Share
Print
APPROVED SUPPLIER
10010B-Y10 Barb Tite End
Hover over image to magnify
Technical Specifications
Brand
APPROVED SUPPLIER
Material
Brass
Grade
CA360
Package Quantity
10
Hose Cutoff Factor
1-3/4 in.
Series
100 'B' Series Barb-Tite
Hose Hex Size
5/8 in.
Shipping Weight
1.36 lb.
Hose Inside Diameter
5/8 in.
System of Measurement
Fractional
Item
Hose Mender
Working Pressure
Determined by maximum working pressure for hose size
Product Description
Low Pressure Hose Mender Barb-Tite Hose End
- 100 'B' Series.
- Material: Ca360 Brass
- Hose Inside Diameter: 5/8
- Cut-Off Factor: 1-3/4
- Applications: Low Pressure Shop Or Service Air Lines.
- Cross Reference: 10010B-Y10
- For Use With H100 , H101 , And H201 Hose. To Assemble. Lubricate Insert. Hold Hose At Angle And Push On And Up Over First Barb. Continue To Push Straight On Until Hose Is Seated Under Protective Plastic Cap. To Disassemble. Split Hose, But Do Not Cut Completely Through Hose Because The Sealing Edge Of Barb Could Be Damaged. Bend Hose And Remove With Quick Pull.
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Lot Tracked Item Details
Item Barcode
Barb Hose Mender - 5/8"
| Name | Item | Description | |
|---|---|---|---|
 | UNSPSC CODES | 40141700 | BARB-TITE 10010B-Y10 |
 | VMRS (ATA) CODES | 053-008-004 | Fittings |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here