Fleet Maintenance Supply Experts 1-800-558-2808
Jic 90'SW Bent Tube Elbow 1/2"

JIC 90'sw Bent Tube Elbow 1/2"

Item Number 96495
Scanner Description Jic 90'SW Bent Tube Elbow 1/2"
Weight 0.51 lb
Brand APPROVED SUPPLIER
Pkg Qty: 2

Add to List

Technical Specifications

Brand APPROVED SUPPLIER

Product Description

  • Working pressure up to 10,000 psi, depending on tube and fitting size.
  • Used with copper, brass, steel, aluminum, and other tubing that can be flared.
  • Applications include medium and high pressure lines on heavy construction, agricultural, and transportation equipment.
  • Meets or exceeds ASA, ASME, SAE, and MS specifications.
  • Good resistance to vibration. Use two or three piece nut design where greater vibration resistance is required.
  • Tube Outside Diameter: 1/2
  • Thread Size: 3/416
  • Cross Reference: TF5506 x 8
  • Assembly Instructions:
  • Slide nut on tubing. Threaded end of nut must face out.
  • Slide sleeve on tubing (3-piece assembly). Collar end of sleeve must face out.
  • Flare tubing and check flare diameter. Examine for excessive thin-out. On thin wall tubing, use double flare to prevent pinch-off.
  • Assemble tubing to fitting body. Tube nut should be turned hand tight.
  • Tighten assembly with a wrench.
  • TABLE HERE--

Item Barcode

0964950
  Name Item Description
WEATHERHEAD WEATHERHEAD N/A
UNSPSC CODES UNSPSC CODES 40183101
VMRS (ATA) CODES VMRS (ATA) CODES 053-008-004 STEEL FIT 37 BENT TUBE 37

For more product information by email, click here

Feedback