- Abrasives
- Air Brake
- Assortments
- Building & Grounds
- Chemicals
- Cutting Tools
- Electrical
- Fasteners
- Furniture & Office Supplies
- HVACR
- Hardware
- Hose & Hose Ends
- Hydraulics
- Janitorial
- Lighting
- Material Handling
- Paint & Paint Supplies
- Pipe, Tubing & Fittings
- Plumbing
- Pneumatics
- Pumps
- Raw Materials
- Safety
- Steel Equipment & Storage
- Tape
- Tools
- Vehicle & Trailer Parts
- Welding
- Wheel & Tire
1-5/16"-12 Elbow, 90° with JIC Fitting Connection Type and 6000 psi Max. Pressure
| Item Number | 97221 |
| Scanner Description | Jic 90'SW.Nut Elb.1" |
| Weight | 1 lb |
| Brand | APPROVED SUPPLIER |
| Catalog | F20 |
Pkg Qty: 2
Technical Specifications
| Angle | 90 deg. | Material | Carbon Steel - AISI/SAE 12L14 | |
| Basic Fitting Material | Metal | Material of Construction | Carbon Steel | |
| Basic Fitting Shape | Elbow | Shape | Swivel Nut Elbow | |
| Body Material | Carbon Steel | System of Measurement | Fractional | |
| Brand | APPROVED SUPPLIER | Temperature Range (Deg F) | -65 to +400 deg. F | |
| DOT Approved | No | Thread Size | 1-5/16"-12 | |
| Finish | Trivalent Zinc Plated | Thread Style | SAE | |
| Fitting Style | JIC | Tube Flare | 37 deg. | |
| Grade | 12L14 | Tube Outside Diameter | 1 in. | |
| Heat Treated | No | Vibration Resistance | Good | |
| Item | Flared Fitting | Working Pressure | Up to 6,000 psi |
Product Description
- Working pressure up to 10,000 psi, depending on tube and fitting size.
- Used with copper, brass, steel, aluminum, and other tubing that can be flared.
- Applications include medium and high pressure lines on heavy construction, agricultural, and transportation equipment.
- Meets or exceeds ASA, ASME, SAE, and MS specifications.
- Good resistance to vibration. Use two or three piece nut design where greater vibration resistance is required.
- Tube Outside Diameter: 1"
- Thread Size: 1-5/16–12
- Cross Reference: TF5506 x 16
- Assembly Instructions:
- Slide nut on tubing. Threaded end of nut must face out.
- Slide sleeve on tubing (3-piece assembly). Collar end of sleeve must face out.
- Flare tubing and check flare diameter. Examine for excessive thin-out. On thin wall tubing, use double flare to prevent pinch-off.
- Assemble tubing to fitting body. Tube nut should be turned hand tight.
- Tighten assembly with a wrench.
 |  |
| 2-Piece Nut Assembly | 3-Piece Nut Assembly |
Item Barcode
- Cross References
- Legal
| Name | Item | Description | |
|---|---|---|---|
|
WEATHERHEAD | C5506X16 | STEEL FIT 37TF5506X16 |
|
|
WEATHERHEAD | TF5506X16 | STEEL FIT 37 TF5506X16 |
|
UNSPSC CODES | 40183101 | STEEL FIT 37 TF5506X16 |
|
VMRS (ATA) CODES | 053-008-004 | STEEL FIT 37 TF5506X16 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here
Track Order Status
Connect with us. 1-800-558-2808
How are we doing? Let us know
Try the Mobile App.
On the go? We have an app for that.
