Share
Print
DAYTON
1/3 HP Submersible Sump Pump, No Switch Included Switch Type, Cast Iron Base Material
#913654-6 | Pkg Qty: 1
$170.21 pkg | $170.21 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
CSA
Maximum Diameter Solids
1/4 in.
Alarm
No
Maximum Head
29 ft.
Alarm Included
No
Maximum Liquid Temperature
104°F
Amps
3.8 A
Maximum Temperature (Deg. F)
104
Base Material
Cast Iron
Mechanical Seal
CRB/CMC
Bearing Type
Ball
Mfr. Part Number
1XHV6
Brand
DAYTON
Minimum Sump Pit Diameter
8 in.
Cord Length
13-3/4 in.
Motor RPM
3450
Diameter
7-1/2 in.
Motor Type
Permanent Split Capacitor
Discharge NPT
1-1/2 in. F
NEC Cord Designation
SJTW
Duty
Continuous
Pack Quantity
1
GPM of Water @ 10 Ft. of Head
46
Pump Body Material
Aluminum
GPM of Water @ 15 Ft. of Head
31
Pump HP
1/3
GPM of Water @ 20 Ft. of Head
19
Pump Type
Manual
GPM of Water @ 25 Ft. of Head
9
RPM
3450
GPM of Water @ 30 Ft. of Head
2
Shaft Material
SS
GPM of Water @ 5 Ft. of Head
58
Shaft Seal
(2) Carbon/Ceramic, (1) Buna N
Gauge/Conductor
18/3
Shaft Seal Material
Buna-N, Carbon, Ceramic
Height
13-3/4 in.
Shipping Weight
20.75 lb.
Horsepower
1/3
Sump Pump Item
Submersible Sump Pump
Housing
Aluminum
Switch Type
None
Housing Material
Aluminum
Thermal Protection
Yes
Hz
60
Top Material
Cast Aluminum
Impeller Material
Engineered Polymer
Type
Manual
Item
Submersible Sump Pump
Voltage
120 VAC
General
Body Dia.
7 1/2 in
Min. Sump Pit Dia.
8 in
Discharge Dia.
1 1/2 in
Nominal Voltage
110 V AC
Discharge Gender
Female
Rated Voltage
120V AC
Discharge Standard
NPT
Shaft Seal Material - Pumps
Buna-N, Carbon, Ceramic
Flow Rate @ 10 Ft. of Head
46 gpm
Standards
CSA
Flow Rate @ 15 Ft. of Head
31 gpm
Switch Actuation
No Switch Included
Flow Rate @ 20 Ft. of Head
19 gpm
Switch Electrical Connection
No Switch Included
Flow Rate @ 5 Ft. of Head
58 gpm
Product Description
These 110V aluminum submersible sump pumps have an aluminum body that's lightweight and provides good corrosion resistance. They are commonly used to drain water in sump pits. Pumps are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
Item Barcode
Sump Pump,1/3 Hp,1-1/2" NPT,10
Name | Item | Description | |
---|---|---|---|
Grainger Dropship | 1XHV6 | Sump Pump,1/ 3 HP,1-1/2" | |
UNSPSC CODES | 40151512 | ||
VMRS (ATA) CODES | 053-006-009 | Sump Pump,1/ 3 HP,1-1/2" |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here