | Pump, Centrifugal, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here