DOT Approved Male Run Tee, Air Brake Push-To-Connect Fitting, Brass, 1/4" x 1/4"

Hover over image to magnify
A/B Push Ml Run TEE1/4X1/4
A/B Push Ml Run TEE1/4X1/4
DOT Approved Male Run Tee, Air Brake Push-To-Connect Fitting, Brass, 1/4" x 1/4" Video

#791251 | Pkg Qty: 10

Technical Specifications

Pack Quantity
Connection Type
Pipe Thread
1/4 in.
DOT Approved
Run Tee
Fitting Type
Shipping Weight
1.13 lb.
Gasket Material
Ethylene Propylene
System of Measurement
Temperature Range (Deg. F)
-40 to +200 deg. F
Hex Size
9/16 in.
Tube Outside Diameter
1/4 in.
Air Brake
Vibration Resistance
Working Pressure
Up to 150 psi
Meets Standards
D.O.T. FMVSS 571.106 and SAE J1131

Product Description

Parker® Brass Push In Air Brake Fitting
  • Swivel Male Run Tee.
  • Quick Disconnect Simply Push Tubing In, No Tools Or Loose Parts To Handle In Tight Places.
  • Full Flow Design, Provides Up To 60% More Flow Area Than Conventional Fittings With Internal Tube Supports.
  • Brass Construction. Elbows And Tees Are Forged Brass.
  • Swivel Elbow And Tees For Ease Of Orientation.
  • Pre-Applied PTFE Based Pipe Sealant On All Male Pipe Threads.
  • Dot Approved.
  • Typical Applications: Windows, Door Locks, Mirrors, Wipers, Air Operated Seats, Operating Gauges, Air Horns, Heater Controls, Gear Shifts, Fifth Wheels, And Air Brake Connections.
  • Working Pressure: 250 Psi
  • Temperature Range: -20° F. To 200° F.
  • Applicable Standards: Fmvss-106
  • For Use With: Sae J844 Type A And B.
  • Tube Outside Diameter: 1/4
  • Male Thread: 1/4
  • Table Here--

Compliance & Restrictions

California Proposition 65 Icon
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
Item Barcode
A/B Push Ml Run TEE1/4X1/4
  Name Item Description
UNSPSC CODES UNSPSC CODES 27131600 Air fittings and connectors
VMRS (ATA) CODES VMRS (ATA) CODES 053-008-004 A/B TEE 1/4 X 1/4

For more product information by email, click here