Share  
Print  
DAYTON

1/2 HP Submersible Sump Pump, Tether Switch Type, Stainless Steel Base Material

Hover over image to magnify
Sump Pump 1/2 Hp, Stn Stl Sub
PI_Asset_950604
PI_Asset_950605
Sump Pump 1/2 Hp, Stn Stl Sub
PI_Asset_950604
PI_Asset_950605

#910946-9 | Pkg Qty: 1

$379.45 pkg | $379.45 ea

Drop Ship Item

Shipping to 60045

Technical Specifications

Key Specifications
Alarm
No
Maximum Head
23.5 ft.
Alarm Included
No
Maximum Liquid Temperature
104°F
Amps
4.1 A
Maximum Temperature (Deg. F)
104
Base Material
Stainless Steel
Mechanical Seal
Buna N
Bearing Type
Lubricated Ball
Mfr. Part Number
3YU75
Brand
DAYTON
Minimum Sump Pit Diameter
12 in.
Cord Length
15 ft.
NEC Cord Designation
SJOW
Diameter
9-1/2 in.
Off Point
8-5/16 in.
Discharge NPT
1-1/4 in. M
On Point
15 in.
Duty
Continuous
Pack Quantity
1
GPM of Water @ 10 Ft. of Head
25
Pump Body Material
Stainless Steel
GPM of Water @ 15 Ft. of Head
15
Pump HP
1/2
GPM of Water @ 20 Ft. of Head
7
Pump Type
Automatic
GPM of Water @ 5 Ft. of Head
34
Shaft Material
Stainless Steel
Gauge/Conductor
18/3
Shaft Seal
Buna N
Height
11 in.
Shaft Seal Material
Buna-N
Horsepower
1/2
Shipping Weight
15.55 lb.
Housing
Stainless Steel
Sump Pump Item
Submersible Sump Pump
Housing Material
Stainless Steel
Switch Type
Tether
Hz
60
Top Material
Stainless Steel
Impeller Material
Stainless Steel
Type
Automatic
Item
Submersible Sump Pump
Voltage
120 VAC
Maximum Diameter Solids
3/4 in.
General
Body Dia.
9 1/2 in
Includes
90 Degrees 1 1/4" NPT Discharge Elbow
Discharge Dia.
1 1/4 in
Min. Sump Pit Dia.
12 in
Discharge Gender
Male
Nominal Voltage
110 V AC
Discharge Standard
NPT
Rated Voltage
115V AC
Flow Rate @ 10 Ft. of Head
25 gpm
Shaft Seal Material - Pumps
Buna-N
Flow Rate @ 15 Ft. of Head
15 gpm
Switch Actuation
Tether Float
Flow Rate @ 20 Ft. of Head
7 gpm
Switch Electrical Connection
Piggyback
Flow Rate @ 5 Ft. of Head
34 gpm

Product Description

These 110V stainless-steel submersible sump pumps come with a stainless-steel body that is more corrosion resistant than cast iron and are commonly used to drain water in sump pits. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Pumps have an unpainted finish.

Expertly Selected Product Pairings

Check Valve 1 1/2"
$23.80 pkg | $23.80 ea
Item: 910956-1 | Pkg Qty: 1
Check Valve,Tpr,1-1/4 In. Or 1-
$23.34 pkg | $23.34 ea
Item: 915562 | Pkg Qty: 1
Suction Hose,1-1/2 In x 20 Ft,
$92.96 pkg | $92.96 ea
Item: 924109-7 | Pkg Qty: 1
Nipple,1 1/4 X 4", PVC
$3.67 pkg | $3.67 ea
Item: 932257-8 | Pkg Qty: 1

Compliance & Restrictions

California Proposition 65 Icon
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
9109469
Sump Pump 1/2 Hp, Stn Stl Sub
 NameItemDescription
Grainger DropshipGrainger Dropship3YU75SUMP PUMP 1/2HP STN ST
UNSPSC CODESUNSPSC CODES40151512SUMP PUMP
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009SUMP PUMP

For more product information by email, click here